R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
PRODUCT SPECIFICATIONS: Heavy melting steel (HMS) or heavy melting scrap is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. HMS is typically traded as a blend of 1 and 2, either a premium blend (80/20) or lower grade mixes (70/30) and (60/40). For example, HMS 1 and 2 (80/20) should consist of HMS 1 and 2 in the ratio of 80% (HMS 1) and 20% (HMS 2). Each grade guarantees a minimum piece thickness: at least 1/4 inch (6.3 mm) for HMS 1, and 1/8 in for HMS 2 Payment Method: Bank Transfer (TT) , WESTERN UNION, RIA, CRYPTO CURRENCY NB: We don't accept LC Payment Terms : 20% against Invoice and 80% against BL HMS 1 and 2 specifications as defined by ISRI (North America's Institute of Scrap Recycling Industries): ISRI SPEC 200 (HMS 1) Wrought iron and/or steel scrap 1/4 inch and larger in thickness. All pieces must be smaller than 60.24 in. ISRI SPEC 201 (HMS 1) Same as ISRI 200 except pieces must be smaller than 36.18 in. ISRI SPEC 202 (HMS 1) Same as ISRI 200 except pieces must be smaller than 60.18 in. ISRI SPEC 203 (HMS 2) Wrought iron and/or steel scrap, black and galvanized, 1/8 inch and larger in thickness. ISRI SPEC 204 (HMS 2) Same as ISRI 203 except pieces must be smaller than 36.18 in. ISRI SPEC 205 (HMS 2) Same as ISRI 204 except it may contain automotive scrap, except for thin guage material. ISRI SPEC 206 (HMS 2) Same as ISRI 205 except pieces must be smaller than 60.18 in.
Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Hallo we have ready stock Iron scrap Origin - Philippine Factory Dismantled Scrap Quantity - 8,50,000 MT Buyer can visit site after sign SPA and Provide BCL Payment - LC Interested importers kindly contact NO LONG CHAIN BROKERS PLEASE Direct buyers , Mandates , Intermediaters who knows the end buyer well are welcome first to First come sale MOQ 50k MT Partial shipment acceptable
HMS Scrap Product origin : Russia and Non Russia
HMS 2- ISRI CODE 203: Heavy Melting Steel Wrought Iron or Steel scrap, black & galvanized, 1/8 inch and over in thickness, Charging Box size to include material not suitable as no. 1 heavy melting Steel prepared in a manner to insure compact charging. Russia, USA, Saudi, Poland, South Africa, Thailand,malaysia,ukraine,europe, Germany, Spain SPECIFICATION: High Quality Heavy Melting Scrap (HMS 1& 2). Composition: 80:20 (HMS 1:HMS 2) ISRI CODE : 200-206 Free from radiation & explosive materials.
1. When you just fill a pool of new water, it rains heavily suddenly, which makes you very depressed. Whether you still want to go on swimming. Swimming pool cover can keep out wind and rain and snow and ice for you,Any weather can not affect you enjoy into the water. 2.You are a swimming lover. Whether you particularly hope to extend your summer time. Swimming pool cover can expend your swimming season,you can enjoy the fun of useful under the transparent pool room which provided UV protection,Or you can directly open the swimming pool cover,Shared with family or friends at the water's edge which have health and comfortable swimming environment throughout the year. 3, UV resistant 50 microns UV resistant layer, let you skin not sunburn and peeling after swimming. 4.When you are making delicious food in your kitchen, your children may be ready to go swimming personal. Whether you want a special door to lock your swimming pool at that time, Limited the children close to the pool,prevent children or animals fell into the pool, The Whole family will be assured. 5.In order not to waste water, you are not willing to see worms and leaves in your swimming pool ! 6, constant temperature swimming No matter how cold in the winter, we can provide you with the pool heating equipment, keep your swimming pool constant temperature forever! Today, we offer you an amazing view in your garden---- a modern, comfortable and safe swimming pool roofing! Whether in front of your balcony or in the middle of your garden, the roofing can mix harmoniously together with surrounding environment without obstructing your view.
1. Available in different models 2. CNC machined precision pivot pins 3. Glass to Glass, wall to Glass shower door bi-fold hinges. 4. Glass thickness: 6 mm~10 mm 5. Max door weight: 23 kg (with 2 hinges) 6. Feature: 14mm Diameter hole required (non cutout),free swinging 7. Material: SS304 8. Closing angles 180°degree. 9. Straight edges, beveled edges, round edges. 10. Glass preparation- 14mm Diameter hole required. 11. Chrome plated, Brushed Nickel, Gold Plated, Oil Rubbed Bronze.
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.