- It removes dirts n stains out of shoes n wheels at the entrance or important production area - High adhesion, ability to stick several types of dirt with a good friction, not slippery - Widely used in electronic, semiconduct, medical and cleaning industries, operation room...
Sticky mat Ally sticky mats made from high quality ldpe (low density polyethylene) film And specially formulated acrylic type adhesive, boast to achieve highest adhesion With lowest peel off strength as a user friendly sticky mat product; your customer Do not need to struggle with the sticky mat every time they need to peel off the Used sheet. Therer is no adhesive transfer. 1) film thickness: 0.05mm pe polyethylene film 2) adhesive thickness: around 0.008mm 3) 30 or 60 layers/mat, 10 mats/case 4) sizes: 18" x 36", 18" x 45", 24" x 36", 26" x 45" 5) colors: white, blue
Sticky mat is mainly placed at the entrance of rooms that need to be dust-proof, or buffer areas . It is also applicable to the production lines of micro-electronic, semiconductor, lcd and pcb industries and so on. It can effectively stick and remove dust from soles , wheels and products to minimize the effect of dust on quality of clean environment. In this way, dust removal is easily achieved, unlike other mats that can not remove dust thoroughly and ensure indiffusibility of dust. The product consists of layers of pe films with digital labels of 1-30++++ on left or right lower corners of each layer to facilitate replacement. Firstly, tear the protective layer on the sticky surface off from the opening of the back. And then, stick it on clean dry access floor level. Press and level the sticky mat on the ground with sole. Tear the protective layer off from the opening of the right side. At this point, it can be used. If the surface of the sticky piece is full of dust during its use, this layer shall be torn off from the opening and then the next clean layer can be used. 30 pages /volume, 10 volumes / box, 5 boxes / case.
It can effectively stick and remove dust from soles , wheels and products to minimize the effect of dust on quality of clean environment. In this way, dust removal is easily achieved, unlike other mats that can not remove dust thoroughly and ensure indiffusibility of dust. The product consists of 30 layers of pe films with digital labels of 1-30++++ on left or right lower corners of each layer to facilitate replacement. Firstly, tear the protective layer on the sticky surface off from the opening of the back. And then, stick it on clean dry access floor level. Press and level the sticky mat on the ground with sole. Tear the protective layer off from the opening of the right side. At this point, it can be used. If the surface of the sticky piece is full of dust during its use, this layer shall be torn off from the opening and then the next clean layer can be used. Specifications: 18*36inch; 24*36inch; 26*45inch (other specifications can be customized) Color: blue, white (other colors can be customized) Packing method: 30 layers /piece, 10 pieces / box, 5 boxes / carton.
Sticky mats effectively prevent foot-borne and wheel-borne contamination from entering controlled areas by pulling dirt and debris off passing surfaces. These 30-layer floor mats are made of high strength PE materials, coated with water-based acrylic adhesive in our ISO Class 6 cleanroom (Cleanroom Class 1,000). They are available in 3 colors (white, blue or grey) and 4 standard or customized sizes to fit your needs.
Features Clean room sticky mat Substrate film Material Polyethylene Color White & blue Thickness Microns 35 ± 5 Mat size Regular 18'' * 36'' inch * 30 layers 46cm * 90cm * 30 layers 24'' * 36'' inch * 30 layers 61cm * 90cm * 30 layers 26'' * 45'' inch * 30 layers 66cm * 114cm * 30 layers Others Customizable Packing Carton 10 pieces / ctn or customizable Rupture elongation coefficient > 250% Adhesion type Water based adhesive Tensile strength Kg /cm2 > 170 Adhesion power G /25mm ( 100 - 1200 ) ± 50 1.Pe filmand material and water based adhesive 2.Convenient to use , environmental protection, our price is competitive; 3.Can easily remove sand/dust those dirty stuff from your shoes 4.No glue falling, odorless, non-toxic, a green production 5.Widely used in cleanroom, workshop of factory, industry
Attribute Details Place of Origin Jiangsu, China Brand Name Myesde Product name Cleanroom Use Tacky Mat Sticky Mat Dust Remove Sticky Floor Mat Size 18''X36'', OEM size available Film Material LDPE Adhesive Material Water-based acrylic Film Thickness 3C Color Blue, white Layers 30 layers Application Cleanroom Feature Eco-Friendly, Dust Remove Usage Cleanroom Packaging Details Packing: 10pcs/case, 5cases/ctn Port Shanghai Supply Ability 10000 Piece/Pieces per Day Cleanroom Use Tacky Mat Sticky Mat Dust Remove Sticky Floor Mat
Disposable sticky mats 24"*36" disposable sticky mats 24"*36" disposable sticky mats 24"*36" Sticky mats Functions: - remove particles from shoes and wheels in each entry to the cleanroom Specifications: - made of thin layers of adhesive coated polyethylene film - various sizes, colors and styles - adhesive backing guarantees the mat stick to the floor - sheets are peeled off sequentially to expose a fresh adhesive sheet Applications: - cleanroom entrances - hospitals - operating rooms - factory-to-office entrances and other work areas requiring high level of cleanness Disposable sticky mats 24"*36" disposable sticky mats 24"*36" disposable sticky mats 24"*36" -
OTG ROMANIA, Disposable sticky mats 24"*36" (60x90 cm) , 50 microns layer thickness, 30 layers/mat Decontamination mats (Sticky mat) contain a non-toxic acrylic antimicrobial additive with antimicrobial and virucidal effect that destroys pathogens (up to 100 million bacteria per gram). The mat is bacteriostatic (prevents the development of bacteria) and destroys existing microorganisms on the objects it comes in contact with (gram positive bacteria, gram negative bacteria and pathogens) due to the chemical agent benzisothiazolin-3 -one, impregnated in the carpet Properties: Bactericidal, fungicidal, tuberculoid, virucidal, sporicidal. Specifications: Composition: mixture of polymers from polyolefin resins. Adhesive: contains a non-toxic acrylic antimicrobial additive that provides protection. Packaging: 8 pads / carton Each pad is enveloped in a PE foils for protection.
It can effectively remove the dust from the sole and wheel, maximum reduce the dust affect the cleanly environment, it can remove the dust easily. Sticky mat can effectively prevent pollutant and particle due to personnel's flowing entered the strict request working conditions, then keep working conditions is clean. Size Pcs/ctn G.W./ctn Meas(mm) Volume 18"*36" 104KG920*460*250.01 24"*36" 106KG920*620*250.014 18"*45105KG1150*460*250.013 26"*45" 108KG1150*660*250.019 36"*36"108KG920*920*250.021 36"*45" 1010KG1150*920*250.026 36"*60 1013KG1530*920*250.035.
Technical specification Color White Material Felt with self adhesive coating/ pe membrane Thickness Appr 1.7 mm Width 100 cm Roll length 25m Weight 160 g/m2(+/5%) Construction Top layer is pe foil Middle layer is nonwoven fleece Bottom layer is self-adhesive coating H.S code: 56039490 Features 1)non-slip on stairs , fixation with no tape, for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for flooring. 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected Optimally even under unfavorable conditions. 3)makes for a clean and safe building site
A).Technical Specification: Color White Material 100% Polyester Thickness Appr 1.7 mm Width 100 cm Roll length 25M Weight 160 g/m2(+/5%) Construction Nonwoven fleece in middle,top with PE foil and bottom with anti-slip coating H.S code: 5603949019 B).Features: 1)non-slip on stairs , fixation with no tape,for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. C).Applications: 1)safer and more effective protection for covering soil of all kinds, carpets, tiles, furniture ets 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected optimally even under unfavorable conditions. 3)makes for a clean and safe building site
A).Technical Specification: Color White Material 100% Polyester Thickness Appr 1.7 mm Width 100 cm Roll length 25M Weight 160 g/m2(+/5%) Construction Nonwoven fleece in middle,top with PE foil and bottom with anti-slip coating H.S code: 5603949019 B).Features: 1)non-slip on stairs , fixation with no tape,for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. C).Applications: 1)safer and more effective protection for covering soil of all kinds, carpets, tiles, furniture ets 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected optimally even under unfavorable conditions. 3)makes for a clean and safe building site
Technical specification Colorwhite Materialfelt with self adhesive coating/ pe membrane Thicknessappr 1.7 mm Width100 cm Roll length25m Weight160 g/m2(+/5%) Constructiontop layer is pe foil Middle layer is nonwoven fleece Bottom layer is self-adhesive coating H.S code:56039490 Features 1)non-slip on stairs , fixation with no tape, for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for flooring. 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected Optimally even under unfavorable conditions. 3)makes for a clean and safe building site
Product: multifunctional protection and covering nonwoven with adhesive coating Material: nonwoven synthetic fleece in middle top with PE foile as liquid barrier bottom with anti-slip coating Colour : White Applications: tiled floor Parquet laminate flooring, textile floor Stairs Kitchen worktops, ceramics, sanitary ware, flat work Plants Features: non-slip on stairs no fixation with tape, for secure construction sites. impermeable, protects concrete against liquids of any kind (paint, solvents, ..) extremely robust and tear-resistant does not moult when wiping easy installation and disposal it can be wiped and vacuumed No residues were on the ground Benefits: Protects carpets, stairs, tiles against mechanical damage and stains from spilled liquids. Helps prevent accidents back with active antiskid Fast and wrinkle-free design time savings Used several times Cost savings Environmentally friendly, Free of harmful substances, thermally disposable Note: important for newly laid floors, porous stone floors and clay tiles is not suitable Installation: Lay 10 cm overlaps Packing role long 50M, 25M,10M roll width 100cm diameter ca 20cm,15cm,9cm
A).Technical Specifications: Color Blend grey Material 15% cotton/ 85% synthetic fiber Thickness Appr 1.5-2 mm Width 100 cm Roll length 50 M Weight 180 g/m2(+/5%) Construction Nonwoven fleece fabric + transparent anti slip PE foil on battom H.S code: 5603949019 B). Features: (1) Protection against liquids and mechanical damage (2) Simple, clean and fast interpreted (3) Absorbent surface, impermeable underside of sheet (4) Anti-slip bottom for a secure grip ( slip â??resistant undersurface for secure grip) (5) Reusable, damp-proof C).Applications: Suitable for various areas of application in the craft and the construction: (1) Suitable for covering and protection of floors, carpet and furniture in drywall , scaffolding, renovation, relocation, painting and plastering work. (2) Fixed stop on stairs and ladders. (3) Used as a bed cover for animals, as a protective blanket in the car or on soil protection on parking of bicycles and prams
Technical Specification Color White Material 100% Polyester Thickness Appr 1.7 mm Width 100 cm Roll length 25M Weight 160 g/m2(+/5%) Construction Nonwoven fleece in middle,top with PE foil and bottom with anti-slip coating H.S code: 5603949019 Features 1)non-slip on stairs , fixation with no tape,for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for covering soil of all kinds, carpets, tiles, furniture ets 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected optimally even under unfavorable conditions. 3)makes for a clean and safe building site
