Find Verified Teflon Ptfe Rod Suppliers, Manufacturers and Wholesalers

Description The chemical, electrical and thermal performance of ptfe is second to none among any other available plastics. So it is known as ¡¡ãthe king of plastic¡¡à. It is among the most widely used of all the fluoropolymers. Characteristics -non-stuck Applications Bearings Gaskets Sealing rings Wear rings Friction pads Insulators Chemical resistance linings Medical apparatus such as hoppers, beakers By plastic pallet or wooden pallet

Ptfe extruded rod: Description: 1.Ptfe rod could work in temperature of -180~260 2. Good dielectric in mediums. 3. It has not-sticky property. 4. Nice insulation property 2. Self-lubrication Specification of ptfe rod: (oem is available) Diameter(mm)Length(mm)Tolerance 51000-3000mm Properties: ItemData Apparent density2.10-2.30 g/ cm3 Tensile strengthy14 mpa Elongation at breaky140% Working temp-180~260 Melting point330 Produce max.Temp390 Compressive strength 1% deformation400-500% Hardness50-60 shored Water absorption0.01% Application: 1 chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc. 2. Machine: used in piston ring, guide ring, machine tool guideways etc. 3. Electrical and electronic engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc. 4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper. 5. Light textile and other industry: ptfe product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc. Wooden case

PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE(teflon) rod and molded PTFE(teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE rod has similar friction levels to ice. The material of PTFE can work at -180 C ~+260 C and is the best electrical insulator of all known plastics. Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on. Remarks: We can also produce PTFE(Teflon) sheet in other sizes and thickness according to customers' specific requirements.

Ptfe teflon rods Ptfe teflon rods are available from 6mm dia to 500mm dia in pure teflon and various filled grades

Ptfe rod extruder dia 80mm-150mm 1.Horizontal ram extruder for ptfe rod 2.Ram extruding machine for ptfe rod 3.Using for pre-sintering ptfe material. 4.Suit for new ptfe material or recycle ptfe material. Teflon extruding machine for ptfe rod(80-150mm) This ptfe extruder is able to extrude rod which dia from 80mm to 150mm. The automatic Production line is controlled by computer, which is really easy to operate. Meanwhile, the Plastic extrusion machine is advance designed, high output, low energy consumption, Long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Technical data Description model no. Machine model pfb-150 Plastic extruderptfe rod Power33 kw Min - max dia80-150 mm Tolerance1-2mm Lengthunlimited Production per hour8-16 kg Electricity consumption per hour2.5 kw Weight of the machine1220 kg High of the machine1680mm Floor area of the machine1.6 m2 Warrenty for parts1 year Machine gurantee period1 year Free spares1 set

Specifications of single screw plastic ptfe teflon extruded rod 1. Use virgin ptfe resin to make 2. The size is: A)od: 3mm~25mm, max length 4200mm. B)od: 25mm~150mm, max length 4200. C)od 150~500mm, 1000mm. 3. Tolerance: -0.1~+0.1mm 4. Color: natural white, red, yellow, black. 5. Surfact: smooth, no impurities, no black spot. 6. Perfect package: inside is plastic paper, outside is fumigation wooden box. 7. Delivery time is usually 10days, as can according to the fact quantity to deliver. Characteristics of single screw plastic ptfe teflon extruded rod One key important advantage of ptfe rod is its operating temperature range, it can Easily out perform other engineering plastics by being able to perform continuously At -250°c, right up to an amazing 250°c. Another important advantage of ptfe rod Is its outstanding co-efficient of friction, ptfe is in the record books as having one of The lowest friction values known to man. Ptfe also has excellent acid and chemical Resistance. Another feature of ptfe is its ability to set by or due to compression. Ptfe has excellent electrical resistance. Ptfe is also water repellent and is often used In the manufacture of modern high performing, water repellent and breathable clothing.

Specifications PTFE Rod Ram Extruder PTFE Tube Ram Extruder PTFE Mould Press Machine PTFE Flim Skiving Machine PTFE Paste Extruder For Hoses wooden box

Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.

We at BDMG, provide PTFE Teflon Tapes for electric insulation purpose or for release film. PTFE Tapes are available in any required width 6 mm to 150 mm and in any required thickness 0.003 to 0.025 inch as per the customer needs.

Copper cathode , copper millberry scrap, copper scrap, copper ingot, copper wire rod.Exporter

300mm long rods as per standards.

Teflon rods.

PTFE Teflon Push plunger press machine For PTFE Tube(Φ20-150mm) PTFE ram extruder line is able to extrude ptfe/Teflon tube which dia from 20mm to 150mm. The automatic production line is computerize controll, which is really easy to operate.Meanwhile, the plastic Teflon extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. The extrusion machine had has continue improved in past 12 years with high quality and stable operation. Ram extrusion machine for Teflon PTFE Tube The China vertical PTFE RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China tube ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the  mandrel. Base plate and dosing tray are water-cooled.The PTFE Molded powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 20 to 150 mm, Heating zones 5 zones The complete electrical control is laterally fastened at tube ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automaticcontrollers for speeds and temperatures. 4-6 temperature regulators are contained in the plant,four for the extruding ptfe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE tube diameters and PTFE product heating length. PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Tube Extruder Dia 20mm-150mm Technical Data Description Model No.  Machine model PFG-150 Plastic Extruder PTFE Tube Power 15 kw Min - Max OD 25mm-150 mm  Tolerance THK 0.1-0.2 mm  Length Unlimited Production Per Hour 7 kg Electricity Consumption Per hour 1.2 kw Weight of the Machine 1320 kg High of the Machine 2580 mm Floor area of the Machine 3.5 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set  Deliver LT 30 Days -