Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The patch cord can be used in interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths. Patch Cords include simplex, duplex and Multi-fibers assemblies.
OMCs Patch cables are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.
Connectors Standard:
SMA: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973.
Features
1.100% pre-terminated and tested in factory to ensure transfer performance.
2.Rapid configuration and networking, reduce installation time.
3.Supports 40G and 100G network applications.
4.Low insertion loss and added loss.
5.Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available.
6.High back loss, small volume, light weight.
7.End-face geometry and quality superior than IEC and Telcordia standards.
Product description of simplex tactical fiber optic cable for broadcast television communication
In the gyts cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around the strength member into a compact and circular cable core.The strength member would be covered with polyethylene (pe).The water-blocking materials are distributed into the interstices of the cable core.Then the cable is completed with a pe sheath.
?product features of simplex tactical fiber optic cable for broadcast television communication
1.Excellent mechanical and temperature performance.Critical protection to fibers.
2.Excellent ultraviolet prevention with pe sheath.
3.Excellent crush resistance and flexibility.
4.The following measures are taken to ensure the water blocking performance of the cable:
- single steel wire strength member used as the central strength member
- special water-blocking filling compound in the loose tube
- 100% cable core filling
Useú¦telecommunication networks; local area networks; video; multimedia; premise installations
Featureú¦integrated projective caps protect ferrules from dust and rule out any laser light emissions; integrated spring for a guaranteed closing of the protected cap; full ceramic ferrule; special ferrule perform for short polishing time; adjustable in 60 degree steps; excellent for high packing density
Typeú¦e2000 patch cord
Sizeú¦e2000/sm e2000/mm e2000/apc 0.9mm 3.0mm
Feature:
High tensile strength due to aramid strength member;
Good flame retardant properties;
Stable temperature performance;
Excellent stripability with tight buffered fiber;
High uniformity of geometrical characteristics.
Application:
Indoor riser level and plenum level cabling;
Fiber jumper or pigtail;
Indoor riser level and plenum level cabling;
Interconnections between instruments and communication Equipment
6541 Simplex Fiber Optic Patch Cable Suppliers
Short on time? Let Simplex Fiber Optic Patch Cable sellers contact you.
Low insertion loss.
High return loss.
High reliability and stability.
Excellent exchangeability and durability.
FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO etc. is available.
PC, UPC or APC polishing.
Single mode and multi-mode available.
Simplex, duplex or fan-out available.
;0.9, ;2.0, ;3.0 available.
Length: 1m, 1.5m, 2mor customized.
PVC, LSZH or hytrel available.
Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Description:
KSD simplex fiber optic cable comes with a single buffered fiber,aramid yarn strength members and low smoke zero halogen(LSZH)/PVC/TPU outer jacket.
Application :
1. Terminated with various types of connectors
2. As pigtail of communication equipment
3. Suitable for communication equipment served
Note:
1.Cables can be supplied with a range of single mode or multimode fibers.
2. The dimensions and raw materials can be designed according to the demand of the customers.
3. Standard Reel Length: 2000m/reel: other lengths available on request.
Application:
*Long Distance Trunk Network, Metropolitan Area Network, Access Network l
*DWDM System
*Fiber CATV Network, Fiber Data Network
*Optical Active Accessories
Features:
*Low insertion loss,
*High return loss
*Good repeatability and exchangeability
High Quality and Cost-effective 62.5/125um Multimode Fiber Patch Cable
The 62.5/125um multimode fiber patch cable meets RoHS compliant, and all cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling.
Sophenol also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc.
Why choose us?
1. Sophenol's fiber optic patch cords include differen terminations like LC, SC/APC, ST, E2000/APC, MU, VF45, FC, MTRJ, SC, MPO, MTP, FC/APC, ST/APC, LC/APC, E2000, DIN, D4, SMA, Escon, FDDI, etc.
2. Fiber optic patch cords are available for simplex, duplex and multicore with single mode 9/125 or multimode 50/125, 62.5/125, etc.
3. Various kinds of cable materials, PVC, Riser, Plenum, OFNR, OFNP, LSZH (LSOH), 10 Gig Aqua.
4. There are assemblies for simplex fiber optic patch cords, duplex fiber optic patch cords, multi fiber optic patch cords, and also ribbon fan out fiber optic patch cords and bundle fiber optic patch cords.
5. Typical fiber optic patch cords cable diameter can be 0.9mm, 2mm,or 3mm.?Sophenol also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc.
6. High Quality and Cost-effective 9/125um Singlemode Fiber Patch Cable
The 9/125um single mode fiber patch cable meets RoHS compliant.
7. All cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling.
Quality Standard:
·Fire retardant conformity with IEC 60332-3C standard
·No corrosive gas emissions IEC 60754-2 standard
·Low smoke zero halogen emissions with IEC 61034-2 standard
·Use international standard LC, SC, ST, FC connectors, support simplex or duplex
Features:
·100% pre-terminated and optically tested in factory to ensure transfer performance
·Meets or exceeds industry standards for return loss and insertion loss
·Manufactured using advanced automated assembly and polishing techniques
·Segmented boot for bend strain relief
·Use standard LC, SC, ST, FC connectors, support simplex or duplex
·Customized OEM products available
Custom Assembly:
·LC, SC, ST, FC, MTRJ, and other customize connectors available upon request
·PC, UPC, APC polishings available upon request
·0.99mm, 1.2mm, 1.6mm, 1.8mm, 2.0mm, and 3.0mm diameters also available upon request
·Yellow, Orange, aquamarine, violet or customized color jackets and boots available
·Length and fibers according to request, and Pigtail available
·Simplex, duplex, uniboot, zipcord jacket, or armoured cable, etc. all available
Sophenol fiber Optic Patch Pigtail 12 cores Fiber Optic Patch pigtail cableare with premium grade connectors and with typical 0.9 mm outer diameter cables. Simplex fiber pigtials and duplex fiber pigtails are available, with different cable color, cable diameter and jacket types optional. The most common is known as the fusion splice on pigtail , and the 12 fibers or 6 fibers multi color pigtail are easy to install and provide a premium quality fiber optic connection . We also offer individual single pigtails , discounted 6 packs , or 12 packs . also are 12 fiber or 6 fiber jacketed pigtails .
In this 12-pack, 12 strands of fiber are terminated on one end with LC or SC, ST, FC connectors. Connectors are ceramic with Ultra PC (UPC) finish.
Features:
·Low insertion loss and back reflection loss.
·Good exchangeability.
·Good durability.
·High temperature stability.
·Available in 4 fibers, 6 fibers, 8 fibers, 12 fibers, 24 fibers etc.
·Meets ISO9001, ROHS and Bell core GR 326-core standards
·Compliant to IEC, TIA/EIA, NTT and JIS specifications
Advantage :
·UL certificate makes the quality leve be the best.
·Warranty is lifetime.
·100% pass testing to assure a satisfactory performance.
·No any defectives or scratches on the ferrule surface.
·If there is any quality problem, we will make replacement immediately by free.
Scunoe is a professional fiber optical components manufacturer in China.
which is offering a best quality range of Fiber Optic patch cord .
Features: UPC?APC?Simplex / Duplex
Types: SC FC ST LC MTRJ E2000 MU MPO etc
Polishing : UPC , APC
Single Mode , Multi Mode , OM3(10G)
The dia of cable : 0.9mm, 2.0mm, 3.0mm
Multiple option of Optic Cable Core,Simplex,Twin cores,4 Cores,6 Cores,12 Cores,24 Cores, 48 Cores
Return Loss:=50dB(UPC/PC)=65dB(APC)
Insertion Loss : Single mode:PC=0.3dB, UPC=0.2dB, APC=0.2dB, MTRJ=0.5dB; Multi-mode:PC=0.3dB,
Repeatability:=0.2dB
Frequency of Usage:=1000Times
Applications
1. CATV
2. Metro
3. Test equipment
4. Active device termination
5. Local area networks (lans)
6. Premise installations
7. Telecommunication networks
8. Data processing networks
9. Wide area networks (wans)
Features
1. Low insertion loss and high reflection loss
2. Good durability
3. Compliant standard: IEC & ROHS
4. Good exchangeability
5. High temperature stability
6. Customization, I. E.: print company name on the connector and adapter.
200 piece per carton,
0.0587 cbm per carton
12kg per carton.
1> Long distance and local light transmission network
2> Data Transmission network, various kinds of testing and self-control system
3> Realizes connection of transmission of fiber optical
4> Simplex and duplex patch cords available
5> multimode and singlemode optional
6> Single mode fiber :8/125,8.3/125,8.7/125,9/125 um Multimode fiber :50/125 ,62.5/125 um
7> Connector: ST/SC/FC/LC/DIN/MTRJ/ D4/MU/E2000/SMA optional
8> made by advanced ceramic sleeve
9> PC, UPC, APC polishing
1> Long distance and local light transmission network
2> Data Transmission network, various kinds of testing and self-control system
3> Realizes connection of transmission of fiber optical
4> Simplex and duplex patch cords available
5> multimode and singlemode optional
6> Single mode fiber :8/125,8.3/125,8.7/125,9/125 um Multimode fiber :50/125 ,62.5/125 um
7> Connector: ST/SC/FC/LC/DIN/MTRJ/ D4/MU/E2000/SMA optional
8> made by advanced ceramic sleeve
9> PC, UPC, APC polishing
Insertion loss 0.1db
Return loss upc 50db
Repeatability 0.1db
Plugging times 1000
Operating wavelength 1310nm, 1550nm
Operating temperature 40 70
Storage temperature 40+ 80
Features:
Standards of iec, bellcore
Small volume, high density wiring
Upc end-face finishing
Low insertion loss
High return loss
Applications:
Communication networks
Device termination
Optical fiber test and measurement system
Lan
Industry and military applications
6541 Simplex Fiber Optic Patch Cable Suppliers
Short on time? Let Simplex Fiber Optic Patch Cable sellers contact you.
