Sec-Butyl Acetate(CAS:105-46-4)
CAS 105-46-4 HS code 2915390090 Packaging: 180kg/drum, 14.4tons per 20'FCL The application of Sec-butyl acetate is as below: 1. Used as coating solvent: Sec-butyl acetate is similar to n-butyl acetate and isobutyl acetate in solubility, and can be used as a substitute for n-butyl acetate and isobutyl acetate in coating formulations. 2. Sec-butyl acetate is widely used as a solvent for nitro paint, acrylic paint, polyurethane paint, polyester paint, amino paint, epoxy paint and other paints. 3. Used as a solvent in the manufacturing process of synthetic resins 4. Used as a solvent in the hardener manufacturing process 5. As an ink solvent, it can completely replace n-butyl acetate as a volatile solvent in printing ink 6. Used as a solvent in the adhesive manufacturing process 7. Used as diluent: Sec-butyl acetate is an ideal component with low cost and low toxicity in diluents such as tenna water and banana water. 8. Used as cleaning agent: sec-butyl acetate can be used to configure washing net water, washing mold water, washing plate 9. Used in pharmaceutical industry: sec-butyl acetate can be used as an extraction agent in the production process of antibiotics, hormones and vitamins; Due to its moderate volatilization rate, it has good skin permeability, and can also be used as a drug absorption promoting component 10. Used as fine chemical: sec-butyl acetate can be used as fine chemical extraction agent, such as extraction separation of ethanol-propanol, acrylic acid and other substances; It can also be used as azeotrope in acetic acid recovery and other processes. 11. Used in the cosmetic industry, such as in the manufacture of nail polish. 12. Used in fragrance industry: sec-butyl acetate has a special fruit smell, can be used as a fragrance 13. Sec-butyl acetate can also be used in the manufacturing process of rubber, safety glass, coated paper, solar lamp tube and other products.
Juniper oil is used in aromatherapy to help stimulate and strengthen the nerves and bolster the spirits in challenging situations, while helping to relieve urine retention. It is used for treating rheumatism, arthritis and gout, as well as cellulite, acne, dermatitis, blocked pores, psoriasis and weeping eczemas. The main chemical components of juniper oil are a-pinene, camphene, b-pinene, sabinene, myrcene, a-phellandrene, a-terpinene, y-terpinene, 1,4-cineole, b-phellandrene, p-cymene, terpinen-4-ol, bornyl acetate, cayophyllene and trace amounts of limonene, camphor, linalool, linalyl acetate, borneol and nerol.
Sweet marjoram: Origanum (O) hortensis (orMajoranahortensis). Potmarjoram: O.onites Wildmajoram: O.vulgare. Syrian majoram is called zatar Family: Labiatae or Lamiaceae (mint family). In Europe, marjoram was a traditional symbol of youth and romantic love. Used by Romans as an aphrodisiac, it was used to cast love spells and was worn at weddings as a sign of happiness during the middle Ages. Greeks who wore marjoram wreaths at weddings called it “joy of the mountains.” It was used to brew beer before hops was discovered, and flavored a wine called hippocras. A cousin of the oregano family, marjoram originated in Mediterranean regions and is now a commonly used spice in many parts of Europe. Called zatar in the Middle east and often mistaken for oregano, it is also a popular spicing in Eastern Europe. Origin and Varieties Marjoram is indigenous to northern Africa and southwest Asia. It is cultivated around the Mediterranean, in England, Central and Eastern Europe, South America, the United States, and India. Description Marjoram leaf is used fresh, as whole or chopped, and dried whole or broken, and ground. The flowering tops and seeds, which are not as strong as the leaves, are also used as flavorings. Sweet marjoram is a small and oval-shaped leaf. It is light green with a greyish tint. Marjoram is fresh, spicy, bitter, and slightly pungent with camphor like notes. It has the fragrant herbaceous and delicate, sweet aroma of thyme and sweet basil. Pot marjoram is bitter and less sweet. Chemical Components Sweet marjoram has 0.3% to 1% essential oil, mostly monoterpenes. It is yellowish to dark greenish brown in color. It mainly consists of cis-sabinene hydrate (8% to 40%), -terpinene (10%), a-terpinene (7.6%), linalyl acetate (2.2%), terpinen 4-ol (18% to 48%), myrcene (1.0%), linalool (9% to 39%), -cymene (3.2%), caryophyllene (2.6%), and a-terpineol (7.6%). Its flavor varies widely depending on its origins. The Indian and Turkish sweet marjorams have more d-linalool, caryophyllene, carvacrol, and eugenol. Its oleoresin is dark green, and 2.5 lb. are equivalent to 100 lb. of freshly ground marjoram. Marjoram contains calcium, iron, magnesium, phosphorus, potassium, sodium, vitamin A, vitamin C, and niacin. Culinary uses of Marjoram Marjoram is typically used in European cooking and is added to fish sauces, clam chowder, butter-based sauces, salads, tomato-based sauces, vinegar, mushroom sauces, and eggplant. In Germany, marjoram is called the “sausage herb” and is used with thyme and other spices in different types of sausages. It is usually added at the end of cooking to retain its delicate flavor or as a garnish. It goes well with vegetables including cabbages, potatoes, and beans. The seeds are used to flavor confectionary and meat products.
1 141-78-6 Ethyl acetate 2 79-20-9 Methyl Acetate 3 123-86-4 Butyl acetate 4 108-32-7 Propylene carbonate 5 75-12-7 Formamide 6 127-19-5 N,N-dimethylacetamide 7 872-50-4 N-methylpyrrolidin-2-one 8 26171-83-5 1,2-butanediol 9 504-63-2 1,3-Propanediol 10 26761-45-5 2,3-Epoxypropyl neodecanoate 11 57-55-6 Propylene Glycol 12 108-94-1 Cyclohexanone 13 95-47-6 o-xylene 14 2238-07-5 Diglycidyl ether 15 122-60-1 Phenyl glycidyl ether 16 34590-94-8 Dipropylene glycol monomethyl ether 17 110-54-3 Hexane 18 109-99-9 Tetrahydrofuran 19 75-09-2 Dichloromethane 20 110-82-7 Cyclohexane
1 108-78-1 Melamine 2 37640-57-6 Melamine cyanurate 3 63428-83-1 Polyamide 4 106-50-3 1,4-phenylenediamine 5 9002-89-5 Poly(vinyl alcohol) 6 105-60-2 �µ-caprolactam 7 10578-34-4 Stearyl benzoate 8 108-31-6 Maleic anhydride 9 108-05-4 Vinyl acetate 10 26264-06-2 Calcium dodecylbenzene sulfonate 11 111-69-3 Adiponitrile 12 924-42-5 N-Methylolacrylamide 13 100-20-9 Terephthaloyl Chloride 14 99-63-8 Isophthaloyl Chloride 15 1338-02-9 Copper naphthenate 16 6153-56-6 Oxalic acid dihydrate 17 79-10-7 Acrylic acid 18 75-01-4 Chloroethene 19 25190-06-1 Poly(butylene oxide) macromolecule 20 77-99-6 Trimethylol propane
1 117-81-7 Bis(2-ethylhexyl) phthalate 2 117-84-0 Di-n-octyl phthalate 3 85-69-8 Butyl 2-ethylhylhexyl phthalate 4 84-61-7 Dicyclohexyl phthalate 5 84-74-2 Dibutyl phthalate 6 84-69-5 Diisobutyl phthalate 7 131-11-3 Dimethyl phthalate 8 84-66-2 Diethyl phthalate 9 20548-62-3 Bis(7-methyloctyl) phthalate 10 68515-49-1 Diisodecyl phthalate 11 84-75-3 Di-n-hexyl phthalate 12 6422-86-2 Dioctyl terephthalate 13 137-89-3 Bis(2-ethylhexyl) isophthalate 14 123-79-5 Dioctyl adipate 15 122-62-3 Bis(2-ethylhexyl)sebacate 16 109-43-3 Bis(n-butyl)sebacate 17 512-56-1 Ttrimethyl phosphate 18 126-73-8 Tributyl phosphate 19 8013-07-8 Epoxidized soya bean oil 20 77-93-0 Triethyl citrate
1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane
S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
1. carbon black 2. rubber crumb 3. precipitated silica 4. silica quartz ore purity: 98% available, silica quartz powder/purity: 99.9% available, silica lumps purity: 99% available 5. calcium chloride powder 74% cacl2 92% cacl2 94% 6. magnesium chloride flake 7. sodium meta bisulphite (food grade 94 96%) 8. red onion as per your required size. 9. sodium acetate anhydrous 99% sodium acetate trihydrate crystal 99% 10.pet preform & fiber, bottle, flakes, 11.bopp tapes 12. capsicum or bell pepper, ready to eat foods, ready green paste like ginger, garlic paste.We also do logistic work for cif and we have 3rd party facilities like sgs on client chargeable base.
Aluminium tri-sec-butoxide Product Name: Aluminium tri-sec-butoxide CAS: 2269-22-9 MF: C12H27AlO3 MW: 246.32 EINECS: 218-871-2 Mol File: 2269-22-9.mol Chemical Properties Boiling point 40 C density 0.967 g/mL at 25 C(lit.) vapor pressure 23 hPa (195 C) refractive index 1.439 Fp 82 F storage temp. Flammables area solubility Miscible with alcohol, isopropyl alcohol and toluene. form Oily Liquid Specific Gravity 0.9671 color Light yellow Item Specifications Appearance Colorless transparent or light yellow liquid Purity % 99.99 Aluminum content % 10.2-12.5 Density ( g/cm3) 0.92-0.97
We can supply Acetic Acid Industrial Grade and Food Grade. Commodity:Acetic acid. Other name: Glacial acetic acid Molecular formula CH3COOH CAS:64-19-7 EC No.200-580-7 Introduction: Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition. the most important characteristic of this way are as following: mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way. Specifications: Apha color:
Commodity: Potassium Amyl Xanthate Product Nature Chemical name: Potassium Amyl Xanthate (PAX) Equivalent to : Z-6, AERO 350 xanthate Molecular Formula: C5H11OCSSK Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form Testing method: Lead acetate titration CAS Number: 2720-73-2 EINECS No.: 213-180-2 Use A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of CU/PB/NE AND PYRITE, Especially For The Floatation Of The Gold In Gold And Copper Mine.it Could Make Good Result In Copper And Lead Oxidized Ore.ofeen Used In Rough Selecting And Scavenging. Specifications Chemical components Specification 1 Specification 2 Purity 85% Min 90% Min Moisture & volatiles 10% Max 4% Max Free alkali 0.5% Max 0.2% Max Packing and Storage 120KG IRON DRUM,134 DRUMS PER 20'FCL,16.08MT; (OR 110-180KG IRON DRUM) 850KG Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner BAG) 25-50KG WOVEN BAG
Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
English name: Calcium Nitrite Molecular formula: Ca(NO2)2 Molecular weight: 132 CAS NO. 13780-06-8 HS CODE: 28341000 UN NO.: 2627 5.1 type oxidizing agent Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution. Specifications: Item Superior grade First grade Second grade Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90 Calcium Nitrate[Ca(NO3)2 as dry basis]%
Name: 2-hydroxy-6-naphthoic acid Alias: 2,6 acid; 2-naphthol-6-carboxylic acid; 6-hydroxy-2-naphthoic acid; 6-hydroxy-2-naphthoic acid CAS NOï¼?16712-64-4 Molecular formula: c11h7o3 Molecular weight: 187.172 Product quality standard: Appearance characte Light yellow powder Content 99% 2-naphtholâ?¤0.10% 2,3-acidâ?¤0.10% melting point243-245�°C Loss on dryingâ?¤0.30% heavy metalâ?¤20ppm Application: used in medicine, liquid crystal, paint, etc. Packing: 25kg / cardboard barrel, or according to customer requirements
4-Hydroxybenzoic acid Chemical Name:4-Hydroxybenzoic acid Trade Name:p-oxybenzoic acid Molecular Formula:C7H6O3 Molecular Weight:138.12 CAS No.:99-96-7 Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone, slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46 Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate Specification Item Specification Polymer Grade Technical Grade Appearance white crystal powder white crystal powder Purity(on dry base) % 99.6 99.0 Melting Point 214-217 212-216 Odor odorless odorless Solubility Clear and transparent clear and transparent Loss on Drying % 0.20 0.50 Color(Pt-Co) 10 40 Ash % 0.02 0.15 Sulfate(SO42-) 0.01 0.05 Chloride(Cl-) % 0.005 0.02 Phe% 0.01 0.10 Salicylic Acid % 0.02 0.10 4-Hydroxyisophthalic Acid(HIPA) ppm 500 / Insolubles in Metha ppm 50 / Potassium(K+) ppm 5 / Sodium (Na+) ppm 5 / Iron (Fe) ppm 5 / Ca2++Mg2+ppm 5 /
Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months
Commodity: Calcium carbide Molecular formula:CaC2 Molecule Weight: 64.10 H.S code:28491000 CAS: 75-20-7 UN NO.1402 HAZARD CLASS: 4.3 Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide. Appearance: Grey, black solid, purple when its purity is more than 90%. Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm Package: Net in 100kg or 50kg new iron drums with nitrogen. Specification: GB10665-2004 Specification Superfine Grade First Grade Second Grade Gas yield(L/kg)L/kg 305 295-305 285-295 PH3 content in acetylene (PH3%) 0.06 0.08 0.08 H2S content in acetylene (H2S%) 0.1 0.1 0.1 Loading weight in 1 x 20fcl:22.5mt