Streamline shape design make the oven looks great. Touch screen and PLC controlling system .It can save 50 groups temperature parameters and provide extra 2 ports for profile testing.
The software has the functions like , temperature setting and editing, PCB parameter menu, and profile testing, alarms and multi-languages conversion.
Brand electrical component like Schneider (German) breaker, KETE(Korea) SSR, Omron (Japan) box breaker. Meanwhile the CE certificated blower is specially design for lead-free reflow oven. It runs stable and lower noise.
Upper zone and hood can be opened by the electrical screw automatically. It is very convenient for cleaning and maintenance.Electrical pole will hold the upper zone and cover, even when power is off suddently, the cover will not drop down. It's much safer than the air cylinder holder.
Specially designed Ni-Cr heater filaments, provide a very quick ramp up time. It takes just 15 minutes from ambient to setting temperature.
The inner tunnel of the oven is made of stainless steel which easy for cleans.
The entire upper and bottom zones are forced air convection; provide great temperature accuracy and uniform.
Stainless steel mesh belt and pin chain conveyor work together.
Industrial chiller provides better cooling performance.
Juicer, mixer grinder, pressure cooker, electric iron, toaster, frying pan, water purifier, water dispenser, mixer/blender, dry iron, kettle, gas stove , non stick cookware, water heater, air cooler, water purifier, electric chimney system ceiling fan others, kitchen appliances, range hood.
QS-5180C Desk Infrared reflow oven Introduction
The "MINI IR REFLOW OVEN" is equipment that used for electron production and maintain of SMT technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control curve match to the request of the SMT production technique completely. The "temperature control curve" of the equipment can be adjusted accurately, so it can satisfy the request of many kinds of soldering paste which are different material parameters. It can shut down and alarm the faults automatically. Also it has many functions, such as soldering, maintenance and drying.
The structural performance and operation has been upgraded and improved. Using Chinese-English bilingual operating system and efficient and convenient power switch.
Main technique parameter
1.Working voltage: AC220V(AC110V order)
2.Working frequency:50-60Hz
3.Maximum output power: 1650W
4.Heating methods: infrared radiation and hot air mix heating
5.Operating system: Chinese-English operating system
6.Working mode: automatic soldering mode, maintenance mode adjustable
7.Temperature curve paragraph: warm-up, heating, soldering, heat preservation and cooling segment.
8.Range of temperature and time on warm-up: 70~150 c, 0~5Min
9.Range of temperature and time on heating: warm-up temperature to 220 c, 0~5Min
10.Range of temperature and time on soldering: heating temperature to 300 c, 0~30s
1.Range of temperature and time on heating preservation: soldering temperature -(0~50 c)
12.Tray specifications: 305*320mm
13.Size: 460*372*275mm
1. The brand computer and Siemens PLC intelligent control system, high precision temperature control is ± 1-2 â?? (if the computer crash accident, it can realize off-line work, do not affect production) and to ensure that the control system is stable and reliable;
2. Windows XP operating interface with powerful and simple operation.
3.In order to ensure safety and reliability, the cylinder body can be lift up automatically.
4. Device is equipped with mesh belt, transport smoothly, no shaking and no deformation, which ensure smooth PCB transport. Synchronous guide transmission mechanism and automatic SMT machine online connection ensure that guide adjustable wide precision and high service life.
Features
1.Adjustable door lock, self-suitable observation window frame, disposable molding silicone seal, to ensure long-term stable sealing.
2. PID temperature control instrument, more accurate.
3. The special function keys to achieve temperature setting.
4.Auxiliary menu, realized over-temperature alarm, deviation correction, menu locking.
Technical parameter:
Temperature control range: room temperature +10~250
Temperature resolution: 0.1
Constant temperature volatility: ±1
Vacuum degree:
1.Use Windows operation interface, easy to operate;
2.Leading heating mode, solve the corner when the reflow soldering welding problem, suitable for CSP, BGA, 0201 chip, and other electrical components of the welding;
3.Professional rotor design, wind speed stability, effectively prevent the PCB heating uniformity of the wind, to the repeated heating of the highest;
4.Compulsory independent loop to various temperature zones, independent PID control, and independent heating mode, make the furnace chamber temperature accurately, even, heat capacity is big.
5.Thermal insulation layer is made of high quality aluminum silicate insulation materials, heat preservation effect is good, warming faster, from room temperature to the working temperature of 15 minutes.
6.Furnace, lead-free green design;
7.High quality high temperature and high speed motor transport wind smoothly, little vibration, low noise;
8.Furnace using cylinder jack-up, safety rod support, safe and convenient;
9.The transmission way of PCB machine adopts automatic electronic speed, chain network ,synchronization, good stability;
10.Special high quality aluminum alloy guide, automatic refueling system, ensure guide rail adjusted the service life of the high precision and wide;
11.Equipped with UPS power protection function, ensure the normal output after power PCB, avoid damage;
12.Powerful software function, the PCB online temperature measurement, and analyze the data curve at any time, storing and printing;
13.PC and PLC communication with PC/PP agreement, stable work, put an end to crash;
14.Automatic monitoring and display equipment working state;
15.Special furnace design, good heat preservation, adopt special heating element, heat with
Wholesale qs-5100 ic heater infrared reflow wave oven
Introduction
The "ir lead-less reflow oven" is equipment that used for electron production and maintain of smt technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control curve match to the request of the smt production technique completely. The ¡ãtemperature control curve¡à of the equipment can be adjusted accurately, so it can satisfy the request of many kinds of soldering paste which are different material parameters. It can shut down and alarm the faults automatically. Also it has many functions, such as soldering, maintenance and drying.
The structural performance and operation has been upgraded and improved. Using chinese-english bilingual operating system and efficient and convenient power switch.
Main technique parameter
1.Working voltage: ac220v(ac110v order)
2.Working frequency:50-60hz
3.Maximum output power: 600w
4.Heating methods: infrared radiation and hot air mix heating
5.Operating system: chinese-english operating system
6.Working mode: automatic soldering mode, maintenance mode adjustable
7.Temperature curve paragraph: warm-up, heating, soldering, heat preservation and cooling segment.
8.Range of temperature and time on warm-up: 70~150 c, 0~5min
9.Range of temperature and time on heating: warm-up temperature to 250 c, 0~5min
10.Range of temperature and time on soldering: heating temperature to300 c, 0~30s
11.Range of temperature and time on heating preservation: soldering temperature(0~50 c)
12.Tray specifications: 180*120mm
13.Size: 300*250*160mm
Features:
Control system:Computer or Instrument control,make sure machine working steadily.
Hot air heating:Both top and bottom zones hot air heating,good heater compensatory,High thermal efficiency,energy saving,speedy heating,suitable for soldering components like BGA, CSP etc. Special forced hot air circulation structure makes PCB and components heat evenly, Temperature Accuracy ± 1.5 , room temperature settling time less than 20 minutes.
PID intelligent precision controller,automatically control heating volume, fuzzy control function changes the external heating fast,and by internal control ensures more balanced temperature.
Use imported big current solid relay,without touch point output,safe,reliable,with special SSR radiator,greatly improve thermal efficiency and lifetime.
Temperature protection: ETA using third-party over-temperature protection, multiple layers protection to ensure safe operation.
Products comply with CE, CCC, UL and other standard or specifications.
User-friendly design: fault detection (such as heaters abnormal alarm, etc.), regular maintenance reminders, the economy functions and tool-free maintenance, reducing equipment failure rates.
Main parts:Imported main parts ensure equipment runs smoothly and lower the maintenance cost.
ModelMachine
Jaguar F10
Heating System
Number of heating zones
Up 10/ bottom 10
Number of cooling zones
2
Length of heating zones
3700mm
Heating mode
Hot air
Cooling Mode
Forced air cooling
Exhaust Volume
10m³/min * 2 exhausts
Conveyor System
Max. Width of PCB
400mm
Mesh belt width
450mm
Transmission Direction
Lâ??R(option: Râ??L)
Transmission Net Height
900±20mm
Transmission type
Mesh and chain
Range of rail width
50-400mm
Conveyor speed
0-2000mm/min
Auto/manual Lubrication
Standard
Fixed rail side
Front rail fixed(option: rear rail fixed)
Components high
Top and bottom 25m
Control system
Power supply
5 line 3 phase 380V 50/60HZ
Total power
58KW
Starting power
50KW
Normal power consumption
10KW
Warming time
20 mins
Temp. setting range
From room temp. To 300â??
Temp. control method
PID close loop control & SSR driving
Temp. control precision
±1â??
Temp. deviation on PCB
±2â??
Data storage
Process Data and status storage(80GB)
Nozzle plate
Aluminum Alloy Plate
Abnormal Alarm
Abnormal temperature (extra-high/extra-low temperature)
Board dropped alarm
Tower light:
Yellow-warming, Green-normal, Red-abnormal
General
Dimension(L*W*H)
5400*1320*1490mm
Weight
2300kg
Color
Computer gray
FEATURE OF PRODUCT Fully meet all kinds of lead-free soldering process requirements; WindowsXP operating system, Chinese and English interface, easy to learn; Standard air furnace, patented hot air system, using hot air convection conduction is more efficient, thermal compensation is faster; PLC+PID closed-loop control, stable and reliable performance, high temperature control and curve repeatability; Dual temperature sensor, dual safety control mode, abnormal speed alarm, off-board alarm; Fully modular design for faster maintenance and reduced maintenance time and cost; The rail is dael with hardened process to make it more stability.
The conveyor chain adpoted with single Pin-plate design.
15% Heat transferring efficiency wasimproved to deal with more complicated and larger products.
FEATURE OF PRODUCT Fully meet all kinds of lead-free soldering process requirements; WindowsXP operating system, Chinese and English interface, easy to learn; Standard air furnace, patented hot air system, using hot air convection conduction is more efficient, thermal compensation is faster; PLC+PID closed-loop control, stable and reliable performance, high temperature control and curve repeatability; Dual temperature sensor, dual safety control mode, abnormal speed alarm, off-board alarm; Fully modular design for faster maintenance and reduced maintenance time and cost; The rail is dael with hardened process to make it more stability.
The conveyor chain adpoted with single Pin-plate design.
15% Heat transferring efficiency wasimproved to deal with more complicated and larger products.
1.The drying oven body is made of high quality cold-rolled steel sheet powder coated which is tuff and rustproof.
2. The chamber is made of high quality stainless steel chamfer angled which is smooth and very easy to clean.
3. Between the oven body and the chamber itâ??s stuffed with high quality thin glass fiber thermic insulant which has fine heat insulation feature. So the temperature in the chamber is stable and accurate without interference from the environment.
4. It is easy to observe the inner samples through the double glass door (in the front it is armoured glass). The double glass door also has good heat preservation to protect the operator from scald.
5. The heat resistant silicone rubber sealant between the chamber and the glass door ensures the high vacuum level in the working chamber.
6. The heater is installed around the outside surface of the chamber to enhance the temperature uniformity and to serve the convenience of inner chamber cleaning.
7. The microchip intelligent digital temperature controller has industrial PID auto-tuning function and 4-digits double LED display. It has the features of high temperature control accuracy, high anti-interference and easy operation. (Refer to the detailed controller manual)
Application of the Vacuum Drying Oven
This vacuum drying oven is used for the laboratory and workshop in the research institutes, colleges, industrial enterprises to dry or heat treatment. The advantages of drying in the vacuum environment are as followed:
1) Low temperature is applicable.
2) To avoid oxidation for some heat-sensitive samples.
6 zones Reflow oven machine GT-R6
PCB Soldering Oven Core Technology
Long effective 6 reflow heating zones
With a long effective heating zone in the industry, the heating distribution is reasonable from top to bottom, ensuring uniform and sufficient heat conduction. This greatly improves heating efficiency. By adopting customized heating wire from GTSMT, we achieve high heating efficiency and a long service life.
Imported Hardware for the reflow oven machine
The control system adopted with Siemens PLC & modular circuit to stabilize and accurately repeat precision
Adopted foreign famous brand material as its major parts, which guarantees durability and reliability.
Conveyor with well parallel and transmission is stable
The rail is dealt with through a hardened process to make it more stable. Segment design that can release the pressure makes guide rail more durable, not easy to bend and deform also not drop board.
Mesh belt and chain transmission
reflow oven transmission
The conveyor system adopts both a mesh belt and chain, which is suitable for the efficient production of various products.
The chain adopts the automatic tensioning design to ensure that the long-term use is not loose and the board will not drop.
Simple operation management
An alternative to the Win 10 operation system English interface is available on the screen. The intelligent diagnosis system features functions such as Trouble Remind, Alarm List-out, and Report Saving. All production data will be backed up automatically and easily for ISO 9000 management.
Reflow Oven Specifications
No. System Item GT-R6 Reflow Oven
1 Size and Power Dimension (L*W*H) mm 4400*1400*1635
2 Exhaust Volume 10m�³/min*2(Channel)
3 Power Supply 3�? 380V/220V 50/60HZ
4 Startup Power 22KW
5 Normal Power Consumption 9-10KW
6 Heating System No. of Heating Zone Top6 Bottom6 or Top7 Bottom7
7 Length of Heating Zone 3100mm
8 Warming Time Approx 5-15min
9 Temperature Setting Range Room temperature â?? 200�°C
10 Temperature Control Type PID closed-loop control, SSR driven
11 Temperature Control Precision �±1�°C
12 Temperature Deviation on PCB �±2�°C
13 Cooling System No. of Cooling Zone 1 or 2
14 Cooling Method Air cooling
15 Rail Structure , Integral segmented
16 Max. PCB Size 500mm
17 Chain Structure Single pin buckles
18 Transport System Component Height Top 100mm Bottom 25mm
19 Auto-Lubrication Automatic+Manually
20 Conveyor Height 900�±20mm
21 Conveyor Direction L-R (R-L Option)
22 Conveyor Speed 0~2000mm/min
23 Fixed Rail Side Front rail fixed
Model
JAGUAR A8
Heating System
Number of heating zones
UP 8/BOTTOM 8
Number of cooling zones
1
Length of heating zones
2800MM
Heating mode
Up:hot air; bottom: IR
Cooling Mode
Force air
Conveyor System
Max. Width of PCB
350mm
Mesh belt width
400mm
Transmission Direction
Lâ??R(or Râ??L)
Transmission Net Height
880±20mm
Transmission type
Mesh
Conveyor speed
0-1000mm/min
Fixed rail side
Front rail fixed(option: rear rail fixed)
Control system
Power supply
5 line 3 phase 380V 50/60Hz
Total power
38kw
Starting power
34kw
Normal power consumption
4KW
Warming time
About 20 mins
Temp. setting range
Room temperature-300â??
Temp. control method
PID close loop control & SSR driving
Temp. control precision
±1â??
Temp. deviation on PCB
±2â??
Data storage
Process Data and status storage(80GB)
Nozzle plate
Aluminum Alloy Plate
Abnormal Alarm
Abnormal temp. (extra-high/extra-low temp.)
Board dropped alarm
Tower light:Yellow-warming, Green-normal, Red-abnormal
General
Dimension(L*W*H)
4200Ã?700Ã?1320mm
Weight
800KG
Color
Computer gray
