Find Verified Trident 2400 Psi Burst Disc Assembly Suppliers, Manufacturers and Wholesalers

Product Description

Prevents over pressurization of scuba cylinders.

Type: Hydraulic Hose Assembly

Material (Hose): Synthetic Rubber with Steel Wire Reinforcement

Hose Construction: 2-wire/4-wire braid (based on pressure rating)

End Fittings: Crimped Steel Fittings - Straight & 90�° Elbows

Hose Sizes (ID): �¼ to 1 (based on image estimate - can be confirmed with caliper)

Working Pressure: Typically ranges from 2500 PSI to 6000 PSI

Temperature Range: -40�°C to +100�°C (depending on fluid & hose compound)

Standards: SAE 100 R1AT / R2AT / R12 / EN 853/856 (based on rating)

Applications: Hydraulic machinery, industrial equipment, heavy-duty vehicles

Protective Finish: Zinc-plated / plated steel fittings

Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available

Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

ASTM D2564 STANDARD:

RPC-WELD PVC solvent cements have passed the following tests performed according to ASTM Standard D2564

Test Pressure
2 hour Hydrostatic Burst Test 400 psi
2 Hour Lap Shear Test 250 psi
16 Hour Lap Shear Test 500 psi
72 Hour Lap Shear Test 900 psi

DIRECTIONS:
Keep container close when not in use
Set time is the time required before joint can safely be handled.
Cure time is the time required before joint can be pressure tested

1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go to way into fitting. If pipe bottoms into fitting
it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and
fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation.
Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least the size of the pipe diameter
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting.
Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts.
Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low
and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 60 F.
Longer cure time may be required for larger pipe and /or if temperature is below 60 F.
Do not test with compressed air.

CURE TIME GUIDE: Consult ASTM schedule

Raw Materials from U.S.A

Available in Rs: Rs.5/- Pack
Jeera Papad Manufacturers and Suppliers in Delhi India
Welcome to Priniti Foods, your ultimate destination for delicious and crispy Jeera Papad. We take pride in being one of the leading Jeera Papad Manufacturers and Jeera Papad Suppliers in India. Our commitment to quality and taste has made us a favorite among households and restaurants alike. Let's dive into what makes our Jeera Papad special and why you should choose Priniti Foods.

What is Jeera Papad?
Jeera Papad is a traditional Indian snack made from urad dal (black gram flour) and flavored with cumin seeds (jeera). It is a crunchy and savory treat that complements any meal. Whether you enjoy it as a side dish, a snack, or an appetizer, Jeera Papad adds a burst of flavor to your dining experience.


Quality Ingredients
At Priniti Foods, we believe that the best products come from the best ingredients. Our Jeera Papad is made from high-quality urad dal and the finest cumin seeds. We source our ingredients from trusted farmers and suppliers to ensure that every papad we make is of the highest standard.

Traditional Recipe
Our Jeera Papad is crafted using a traditional recipe that has been passed down through generations. This recipe ensures that each papad is perfectly balanced in flavor and texture. The process involves grinding the urad dal into a fine flour, mixing it with cumin seeds and other spices, and then rolling it into thin discs. These discs are sun-dried to perfection, preserving the authentic taste and crunchiness.

Hygienic Manufacturing
As one of the top Jeera Papad Manufacturers in Delhi, we adhere to strict hygiene and safety standards in our production process. Our state-of-the-art facility is equipped with modern machinery that ensures the papads are made in a clean and controlled environment. We take every measure to maintain the freshness and quality of our products.

Packaging
Packaging plays a crucial role in preserving the taste and freshness of our Jeera Papad. We use high-quality packaging materials that keep the papads crispy and free from moisture. Our packaging is also designed to be convenient and easy to use, ensuring that you can enjoy our papads anytime, anywhere.

Health Benefits
Jeera Papad is not only tasty but also has several health benefits. It is low in calories and fat, making it a guilt-free snack option. The cumin seeds in the papad aid in digestion and have antioxidant properties. Additionally, urad dal is a good source of protein and dietary fiber, contributing to a healthy diet.

Versatile Snack
One of the best things about Jeera Papad is its versatility. You can enjoy it in many ways:

1. As a Side Dish: Serve it alongside your meals to add a crunchy element.
2. As a Snack: Enjoy it with chutney, salsa, or yogurt dip for a quick and tasty snack.
3. In Recipes: Crush it and use it as a topping for chaats and salads to add a unique flavor and texture

Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35SH,N45SH,N30UH,N38EH
Tolerance in size : +/-0.1 mm

Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N38,45H,N40SH,N42SH,N33UH,N33EH
Tolerance in size : +/-0.1 mm

Product name : Custom Super Strong permanent N54 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : 45M,38H,N40SH,N33UH,N35EH
Tolerance in size : +/-0.1 mm

Product name : pot magnet Custom Super Strong permanent N50 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N38,N40,N42,N45,N48,N50,N52
Tolerance in size : +/-0.1 mm

Product name : Custom Super Strong permanent 48H Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N38SH,N42SH,N35UH,N38EH
Tolerance in size : +/-0.1 mm

Product name : Disc magnet, Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N52,48M,N45SH,N35UH,N38EH
Tolerance in size : +/-0.1 mm

Product name : Disc magnet,Custom Super Strong permanent N35 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N45,N50,N40M,N48M
Tolerance in size : +/-0.1 mm

Product name : Disc magnet,Custom Super Strong permanent N38 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N38,N40M,45H,N42SH,N45SH,N35UH,N35EH
Tolerance in size : +/-0.1 mm

Product name : Custom Super Strong permanent N35 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N38,N40,N42,N45,N48,N50,N52
Tolerance in size : +/-0.1 mm

Product name : Ring magnet,Custom Super Strong permanent 40H Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N38M,N40H,N35SH,N30UH
Tolerance in size : +/-0.1 mm

Product name : rare earth magnet,Custom Super Strong permanent N38 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N42,N50,N42M,N48M,N40H,N45H,N35SH,N45SH,N30UH,N38EH
Tolerance in size : +/-0.1 mm

Product name : Custom Super Strong permanent N48 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N40,N48,N40M,N42M,N38H,N35SH,N42SH,N33UH,N35EH
Tolerance in size : +/-0.1 mm

Product name : Custom Super Strong permanent 35H Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N38,N42,N42M,N48M,N42H,N45H,N35SH,N40SH,N33UH,N38EH
Tolerance in size : +/-0.1 mm

Product name : block magnet,Custom Super Strong permanent N45 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N45,N48,N50,N52,N42M,N48M,N35H,N40H,N35SH,N45SH,N30UH,N38EH
Tolerance in size : +/-0.1 mm