Place of Origin: Guangdong, China (Mainland) Brand Name:Repumag Model Number: N35-N55 Type: Permanent Composite: NdFeB Magnet Shape: special-shaped magnet Application: Industrial Magnet Certification: ISO 9001/TS 16949 Material: Neodymium Iron Boron Grade: N35-N52- NSH/customized Packaging & Delivery Packaging Details: Inner box and Outer Carton,Standard sea or air package, also can according to clients' requirement Delivery Time:Within 7-30 days after order confirmed.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications. Advantages of Flexible Magnet: Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes. Technical Data of Flexible Magnet: Shapes: Rolls or Sheeting & Strips Magnetization: Axially Magnetized Br: 1,600 Gauss BHmax:0.60 MGOe Hc: 1,370 Oersted's Max Operating Temperature:212F/100 Density(lb/in3): 0.133
Steel,steel pipe,steel tube,stainless steel,circular steel pipe,hollow section steel tube,pipe fitting,flange,fasteners,steel wire,steel accessories,steel product,magnet, ndfeb magnet,smco magnet,alnico magnet,ferrite magnet,ceramic magnet,flexible magnet,magnetic material,magnet accessories, chemical,organic chemicals,chemical additive.Transportation agent,customs clearance service,
Description : The most powerful magnets commercially available Manufactured by a powder metallurgical process involving the sintering of powder compacts under vacuum Grinding and slicing possible Very reactive with moisture and oxygen A variety of Coatings can applied depending on the environment of the application Applications : various types of electric motors, engineering equipment, medical equipment, audio apparatus and household appliances
Sintered ndfeb magnets Th magnets has the manufacturing capacity of 3000 tons annually, the main brands are: N45, n48, n50, n52; N45m, n48m, n50m; N41h, n44h, n46h, n48h; N40sh, n42sh, n44sh, n46sh; N35uh, 38uh, n40uh; N30eh, 33eh, n35eh, n38eh; N28ah, n30ah, n33ah etc.
Sintered ndfeb magnet Ndfeb, the third generation of rare-earth permanent magnet, is the most powerful and advanced commercialized permanent magnet today. Ndfeb has the high remanence, high coercive force, high-energy product and high performance/cost ratio, it can be formed into various sizes and widely used in many fields such as aviation, electronics, instruments, meters, machine, medical instrument and the like. It is especially suitable for the development of high-performance, compact and light products. A variety of coatings can be applied to the ndfeb magnets' surface to overcome the principle drawback of neodymium-based magnets, their tendency to corrode easily.
Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. We also provide excellent Sintered NdFeB Magnet and Bonded NdFeB magnets for multipurposes. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex
Product Description NdFeB Magnet is the most powerful commercially produced magnets. · NdFeB Magnet has a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe. · NdFeB Magnet can replace SmCo Magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade. · NdFeB Magnet has very high strength. · Relatively low cost. · Compared to Alnico and SmCo magnets, relatively easy to machine Additional Info Brand: CBNB Transportation: Ocean,Land,Air Place of Origin: China
Magnetic Writing and Drawing Board Material: ABS+ Magnet
Magnetic Stirrer Digital LCD Display Last Measurement in Memory Heating amp Stirring can proceed Simultaneously Bushless Motor for Low Noise Anti scratch and Corrosion Resistance Ceramic Plate Surface ABS Cabinet Brand Labtical Model NameNumber MS5LH Type Magnetic Stirrer Speed range 1002000rpm Maximum mixing capacity 5000 ml Temp Range amp Accuracy 300C Accuracy 1C Temperature Sensor PT100 Time range 099h99min Top Plat Size 168 x 168mm Display LCD Motor Type Bushless Motor Operating Mode Temperature Speed Timing Memory last data Power 500W Power Supply AC 220V 5060Hz Packing Dimension 335 x 235 x17cm Weight 25kg
- PVC Seal with Magnetic strip - 135,180°degree - Flexible PVC with Rigid PVC - For 5,6,8,10,12mm tempered glass.
Product : Technology: Utilizes new sintered ndfeb magnet techniques and equipment such as strip casting, hddr technology Magnetic properties: High coercive force, the max operation temp is up to 200 degree centigrade or 380 curie temperature; Grades: N35-n52, 33m-48m, 33h-48h, 30sh-45sh, 30uh-38uh and 30eh-35eh; Shapes and sizes: Disc, cylinder, block, cube.Ball.Ring and according to customers' request . Coatings: Nickel, zn, black epoxy, black nickel , nickel -cu-nickel, ag, au etc. Motor magnet applications: Widely used in different applications, such as sensors, motors, rotors, wind turbines/wind generators, loudspeakers, magnetic hooks, magnetic holder, filters automobiles and so on. Quality control : Our qc team consists of more than 12 professional people to ensure 100% products high quality . Extremer power warming : These magnets are dangerous ! if your fingers are trapped between two they will cut your skin . Please be note they should only be handled with great care . Transportation : By air, by sea, by dhl, fedex, ems, ups, fedex Standard export carton
Material: sintered ndfeb magnet Grade: N48 Dimensions: 2" L x1" W x 1/2" T Tolerances: Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (through 1/2") Max Operating Temp: 176oF (80oC) Application: Wind Turbine Since the first oil crisis in 1973 and the radiation leak at Fukushima in 2011, more and more eyes on wind power. For example, affected by the nuclear leakage accident in Japan, Germany will plan to abandon nuclear power to generate electricity completely. And the same time, strive to develop new & Renewable Energy, such as wind power and solar energy. Refer to wind power, magnet which plays important role in wind turbine generator to generate power cannot be ignored. At present, the magnet which used on wind turbine alternator is Sintered NdFeB magnet (Commonly known as magnet king, permanent magnet, rare earth magnet); The common grades are N42, N48, N50, and N38SH and so on; The common shapes are segment, block, wedge, and trapezoid; The coating is Ni-Cu-Ni triple plated The biggest block magnet for wind turbine generator is about 240x80x40 mm (the thickness cannot over 50mm) The normal block size is 2 (2 inches x 1 inch x 1 inch) China also develops wind energy rapidly these years. In 2011, there is half Wind Power Equipments for the whole world made in China. In this field, China is ahead of Germany and USA, and dominates the industry. This mainly depends on domestic magnet manufacture. Recently, considering high cost in purchasing wind turbine from China, many customers plan to purchase accessories and material and make wind turbine by themselves. Of course, this includes magnet purchase from China. China magnet source care customers benefit and will provide Wind Turbine Permanent Magnet with good quality, reasonable price; to satisfy customers requirement in making family-type or industrial wind turbine. 1. To delivery by air or by express: Anti-magnetic package (six sides iron sheets in the carton); 2. To Ship by sea: normal hard Paper Carton and Pallet; 3. To as per clients' special requirements.
Material: sintered ndfeb Grade: n45 Dimensions: 25 od x10 id x20 thick mm Tolerances: 0.05mm Plating/coating: ni-cu-ni (nickel) Magnetization direction: axial (poles on flat ends, through 20mm) Max operating temp: 176of (80oc) Application: industry magnet The rare earth permanent magnet is widely used in industrial fields as well as high-tech science and technology, which including electrical, automotive, instrumentation, medical, communications, mechanical and electrical, electronic and electro-acoustic, aerospace and other technology areas. Our company adheres to the "customer first, positive ahead¡¡à as our business philosophy, insists on the principle of" quality first "to provide high quality service for our clients. 1. To delivery by air or by express: anti-magnetic package (six sides iron sheets in the carton); 2. To ship by sea: normal hard paper carton and pallet; 3. To as per clients' special requirements.
Product profile: We can produce the largest size of NdFeB permanent ring in the world, suitable for some large size and high pricision equipment This magnet ring is made of NdFeB permanent magnet materials by sintered.adopt magnet field rotate scan to generate ultra high magnet field strength of radiation magnet field,skewed magnetization.have multi-pole OD/ID magnetization and uni-pole OD/ID magnetization two models.its maximumOD reach 300mm,minimium ID reach to 60mm,is the largest magnet ring in the world as far to know.work temperature 200â??. can be used in some large and high precision equipments and intruments. Custom different size of NdFeB magnet Ring NdFeB permanent magnet materies came out in 1980, Are widely used in motor,speaker,toys and electron etc. It's composed of Neodymium,Ferrite,Boron and other trace metals. Have ultra high magnet performance, maximum magnetic energy product (Bhmax) 10times of higher than Ferrite.have better mechnical performance,can be cut to different shapes and drilling. Its maximum work temperature reach up to 200â??.Due to its element include easy corrosion component , be demanded to different surface coating treatment according to using requirements.( such as Zincification,Nickel Plating,Au Plating, Epoxy Plating etc.) NdFeB is a alloy magnet composed of Neodymium,Fe,Boror and other trace metal elements. Is the strongest magnet rare earth magnet as far to found. Have very high magnetic energy product ( 8MGOe-55MGOe) and better Coercivity.its manufacturing process is mature, have strict quality assurance,perfect technical service and good performance cost ratio. We manufacturing and sale top quolity of NdFeB permanent magnet,include the largest size of NdFeB magnet ring in the world !!!
Product name : Custom Super Strong permanent 35H Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N38,N42,N42M,N48M,N42H,N45H,N35SH,N40SH,N33UH,N38EH Tolerance in size : +/-0.1 mm
