Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
We can supply you with HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Specification and Quotation Chemical Composition: C: 0.06 - 0.082% Mn: 0.75 - 1.05% SI: 0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% - HMS1 and HMS2 are normally sold together with a ratio of 80/20 (or similar) depending on the price and weight; - Cutting: 1 - 5 meters; 6 - 12 meters (or other cuts).
Used metal scrap hms 1&2, used rails Used Rail Scrap Offer Description - Used metal scrap hms 1&2, used rails Used Rail Scrap USED RAILWAY STEEL SCRAP Price of product ( USD price or FOB price) : USD 170 per MT Key Specifications/Special Features : 1ST- Product: R50-R65 Used rail steel scrap 2ND- Specification: ISRI 200â?? 202,1- R50-R60 AND R65 with (ISRI) standard classification,- R50-R60 ( 51.67 KG/running meter),- R63-R65 ( 64.72 KG/running meter), Lengths from 6 MS TO1.25 MS, C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% * NORMS : R-50GOST-7173-75 AND R-65 GOST-8165-75,R50 (51.67 KG/M)-GOST-7173-75R65 (64.72 KG/M)-GOST-8165-75,Cutting:1 - 1.5 - 6 - 12 meters (or other cuts) Cutting: 1 - 1.5 - 6 - 12 meters (other cuts).
Dear Mr. We Bluepark Tradelink Inc, Authority official mandate from a big group company in the Russia. We can supply the Russia origin of products as below; 1. Used rail R 50~65 and HMS 1/2 (80/20%) /MOQ : 30,000/MT x 12 months 2. All kind refined OIL and GAS products as below; -D2 GAS OIL, DIESEL HSD2 GAS OIL (Automotive GAS OIL), LPG (Liquefied Petroleum GAS), LNG ((Liquefied Natural GAS, Gasoline 93/95 Octanes, CST- 180 Fuel Oil, Petroleum Coke, Aviation Kerosene Colonial Grade 54 Jet Fuel, Jet Fuel JPA1 (Aviation Kerosene Colonial Grade A1 , D6 Virgin Fuel, EN590 10PPM (Ultra Low Sulfur Diesel),Heating oil, Bitumen, Solvents.... -Payment: By irrevocable, Non- transferable, Documentary L/C at sight. -No upfront pay: any fees or any charge by seller bears all cost. -P/bond :seller's bank issues PBG 2% to buyer's bank. Only,we working for annual orders to serious buyers and their mandate,but we don't work to long chain fake agent or fake broker. If you interested, direct send us via our e-mail address for your orders of full details.
Chemical Specification/ Composition : Carbon - 0.2% to 0.60% Manganese - 0.80 to 0.90% Silicon - 0.15 to 0.35% Sulphur - 0.05% Max. Phosphorus - 0.06% Max. 1. Origin : Romania 2. Destination: ASWP 3. Delivery Schedule: Seller to specify for completion of total quantity and first shipment from date of confirmed L/C in sellers account; 4. Payment Terms: CIA (Confirmed, Irrevocable, At Sight), transferable and revolving L/C payable in US dollars. 100% at sight of shipment against receipt of all documents required within 5 days of the contract signing from a top 25 world bank. 5. PBG Guarantee: 2% operative PBG to be issued by the seller. The seller will not agree to any additional penalty. 6. Inspection : SGS by seller. 7. Quantity : 30,000 MT x 6 8. Packing : Container Price : USD 297 per MT (CNF) 9. Packing : Break Bulk Price : USD 267 per MT (CNF) Procedure : 1. Prospective buyer gives LOI and BCL. 2. Seller verifies LOI and BCL thru soft probe, then only forwards the draft contract. 3. Seller and Buyer negotiate and finalize the draft contract. 4. Seller releases final contract for signing by both parties. 5. Buyer opens CIA (Confirmed, Irrevocable, At Sight), transferable and revolving, non v operative L/C payable in US dollars. 6. Seller issues Performa Bond guarantee for 2% of the value of the L/C. 7. Seller provides POP (Proof of product given bank to bank) 8. Buyer's L/C becomes operative 9. Shipment commences Break bulk & containers
Hello, Greeting from Walter Cuminns Shipping Services!! Hope you are doing well. We can supply Used Rails & Hms 1 & 2 @230/- CIF. (ASWP) Kindly contact us : snp at waltercuminns dot com or wats app +917025693820. Payment Terms : !100% SBLC/DLC/ Irrevocable Transfer LC , payment at Loading Port. Regards. Reegesh
Product Name : Metal Scrap Specifications : Used Rail and HMS 1&2 Steel Scrap, Iron Scrap HMS 1&2- MT Used Rail-
We can offer to competitive prices,rationality procedures and basic conditions for used rail ans HMS 1/2. -Goods: Used rail R 50~65 and HMS 1/2 (80/20%) -MOQ : 30,000 x 12 months (no spot & trial order) -Origin: Russia -Payment: By irrevocable, Non- transferable, Documentary L/C payable and within five (5) days after inspection at the discharge port. -No upfront pay: any fees or any charge by seller bears all cost. -P/bond :seller's bank issues PBG 2% to buyer's bank. We only want serious buyers and their mandate and we don't work to long chain agent or broker. If you interested, direct send us via our e-mail address for your orders of full details. I waiting your good answer.
Seller guarantees to the Buyer that the Goods delivered under the present Contract shall correspond to the characteristics shown below: ISRI USA GOST 2787-75 Russia HMS 1&2 (80/20) IRSI 200-206Steel scrap Defined as HMS 1 & 2 in an 80/20 mix under IRSI c odes 200 through 206. No n- metal impurities total 1 % (one percent) or less - no radiation, arms, ammunition, bombs, shells, mines, cartridges, Sealed gas carbon steel is not included in this scrap -we sell that as a separate item.
We stay competitive in the SCRAP METALS Industry with International Market. Our collection of reports provides comprehensive insight into product trends and new market segments, creating a broad industry overview. Firstly note that this is a public limited liability company with five branches of companies in Europe with yards and factory of production in which any of the companies can make your delivery every month based on the quantity requested from the management, inspections of yards is also allowed this is a routine that is encourage by the management of the company-after all observations of the company's policy and government restriction, and protocols has been accepted by buyers of your company. Inspections by SGS or CCIC Certificate will be issued. The payment terms is found in the company Soft Offer and all the terms and condition will be seen in the Full Corporate Offer of the company, while the entire price is in dollars CIF per MT. Note that we are direct seller and dealers of Refined Edible Sunflower Oil and Scrap Metals e.g. Refined Soybean Oil, Refined Sunflower Oil, Refined Corn Oil, Extra Virgin Olive Oil, Rapeseed Oil, HMS 1&2, Used Rails, Sts Scrap, Dry Drained Lead Batteries, Aluminum, Copper Cathodes, Tungsten Carbide, Titanium, Stainless steel, Cast Iron, Copper Ore, Nickel, and Copper Wires etc…Our natural supplying firm is in Spain. We are located in several parts of the world; the parent company is based in Spain. The company trade in atmosphere that is transparent and flexible, finding individual solution to particular situation. We have the resources to supply your market need, and our objective to utilize every means to find solutions to your market needs. We are open to third party brokerage and sell directly from our principal production plant in Spain. We take absolute responsibilities of all sourcing, processing transportation, insurance and taxation involved in the transaction and guaranteed time supply. Meanwhile, the management will need your utmost cooperation with our terms and condition of Services towards the success of the delivery order. The management will appreciate both companies to be very constructive in approaching issues and not to waste our individual time and resources; please confirm your company capability or buyer‘s capability and readiness to trade in our trading terms; and properly evaluate our price listed in the SOFT OFFER which will be send to you if requested before sending LOI, ICPO to our company. We will offer you qualitative service, and the management is open and welcomes new initiatives. The companies are dedicated to finding solution to your market need. BULK CARGO, CONTAINERIZED
Specification of Used Rail R50/R65: Used Rail - GOST R-50-R65 R50 (51.72 Kg / Meter) GOST 7173-55 R65 (64.72 Kg/Meter) COST 8161-75 Chemical Composition of the steel scrap is of international standard as follow: MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max. MOQ contact: Used rails R50-r65 15,000mt x 12 months MOQ contact: HMS1/2 15,000mt x 12 months
Used ferrous and non-ferrous metal. Bulk
We have good quality hms 1 & 2 ,location Columbia,more then 3 lac.tn.,
Used rails scrape 1. Length: The standard size is 6 - 12 meters. If you need them cut there is a $5.00 per MT cutting charge. 2. Quantity: In case of 30,000MT/month x 12 months, or one spot deal 3.Location of scrap yard Australia or Romania 4. Payment term: Irrevocable, Fully Assured, Auto Revolving, Divisible, Assignable, DLC OR a BG/SBLC for 3 months value 5. Delivery period: 15 days after formal contract is signed Bulk
HMS 2 Scrap :HMS 1 HMS 2 METAL SCRAP / USED RAILS / CAST IRON FOR SALE ! Used Rails R50 - R65, At Best Price/Used Rail Scrap for sale /Used Railway Track in Bulk Used Rail Steel Scrap HMS 1 and HMS 2 Scrap Heavy Melting Scrap Product Name rail steel Specifications 38Kg/m 43Kg/m 50Kg/m 60Kg/m Length 12M, or customized as required Standard ASTM, JIS, DIN, GB, Steel Grade ASTM A2008 JIS 1103-91 DIN 536 GB/T 2585 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. MOQ 1 Ton Delivery Condition Forged +Rough Machined (Black Surface) Application scenario Train tracks, cranes, construction Processing Service Welding, Drilling, Cutting, Bending Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T Quality Excellent
C 0.54 -0.82 Si 0.18 - 0.40 Mn 0.60 - 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75 In ferrous we mainly deal in HMS1 & 2 Material Specification Heavy Melting Scrap (HMS 1& 2) ,80% HMS 1 & 20 % HMS 2 confirming to ISRI 200-206 HMS 1 ISRI Code 200: heavy melting steel. Wrought iron and/or Steel scrap inch or steel scrap inch and over in thickness. Individual pieces not over 60 x 24 inches HMS 1 ISRI Code 201: heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap HMS 1 ISRI Code 202: heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap HMS 2 ISRI Code 203: heavy melting steel. Wrought iron or Steel scrap, Black and Galvanized. 1/8 inch and over in thickness, charging box size to include material not suitable as no.1 heavy melting steel. HMS 2 ISRI Code 204: same as ISRI 203 but max size 36-18 inches. HMS 2 ISRI Code 205: same as ISRI 204 but free of sheet iron or thin-gauged material. HMS 2 ISRI Code 206: same as ISRI 204, but max size 60 x 18 inches
Products: Used Rails R50-R65 and HMS 1/2 Quantity: Large Origin: South Africa (Durban Port) Price: $275 MT/CIF (ASWP) Payment Terms: SBLC mt760 guarantee with 2% PB