Two Piece Ball Valve Suppliers and Manufacturers

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

MATERIAL - CAST IRON / CAST STEEL / WCB / STAINLESS STEEL 3O4/316/316L BALL - STAINLESS STEEL 304 / 316 STEAM - STAINLESS STEEL 304/316/ GLAND NUT - STAINLESS STEEL 304/316 LEVER - STAINLESS STEEL 304 SEAT - PTFE / CTFE / GTFE STUD NUT - STAINLEES STEEL 304

Pipe thread in accordance: npt, bspt, bsp, iso-228 class a thread Temperature range: Ptfe: -20~180 Tfm: -50~270 Rptfe: -35~210 Suitable medium: water, oil, air and some corrosive liquid(w.O.G) Nominal pressure: 1000psi(pn63) for 1/2" to 3" Stem: blow-out proof Locking device Material: cf8m(din 1.4408), cf8(din 1.4308), wcb(din 1.0619).

Manually two piece al bronze ball valve main parameter Size : 15mm-200mm Pressure: 150lb-300lb Temperature : 150 degree celsius Medium : oxygen, fresh water, seawater, oil , steam, etc. Operation : handle , gear , electric. Body and bonnet material : bronze , al bronze Stem : bronze , stainless steel Seal : ptfe , pfa Connection : flange end Standard : ansi , din , jis Plywood case

Overview of electric three-piece ball valve: The electric three-piece ball valve (electric internal thread ball valve) is assembled from three parts: the left and right valve casings and the middle valve body. Four longer bolts traverse the three-section valve casing, and tightly clamp the middle valve body from both ends. The biggest advantage of the electric three-piece ball valve is that it is particularly easy to disassemble. When the valve fails or needs to be repaired, it is not necessary to disassemble the thread of the pipeline, but the four-piece ball valve can be taken off directly, and the body part can be taken out. It not only reduces the probability of failure, but also improves the working efficiency. It is especially suitable for working conditions with small mechanical volume and narrow space. Electric three-piece ball valve principle: The three-piece electric ball valve has reliable sealing performance and high pressure. Its action principle is to drive the valve core to rotate 90 degrees through the power supply voltage of the electric actuator to open and cut off the medium. It can be designed as The two-position switch control of the medium can also realize the proportional adjustment of the medium flow, pressure, temperature and other parameters in the pipeline. Electric three-piece ball valve standard specification: Test inspection: API598, EN12266 Threaded end: ASME B1.20, BS21 DIN2999/259, BSP ISO7/1, ISO228/1 JIS B 0203 Butt weld ends: ASME B16025 Sleeve Welding Ends: ASME B16.11 Flange connection: ASME B16.5 DIN2542~2545 JIS B2238 Classification and difference of electric chip ball valve: The movable one-piece ball valve is one-piece, and the ball is fixed by a plug, which facilitates its maintenance and can be used in working conditions that require quick opening and quick closing. The electric two-piece ball valve is composed of two parts, which are fixed by two pieces of valve bodies clamping the ball. The maintenance is relatively complicated. The tightness of the middle screw is related to whether there will be air leakage, The electric three-piece ball valve is similar to the two-piece ball valve. It consists of left and right end covers and a middle valve body, and then enters the sheep clamp with necks on both sides. Its pressure is higher than that of the other two types.

China floating ball valve: forged steel, alloy steel floating ball valves, two-piece full & reduced bore, 24 inch, class 150, blow-out proof stem. Features: Side entry / top entry. Two-pieces design. Full & reduced bore. Anti-stactic device. Blow-out proof stem. Fire safe design. Specifications: Design: asme b16.34/bs 5351/api 6d. Face to face: asme b16.10. End to end: asme b16.10. End flange: asme b16.5. Bw end: asme b16.25. Test: api 598. Special: nace mr-01-75. Pressure: class 150lb. Size range: 24 inch. Material available: a105, lf2, f9, f11, f22, f304, f304l, f316, f316l, f321, f51, alloy steel.