Top Entry Ball Valve Suppliers and Manufacturers

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

1500LB high pressure top entry ball valve has a top entry structure which has advantages as below of small fluid resistance, simple structure, small volume, light weight, convenience for operation and maintenance, open and close quickly as well as start and close flexibly & reliable sealing. This type valve has the below features: 1: Top entry structure Its most difference from common ball valve is that its maintenance can be made on pipe line and without dismounting from the pipe line.The back space seat structure is adopted for the seat and the rear portion of seat retainer is oblique angle to prevent accumulation of impurity from affecting back space of seat. 2:One piece body One piece body is to guarantee sufficient strength and rigidity under maximum rated operating pressure. The internal parts of valve are carefully designed and selected to ensure reliability under all kinds of operating condition. Enough margin wall thckness and adaptation of high strength connective bolts are convenient for valve maitenance and sufficiency to support the stress from piping. 3: Emergency sealing Compound injection holes are designed and compound injection valves are installed at locations of stem cap and body support of side valve.When sealing of stem or seat is damaged to induce leakage, the compound can be used to do the second time sealing. A concealed check valve is installed in side of each compound injection valve to prevent compound from out flowing due to the action of transmitter substance.The top of the compound injection valve is the connector for fast connection with compound injection gun. 4: Low operation torque Top entry ball valve has a trunnion mounted ball, whose surface is ground, polished and hard face treated.The ball and stem is integrated, sliding bearing is installed on the external bore so that the friction radius is small and operation torque is very low. 5: Double block & bleed(DBB) design When ball is full open or close position,the transmitter substance in center cavity of body can be released by drainage and emptying devices.In addition,the over loaded pressure in the center cavity of valve can be released to low pressure end by self relief seat. 6: Reliable sealing design The seat sealing is formed by seat sealing and metal retainer component.The seat retainer floats axially and low pressure sealing of valve seat is reached by pre-pressure of spring.In addition, the piston effect of valve seat is designed reasonably,which realized high pressure sealing by the pressure of operating medium and realize the interception of retainer to form the sealing of the body.The expansion graphite ring is designed to realize sealing under fire condition. 7: Extension stem design For the underground installed top entry ball valve, the stem can be lengthened and for the convenience of operation the corresponding compound injection nozzle and drainage valve can be extended to the top of valve. 8: Anti-static and fire safe design The fire prevention design of valve meets the requirement in API6FA/API607 standard and the design of the anti-static conforms to regulations in API6D and BS5351. Plywood case.

Integral body design, flange or butt welded preferable Double Block and Bleed High strength integral stem design, precisely guaranteed ball location Anti-blow-out stem design 2 sets of Oring seal plus fire safe design on stem, greatly avoided leakage Anti corrosion, low friction coefficient bearing Bi-direction seal High performance Nylon and PEEK seat, grantees sealing under low pressure Sealant injection can guarantee the seal of the stem and seat under emergency Adopt unique adjusting seat ring design(seat ring is able to move forward & backward), enables to change stem, ball, seat ring, and seal on-line. Low torque, easy operation Anti static design Equipped with mounting plate, convenient in mounting actuator anytime Fire safe, when seat is destroyed in fire, the metal seat ring will contact the ball to provide sealing

Top Entry Ball Valve

Forged Steel Top Entry Ball Valve Design Specifications: Size: from NPS 1/2 to NPS 4 Inch. Class: from ASME 150 to ASME 2500LB. Design: API 6D, API 608, ASME B16.34, DIN 3357. Wall Thickness: ASME B16.34. Pressure-temperature Rating: ASME B16.34. Face-to-face Dimensions for Flanged Valves: ASME B16.10-API 6D. Flange Design: ASME B16.5. Socket Weld Ends to ASME B16.11. Screwed Ends (NPT) to ASME B1.20.1- ASME B16.11. Butt Welding Ends: ASME B16.25 Pressure Testing: API 598 Body Material: A105, A182 F304, A182 F304L, A182 F316, A182 F316L, A352 LF2, A352 F11, A352 F22, A352 F5, A352 F51, A352 F321. Quality Assurance (QA): Every step from procurement through production, welding, assembly, testing, and packaging is in accordance with quality programs and procedures (ASME Section III manual and ISO 9001 manual).

Top Entry Ball Valve Manufacturer: Forged steel top entry ball valves, available in NPS sizes 1/2 to 4 inches, with pressure ratings from ASME 150 to 2500 LB, compliant with API 6D, API 608, ASME B16.34, DIN 3357, and API 598 standards.

*ball valve O floating ball valve O trunnion mounted ball valve O top entry ball valve O full welding ball valve O orbit ball valve *ball valve O floating ball valve O trunnion mounted ball valve O top entry ball valve O full welding ball valve O orbit ball valve

Ball valves, TFC China. Sea worthy plywood cases.

Ball valves, TFC china. Sea worthy plywood cases.

Fully welded ball valves, TFC China. Sea worthy plywood cases.

Top Entry Forged Steel Ball Valve Design Specifications: Body Material: ASTM A352 F321. Size: from NPS 1/2 to NPS 4 Inch. Class: from ASME 150 to ASME 2500LB. Design: API 6D, API 608, ASME B16.34, DIN 3357. Wall Thickness: ASME B16.34. Pressure-temperature Rating: ASME B16.34. Face-to-face Dimensions for Flanged Valves: ASME B16.10-API 6D. Flange Design: ASME B16.5. Socket Weld Ends to ASME B16.11. Screwed Ends (NPT) to ASME B1.20.1- ASME B16.11. Butt Welding Ends: ASME B16.25 Pressure Testing: API 598 More Body Materials: A105, A182 F304, A182 F304L, A182 F316, A182 F316L, A352 LF2, A352 F11, A352 F22, A352 F5, A352 F51, A352 F321. Quality Assurance (QA): Every step from procurement through production, welding, assembly, testing, and packaging is in accordance with quality programs and procedures (ASME Section III manual and ISO 9001 manual). Manufacturer: China Topper Forged Valve Manufacturer Co., Ltd. Sales Contact: Jeasin Lee Sales email: valvesforged@uvalves.com