Wanted : Gaskets Like Metal Ring Joint Spiral Wound Gaskets Suppliers and Manufacturers

- Material : Solid SS304, SS316, SS316L ( also available in some models with hollow tube) - Shape at top of the spigot: Round/dome top or slopped as shown in the picture) - Also available in Square shape - Spigot no hole in the glass panel. - Spigot with base plate and cover ring - Dimensions: 48 x 155mm, 48*220mm, 48*300mm with base plate. - include the black gasket and stainless steel insert - Mirror polished or satin stainless steel.

[Spiral Wound Gasket] Material Filler: GRAPHITE, PTFE, INCONEL, etc. Hoop: SUS304, SUS316L, etc. Feature The spiral wound gasket is the most ideal type having flexibility and recovery which are essential for high temperature and high pressure among semimetal gaskets. It is wound in spiral combined with V-type metal thin hoop and non-ferrous material filler. The winding start part and end part are wound by the hoop over several times and then both edge is processed by spot welding to make the gasket. The gasket has outstanding capability as it features unique structure with elastic metal and flexible filler. - Outstanding capability for high temperature and high pressure - Automatic flexibility and recovery from the change of temperature, pressure, vibration and working conditions - Efficient production for any type of dimensions such as round or oval type, etc. - Outstanding sealing capability as it is produced according to the pressure of unbalanced flange. - Hoop and Filler materials can be selected according to special operating conditions. [METAL GAKSET] - Ring Joint Gasket - Serrated Gasket - Double Jacketed Gasket - Metal O-Ring

SPIRAL WOUND GASKET The spiral wound gasket is suitable for use across a wide pressure range and is therefore virtually applicable. The spiral wound gasket can be used to seal fluid pressures up to 250 bar and cryogenic temperatures as low 200C and up to elevated temperatures 550C. Due to its sturdy design the spiral wound gasket is simple to install without causing damage (although extra care should be taken during transportation and installation of large diameter gasket without guide rings). The outer guide ring serves to locate the spiral element centrally on the flange faces and prevent blow-out. By combining different winding materials and metals the gasket can be tailored to a wide variety of operating conditions. Due to its non-adhesive character the gasket is easy to remove after service. The gasket does not cause damage to the flange faces. BENEFITS OF THE CENTRING RING The spiral wound gasket outer centering ring provides the following benefits: Optimum location between the bolts. Protection of the spiral wound element. Additional security against gasket blow-out. Acts as compression limiter preventing overloading and over compression of the spiral wound element. Prevents radial-flow of soft fillers, such as P.T.F.E. For these reasons it is preferable to use spiral wound gasket with outer centering rings. On the outer ring is marked with nominal size, pressure class, standard and materials. BENEFITS OF THE INNER RING The spiral gasket inner ring provides the following benefits: Prevents radial-flow of soft fillers, such as P.T.F.E. Reduces turbulence-minimizing flow resistance and crevice corrosion. Acts as a heat shield when the spiral wound gasket is subjected to high temperatures. Inner and outer rings are particularly recommended for use on spiral wound gaskets exceeding class 600lbs, but specifically recommended for high temperatures and pressures to optimize the operational reliability of the spiral wound sealing element. MATERIAL SELECTION Material selected for the inner ring and winding metal is usually the same as the flange metal, in order to prevent corrosion and differential expansion problems. The outer centering ring is generally manufactured from carbon steel with an anti- corrosion treatment; however, the ring may also be manufactured in the same metal as the flange to prevent corrosion problems.

Spiral Wound Gasket is formed of V-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. We can produce according to ASME, BS, JIS and EN(DIN) standards or client request. CiXi Feite Sealing Material Co.,Ltd. , it is one of the sealing and gasket munufacturer in China, the company is located in CiXi which is the chinese sealing industrial country. It's specialized in designing, manufacturing and exporting a variety of gaskets and seals products. Gaskets: Spiral Wound Gaskets, Ring Joint Gaskets, Double Jacketed Gaskets, Kammprofile Gaskets, Corrugated Metal Gaskets, Metal Solid Gaskets (Copper,Iron,Aluminum), Non-metal Flat Gaskets,(PTFE,rubber,Non-asbestos,Mica,Cork), Automobile Gaskets, Exhaust Muffler Gaskets, Cylinder Gaskets etc.

Ring joint metallic gasket Metal ring gasket is by smithing, heat treatment and mechanical processing. It is suitable for oil or gas pipe flange, pressure vessel, high speed joint face, valve with high temperature and high pressure. It has good sealing performance even when the pressure and temperature is not stable.The typical style r are divided into ellipse style and octagonal style according to its cross section. The standard style r gasket is made conform to the api 6a & asme b16, 20 standard, can bear 10000psi pressure at most. The octagonal style and ellipse style can be interchanged in flange with trapezum groove. Style rx is an improvement of style r in pressure resistant. It is a standard ring gasket suitable for all the flange sealing which is suitable for style r. Style by is another item with a high pressure resistant up to 15000psi. We have some different material and style which can correspond to different design and operation demand please see the following table for the reference of material characteristic. 56sheets/packing

Fasteners round hex bolt nut studs screws threaded rod gasket washer etc Bolt: M6-M64 (hexagonal, flange)Nut: M3-M64 (hexagonal, flange)Threaded Rod:4-2000mm (all thread, double end thread) Standards: DIN 931, DIN 933, DIN 934, DIN 439, DIN 835, DIN 7991, ISO, JIS, ANSI/ASME, BS, etc Material: stainless duplex stainless nickel alloy monel inconel incoloy hastelloy steel fasteners round hex bolt nut studs screws threaded rod gasket washer Packing : Plywood case or wooden box Exported countries:United States, Germany, Saudi Arabia, South Korea,etc. Stainless Steel: 304 304l 316 316l 321 316ti 347 347h 310s 309s 310 309 fasteners bolt nut studs screw rod washer gasket, Duplex stainless: duplex 2205 2507 s31803 s32750 s32760 s31254 254smo smo254 904l uns no8904 s31050 s32205 s32550 uns no8367 fasteners bolt nut studs screw rod washer gasket, Nickel alloy: nickel 200 201 fasteners bolt nut studs screw rod washer gasket, alloy 255 20 31 6xn fasteners bolt nut studs screw rod washer gasket, monel 400 k500 404 400a 30c fasteners bolt nut studs screw rod washer gasket, inconel 600 601 625 718 783 690 x750 fasteners bolt nut studs screw rod washer gasket, incoloy 800 800h 800ht 825 901 925 6mo 25-6mo fasteners bolt nut studs screw rod washer gasket, hastelloy b b2 b3 c c4 c22 c276 c2000 x g-30 fasteners bolt nut studs screw rod washer gasket, nimonic 80a 90 263 fasteners bolt nut studs screw rod washer gasket duplex s31803 fasteners,duplex s32750 fasteners,duplex 2205 fasteners,duplex 2507 fasteners,904l fasteners, uns no8904 fasteners, 254smo fasteners, s31254 fasteners, monel 400 fasteners, inconel 600 fasteners, inconel 718 fasteners, inconel 625 fasteners, incoloy 800 fasteners, incoloy 800h fasteners, incoloy 800ht fasteners, hastelloy c276 fasteners, incoloy 825 fasteners, monel bolt,inconel bolt,incoloy bolt,hastelloy bolt,nimonic bolt, Monel fasteners,inconel fasteners,incoloy fasteners,hastelloy fasteners,nimonic fasteners,duplex stainless fasteners,duplex bolt,duplex nut,monel nut,inconel nut,incoloy nut,hastelloy nut,nimonic nut,

Metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles.These are manufacturered in accordance with specific tolerances on CNC machines. Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable). Ring Joint Gaskets are as per API- 6A. The units are manufactured in a variety of standard and special materials For price and specification please contact us

SPIRAL WOUND GASKET OFFERS HIGH COMPRESSIBILITY AND RECOVERY Spiral Wound Gasket is composed of a steel outer ring, a spiral wound sealing strip filler and a special steel inner ring. It is created by winding alternating strips of metal and filler material. https://www.forseall.com/ Outer guide ring is fitted to centralise the gasket between the bolts and to act as a compression limiter. Inner ring is fitted to reduce the gap between the inside diameter of the gasket and the bore of the flange. It is widely used in moderate to critical services in various industries. They are most suitable for the gaskets subject to extreme temperature or pressure cycling, shock or vibration. These gaskets have the best resistance property when compare with other metal and asbestos type gaskets. TYPES Centering gasket (Style CG). Utilizes an external ring which accurately centers gasket on flange face. It provide an additional radial strength to prevent the gasket blow-out and acts as a compression stop. A general purpose gasket suitable for both flat face and raised face flanges. Centering gasket with inner ring (Style CGI). This style is similar to style CG, but it additionally consists of an inner ring. The outer ring is used for centering and the internal ring used as an additional compression limiting stop. The internal ring also serves as a barrier to protect the gasket from heat and corrosion. Reinforced spiral wound gasket (Style R). It is a basic configuration of spiral wound gasket. The Inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression and sealing characteristics. Reinforced inner ring spiral wound gasket (Style RIR). This style of the gasket, the solid inner metal ring acts as a compression stop and fills the annular space between flange bore and the inside diameter of the gasket. It is designed to prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion at flange faces. Three centering gaskets with black inner ring on a white background. Style CG spiral wound gasket A centering gasket with inner ring with yellow outer ring on a transparent background. Style CGI spiral wound gasket A reinforce spiral wound gasket on a white background. Style R spiral wound gasket Aspiral wound gasket with a solid metal ring on a gray background. Style RIR spiral wound gasket

Spiral wound gaskets are produced in several style and combination of meterials to fit the most stringent application. Spiral wound gaskets are usually of circular shape, however we can produce them in other shapes such as: oval, rectangular, with round corners, etc. Our standard production program comprises a range of spiral wound gaskets with inner diameters of 10mm to 3000mm and non-standard dimensions and shapes, and larger diameters are available on request. Metallic strip: Ptfe Standard: asme b16.20

Spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Other items in : gasket spiral wound gasket » inner and outer ring of swg On request

Description:zt-600 spiral-wound gasket is formed of v-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Application: We can produce according to asme, bs, jis and en(din) standards or client request. ProductsStyleFlangeFor example Basic type swgZt-600Tongue and groove304/ptfe Swg with inner ringZt-600 irMale and female304 304/fg Swg with outer ringZt-600 crRaised face Flat face304/asb cs Swg with inner & outer ringsZt-600 ic304 304/fg cs Swg for heat exchangerZt-600 hHeat exchanger304/fg with 1 bar of dj Special shape swgZt-600 sSpecialOval Material: StyleStructureHoop materialFiller materialInner & outer ring materialNormal thickness mm GasketInner & outer ring Zt-600Without rings304(l);316(l) 321;317l 31803 Monel, Ti, ni Inc Hast.C/b Zr702 Etc. Graphite, ptfe, Asbestos Non-asb Mica, EtcCs, 304(l), 316(l), 321;317l 31803 Ti, ni Inc Hast. Monel, Zr7023.2 4.5 (0.175¡±) 6.42 3 (1/8¡±) 4 Zt-600 irWith inner ring Zt-600 crWith outer ring Zt-600 icWith inner & outer rings Color cord as asme b16.20 on request. Wooden box

Spiral wound gasket manufactured by wealson is widely uesd for sealing flange joints, manhole and handhole covers, tube covers, boilers, heat exchangers, pressure vessels, pumps, compressors and valves, in industries such as petrochemical, pharmaceutical, shipbuilding, and food processing, in power industries and nuclear power stations. They are ideal for steam, oil, liquids, gases, acids, alkalines, various organic mediums and solvents. It can be manufactured with any material as per customers requirement in accordance with the standard ASME, DIN, BS, api or to customer's specification.

With good compressio elasticity, it is applicable to the sealing parts under the intense alternating temperature and pressure, as the static sealing elements at the flange joints of pipelines, valves, pumps, heat exchangers, towers, manholes, handholes, etc. Ití»s widely used in petrochemical, machinery, electric power, metallurgy, shipbuilding, medicine, atomic energy, aerospace and other fields.

Products Style Flange For example Basic type SWG ABT-601 Tongue and Groove 304/PTFE SWG with inner ring ABT-601 IR Male and Female 304 304/FG SWG with outer ring ABT-601 CR Raised face Flat face 304/ASB CS SWG with inner & outer rings ABT-601 IC 304 304/FG CS SWG for heat exchanger ABT-601 H Heat exchanger 304/FG with 1 bar of DJ Special shape SWG ABT-601 S Special Oval

High quality spiral wound gasket with medium price. Asme16.20, hg20610, hg20631.

Specification: Description:WFY SW3100 Spiral-Wound gasket is formed of V-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Application: We can produce according to ASME, BS, JIS and EN(DIN) standards or client request.

Spiral wound gasket Got-400 spiral wound gasket is accumulated, hovered and wound, and spot welded beginning and end terminal by v-shaped or w-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with temperature and pressure altering violently. It is a static sealing parts used for such flange connecting joints as pipeline, valve, bump, heat exchanger, tower, manhole, and hand hole, etc. It is widely applied in departments as petrochemical, mechanical, electric power, metallurgy, boat building, medical, atomic energy, and aerospace

Spiral wound gasket Got-400 spiral wound gasket is accumulated, hovered and wound, and spot welded beginning and end terminal by v-shaped or w-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with temperature and pressure altering violently. It is a static sealing parts used for such flange connecting joints as pipeline, valve, bump, heat exchanger, tower, manhole, and hand hole, etc. It is widely applied in departments as petrochemical, mechanical, electric power, metallurgy, boat building, medical, atomic energy, and aerospace, etc. Ansi b 16.20mss sp-44api 605dinjisjpibs 1560jg/tgb/thgsh, etc.

Material: Spairal wound gasket is formed of V-shaped of W-shape stainless steel stripe and soft nonmetallic packing or the material of flexible graphite asbestos, nonasbestos, PTFE etc by means of piled. The(inner/outer) ring: Carbo steel, SS304, SS316, Monel Use temperature: -200-870ípC Use pressure: 30Mpa Application range: The static sealing element of pipe, valve, pump, thermal exchange, condensing motorcycle, auto vent-pipe, tower, plain hole and hole of flange, etc. Supplying specification: DN10-300-0mm