grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
pecifications: Copper wire scrap, (Millberry) 99.99% at a purity of 99.98% min and 99.99% max Copper: 99.9% Carbon: 0.03% Coblet:
R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
Item: Copper Wire Grade: C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70620, C71000,C71500,C71520,C71640,C72200,T1,T2,T3,etc Standard: JIS ASTM DIN EN ISO Diameter 0.1-5mm/custom Length custom Surface mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc Application Building, industry etc Payment Terms 30% T/T in advance as deposit,70% balance against the B/L copy or 100% irrevocable L/C at sight Delivery time 5-15 days after receiving L/C or deposit Remark Specific requirement of alloy grade,temper or specification can be discussed at your request
1. Berry copper wire scrap conforming to ISRI standards/specs. 2. Minimum order quantity: 200 Metric tons. The seller can offer 1000MT - 2000MT per month / per shipment on a long term basis ( for quantities greater than the above mentioned, please write to us in detail ) 3. Origin of scrap wire ( either S.A / Europe / Russia ) seller's option. 4. SOP: Letter of Intent with Bank Confirmation letter from the Buyer (trading companies). If the buyer-importer is end-user/consumer, BCL is not required but due to manufacturing licence/end products' details and other information as required before the execution of a contract. 5. Price $5500pmt CFR one safe port 6. Delivery/shipment - shall be provided after the receipt of LoI with BCL and due diligence. 7. Payment terms by Irrevocable, confirmed Letter of credit from first-class/internationally recognized bank
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
Material:Copper Wire Scrap Grade Purity:99.95%-99.99% Copper Wire Scrap Application:Electric Wire Copper Wire Scrap:Copper Wire Scrap 99.9% Purity Bulk Shape:99%/Metal Scrap Grade:Certificated High Pure Cu Wire Diameter:0.20mm 0.25mm 0.30mm Color:Bright Red Millberry Cu Content (%):99.95 - 99.99% Type: Copper Wire Place of Origin: CN;SHN Brand Name: SDLF Model Number: scrap copper Copper content: 99.95%-99.99%
Copper Wire Scrap, (Millberry Copper) 99% High Purity Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick,
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
HMS 2- ISRI CODE 203: Heavy Melting Steel Wrought Iron or Steel scrap, black & galvanized, 1/8 inch and over in thickness, Charging Box size to include material not suitable as no. 1 heavy melting Steel prepared in a manner to insure compact charging. Russia, USA, Saudi, Poland, South Africa, Thailand,malaysia,ukraine,europe, Germany, Spain SPECIFICATION: High Quality Heavy Melting Scrap (HMS 1& 2). Composition: 80:20 (HMS 1:HMS 2) ISRI CODE : 200-206 Free from radiation & explosive materials.
Copper Wire Scrap We have been engrossed in manufacturing and supplying top notch range of Copper Wire Scrap. The offered scrap is processed and segregated by our deft professionals with the aid of pioneering techniques. This scrap is used for manufacturing of copper wires that is used in binding of electric motors. Additionally, the provided Copper Wire Scrap can be bought from us in various specification according to need of clients at pocket friendly rates. Product Description Chemical composition (%): Copper scrap Cu: Bi: Sb: As: Fe: Ni: Pb: Sn: S: O: Zn: P 99.95 0.002 0.002 0.002 0.0050. 0020. 0050. 0020. 0050. 0020. 0050. 001 Wire diameter: 2.5-3 mm Weight/spools: 3, 5, 7, 15, 20kg Tensile strength: 1000, 900, 500, 450N/mm2 Standard and purity of hot sale 99.9% purity copper wire scrap
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Name: Copper wire scrap Purity (%): 99.99 Carbon: 0.03 Cobalt: 0.001 Iron: 0.005 Phosphorus: 0.01 Sulphur: 0.01 Zinc: 0.003
(Millberry) 99.78% at a purity of 99.78% min. 99.78%Max. COPPER: 99, 9% CARBON: 0.03% COBLET:
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
Copper Wire Scrap Millberry 99.99% Purity Grade A
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
Copper wire scrap , ............................................................. in bulk or in bags ...............................................................
ype Copper Wire Copper Content 99.99% Product Name Pure Copper Wire Scrap 99.99% Grade Top Grade Purity 99.99% Purity Copper Wire Scrap Copper Wire Scrap 99.9% Purity Bulk Appearance Bright Copper Wire Color Red Yellow Application Electric Wire Material Copper Wire 1# 2# Shape 99%/Metal Scrap
Essential details Type: Red Copper Wire Application: wire cutting edm Grade: C10100/C10200 Cu (Min): 99% Alloy Or Not: Non-Alloy Ultimate Strength (â?¥ MPa): 900-1080n/mm Place of Origin: AUSTRIA Model Number: customized Processing Service: Bending, Decoiling, Welding, Punching, Cutting Product name: High Purity Copper Wire 99.99% Material: 99.995% Pure Copper Top Quality: Cooper Wire GRADE 99.99% Key word: Copper Wire Scrap 99.99 Purity: 99.95%-99.99%Copper Wire Scrap MOQ: 1ton Surface: Polished DELIVERY TIME: 7-15 Days Thickness: 0.1mm~200mm PRICE TERM: CIF CFR FOB EX-WORK Supply Ability Supply Ability 1000 Ton/Tons per Month Packaging & delivery Packaging Details Standard Sea-worthy Packing Picture Example: package-img Lead time: Quantity(tons) 1 - 1 2 - 7 8 - 15 >15 Lead time (days) 5 10 21 To be negotiated
