Find Verified Steel Cantilever Racking Suppliers, Manufacturers and Wholesalers

Cantilever racking, composite structure, it mainly used for storage of long figure goods, annulation’s material , plates and tube material. It can separate for light duty,middle duty and heavy duty types according to load capacity, while it can separate for single and double types according to its structure. Features: 1) The cantilever racking is suitable for storing long, circular or irregular shape articles 2) It's suitable for the storage and reorganization of the tall and slender good 3) There are two structures_single arm and double arms. 4) It fit for small space and low warehouse 5) It is easy to fetch or place goods. 6 Mark: non-standard specification is available.

Cantilever Racking 1. which also called arm rack, is ideal for loads that require no obstruction at the pick face, so that bulky and awkwardly sized or shaped products can be safely stored and accessed. 2. Allows to use the warehouse space more efficiently - don't need to waste horizontal space with awkward posts and columns obstructing storage areas. 3. Items best suited to such a system include furniture, building materials, piping, rolls, appliances, and flooring. 4. Can fit this racking system to your facility by adjusting the shelf height, ensuring that the maximum amount of vertical storage space is maintained. 5. The support arms can vary in depth and capacity depending on the type of load. Open rows allow not only secure load support but also easy access safety, flexibility and selectivity are all maintained. 6.Shelves can be adjusted per 50/140mm pitch. 7.Corrosion resistant: tough power coat finish resists rust and cratches. Material Cold-rolled Steel Upright 300*40;250*40;200*40 Arm 100*40/100*50/120*40/120*50/140*50/160*50/180*50mm Product size Height:3000/4200/4500/4800/5025/6000/7500mm Depth:1200/2500mm Length:2100/3150/4200/5250/6300/7350mm Thickness Upright:2.0/3.0mm Arm:2.0/2.5mm Load Capacity 1000/4500kg per level Layer 2-6 Adjustable layers(customised) Color Upright:Blue; Beam:Orange Surface finish Power Coated

Features: 1) The cantilever racking is suitable for storing long, circular or irregular shape articles 2) It's suitable for the storage and reorganization of the tall and slender good 3) There are two structures_single arm and double arms. 4) It fit for small space and low warehouse 5) It is easy to fetch or place goods. 6 Mark: non-standard specification is available.

Cantilever rack upright are welded by cold-rolled C-type profile, according to the steel structure design theory, this structure make full use of the materialâ??s anti-load capacity, with light weight, strong carrying capacity, low cost characteristics, the pitch on the upright between upright and arms is 50/100mm, so the cantilever rack can be adjusted up and down from this height. Such kind of cantilever rack is widely used in machinery industry and architectural material industry. High effeiency on the storage of timber,pipes,ring form materials and so on.Goods can be carried out by forklift, crane or manual. It can be customized according to your requiremrnts.

Product Cantilever Rack MaterialSteel Q235B Width1800mm,2000mm,2300mm,2500mm,2700mm Depth600mm,800mm,900mm,1000mm,1200mm Height 1800mm,2000mm,2500mm,3000mm,4000mm,4500mm, 5000mm,5500mm,6000mm,7000mm,7500mm,8000mm, etc Box Beam 80*50mm,90*50mm,100*50mm,110*50mm,120*50mm, 130*50mm,140*50mm,160*50mm, thickness 1.5-2.0mm Upright90*66mm,100*70mm,100*95mm,120*95mm, 120*70mm,140*95mm,160*120mm,thickness 1.8-2.5mm ColorBlue, orange or customized FinishCorrosion protection, outdoor powder coated, robot welding Loading Capacity1000-5000kg per layer Installment InstructionAvailable Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: Haiding Model Number: HDGR008 Type: Cantilever Rack Material: Steel Q235B Feature: Corrosion Protection Use: Warehouse Rack Certification: ISO9001:2008 Depth: 1.5-3.0mm Weight Capacity: 500-4000kg/level Width: Customized Height: Customized Product name: Cantilever Rack Color: Blue,Orange,Customized Color Finish: Power Coating Installment Instruction: Available Packing: Customers'Request Loading: Customized Welding: Robot Welding SupplyAbility SupplyAbility: 50000 Piece/Pieces per Month Packaging & Delivery Packaging Details Standard Export Packing 1.Plastic Film 2.In Air Bubble Film 3.Customed Package Port Guangzhou,Shenzhen Lead Time : 15-25 Days After Deposit

Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.

Specifications: 1). Size: to order 2). Level: to order 3). Loading Capacity: 100~1000KG/two cantilevers 4). Finished:Powder coated 5). Be fit for: Directly put long products. Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity,powder coated color etc.

Upright shaft is usually made of H type steel or cold rolling steel or frame, square tube, cold rolling steel or H type steel are used to make arms. Cantilevers are assembled to upright shafts by composite type or bolts & nuts which is also for the fixation between base and uprights. Level height is adjustable. Loading and unloading of goods can be done manually or by forklifts. The height of cantilever racking is usually lower than 2500mm (the height up to 6000mmby using forklifts for loading); length of arm is shorter than 1200mm, and loading capacity is no more than 1200kg per arm. Cantilever racking is mainly used in the Mechanical Manufacturing Industry and markets for building materials. There are three kinds of cantilever racking, light duty, medium duty and heavy duty, each kind of cantilever racking has different loading ability, as well as different material. plastic film as inner package

It could be divided into single side cantilever racking and double side cantilever racking according to the structure. The cantilever racking has specific advantages for the storage of the strip type cargoes, such as tubing, plate and irregular goods, etc. This racking is especially suited to the warehouse with small space and low density after adding the board. It is easy and fast to operate and manage and has an open view. The efficient use of space is more reasonable than other racking.

Cantilever racking-multi-arms racks (fully bolted structural i-beam) The cantilever racking has specific advantages for the storage of the strip type cargoes, such as tubing and plate, etc. According to the carrying capacity, it can be divided into single side cantilever rack and double side cantilever rack according to the structure. Multi-arms rack features: 1) composite structure 2) size and capacity can be fixed by users, allows extra long items to be stored. 3) mainly used for the storage of long, circular or irregular shape goods 4) high quality steel, plastic sprayed in the surface and color optional

Detailed product description: 1) this rack can be divided into a single sided or double sided cantilever rack 2) parts: upright poles, single face cantilever, two face cantilever safety pins, wire footing plates 3) material: high quality steel; plastic sprayed in the surface and color optional 43) max single arm load capacity: 150-650kg 5) cantilever racks can store nearly any type of load. They are especially useful for storing long, bulky, or oddly-shaped loads. 6) with no front column in the way, cantilever racks are faster to load and unload, lowering handling time and costs. 7) loads may be placed anywhere along the entire length of a row on a cantilever rack. 8) the lack of a front column saves horizontal space normally lost to rack structure. Handling clearance is also more abundant. 9) both reduced handling times and increased space utilization make cantilever racks more cost-efficient. Additionally, cantilever racks become more economical as load length increases, while standard pallet racks increase in costs. Film

The ideal solution to store long and awkward oversized goods is cantilever racking. It is perfect for the storage of packs of timber, steel bars, tubes, long length goods. It is available in both single sided and double sided configurations. The double sided rack provides maximum strorage capacity on a single central column while the single sided rack is designed to fit flush against a wall.

Cantilever rack Suitable for storage of long, plate type or ring type materials; cantilever extended forward features structural stability, good load bearing capacity, easy management and wide view; Such racks can be classified to light, medium and heavy racks according to different load bearing capacity, and to single face and 2-face cantilever according to storage faces. Upright: 80x65x2.0mm, 90x67x2.0mm, 100x67x2.0mm, 120x95x2.5mm We can supply according to customerfs requirement.

As one of the best Cantilever Rack Manufacturers in Noida, India, we promise that our offered Cantilever Rack will give you value for money. Call Now.