SCW Shaft-mounted Arc Cylindrical Worm Reducer 1. Product description SCW series shaft-mounted arc cylindrical worm reducer can get a large transmission ratio, its load-carrying capacity is much higher than that of staggered helical gear mechanism worm transmission is equivalent to helical transmission, which is multi-tooth meshing transmission, so the transmission is stable, the noise is small and self-locking. Technical parameters: Power: 0.12 kw-160 kw Angular moment: 50 N.m-28000 N.m Transmission rate:5-63 2. Characteristics 1). Large transmission ratio 2). Load-carrying capacity 3). Smooth transmission, low noise and self-locking 3. Application area Mainly used in metallurgy, mining, lifting, transportation, chemical industry, construction and other mechanical equipment deceleration drive. 4. Operation conditionsï¼? 1.The worm shaft speed for the reducer is no more than 1500r/min,ambient temperature -40â??~+40â?? 2.when the ambient temperature is below 0â??,before starting the lube must be heated up to above 0â?? 3.The reducer can rotate both CCW and CW. 5. Model SCWU Series: SCWU 63-SCWU 100 SCWU 125-SCWU 315 SCWS Series: SCWS 63-SCWS 100 SCWS 125-SCWS 315 SCWO Series: SCWO 63-SCWO 100 SCWO 125-SCWO 315 6. Type SCWU type-shaft-mounted arc cylindrical worm reducer with worm under worm gear SCWS type--shaft-mounted arc cylindrical worm reducer with worm at side of worm gear SCWO type-shaft-mounted arc cylindrical worm reducer with worm above worm gear 7. After-sale service 1).Quick and safe delivery . 2).One-year warranty period. 3).The photos and films of production process will be reported to you. 4).The service hotline is on duty 24 hours and responds within 24 hours. 8. FAQ 1.Q:What about your warranty for your gear reducer with motor? A:One year,but except man-made destroyed. 2.Q:How about your payment terms? A:TT,total payment by T/T in advance. 3.Q:How about your packing? A:Small size:standard export packing(carton and plled). Big size:Fumigation wood carton or non-wood material carton. 4.Q:What information should be given,if I buy gearboxes from you? A:Rated power,gearboxes ratio,input speed,mounting position,more details,better
Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes
YAMAHA OUTBOARD ENGINES HS Code 840820 PRICE = US$2,000/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION As well as its indestructible (almost) composite shaft, the great little M18 outboard is tough in every other sense too - from its hard-working, permanent magnet 12-Volt motor and its hardwearing, weed-resistant power propeller right down as far as its hard-to-damage casing. In short, it goes where you go. With no drama. Electric-Drive Technical specs Amp Draw 42 Voltage 12 Mount Feature Lever lock Max Thrust (kg) 18.2 Speeds (FWD/REV) 5 FWD/3 REV Digital Maximizer False Shaft Length 914 mm Battery Meter False Control Telescoping Tiller
It has a beautiful natural honey golden hue, but more importantly it is famous for being highly resistant to rot, pests (bugs, termites and worms), and fungi in both land and marine environments. Teak is the premier choice for any requirement in the marine industry, from decks and interior work, to docks. Teak is naturally water-resistant and physically very strong and durable. It is not prone to significant expansion or contraction with humidity changes. The oils in teak are what make it weather-resistant and it requires basically no care when left outside. Its high silica content gives it non-skid properties as well as durability. This makes teak a great choice in damp environments, or in areas where slipping could be very dangerous. Application: Ship and boatbuilding, veneer, furniture, exterior construction, carving, turnings, and other small wood objects. Below are the popular sizes we are offering: Teak Round Logs Teak round logs are a premium choice for those in the market for lumber and timber products. The round logs are the result of a peeling process that removes the bark and exposes the wood's natural grain. Teak Square Logs Teak square logs are created through a process that involves cutting the round logs into square pieces, exposing the natural grain of the wood. This process results in a beautiful and smooth surface that is ready for further processing. Teak Cut to Size Timber Teak Cut to size timber has been precisely cut to the desired dimensions and specifications of a customer. The benefit of cut to size timber is that it eliminates the need for the customer to do any additional cutting or shaping, saving time and effort. Origin: Burma, Ecuador, India, Panama, Costa Rica, Nigeria, Ghana, Brazil, etc. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2
A worm shaft, or a worm gear as it is often referred to, is a long cylindrical type of gear that provides a surface for ball bearings to ride on.Space Saving Applications - Worm gears are also used in the manufacturing and packaging industries. They are used in packaging equipment, small machinery, and conveyors. They are ideal for these types of equipment because they have fewer gear sets which achieve high gear ratios Material: Ms(all Grade), Ss(all Grade). Bronze, And Etc
Description by Manufacturer ENGINE Engine Type V6 Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm) Displacement 186 CID (3,046 cc) DIMENSIONS Shaft Length 25 in. (635 mm) Weight 528 lb. (240 kg) GENERAL Propshaft Horsepower 175 HP (131 kW) Full Throttle Operating Range 5000-6000 RPM Gear Ratio / Shift F-N-R Cooling Water-cooled with thermostat & pressure-controlled The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel. SPECIFICATIONS HP: 175 HP (131 kW) Engine type: V6 Displacement: 186 CID (3,046 cc) Displacement: 3.0 L Full throttle: 5000-6000 RPM Shaft length: 25 in. (635 mm) Gearcase ratio: 2.08:1 Dry weight *Lightest model available: 528 lbs (240 kg) Bore and stroke: 3.63 x 3.00 in (921 x 762 mm) Fuel system: 2-stage Direct Fuel Injection (DFI) Cooling system: Water-cooled with thermostat & pressure-controlled Gear shift: F-N-R Exhaust system: Through prop KEY FEATURES Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation. Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting. Commercial patrol boat models meet EPA emissions standards. Cylinder heads designed specifically for combusting diesel fuel. High performance cylinder liners for maximum horsepower and optimal engine running quality. Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
CAPT manufactures the full line of single-start and multi-start worm gears and shafts, from M1-M5 to meet European market demand and DP16-DP3 to meet US market demand. These worm gears and shafts are produced with high quality cast iron, carbon steel or bronze. Advanced equipment and strict production technique ensures CAPT worm gears and shafts are trusted domestically and worldwide for their dependability and quality.
Hollow shaft worm gear
For Skew-List Gear Box Worm Wheel : Material PB-2 Worm Shaft : Material EN-24, Heat-Treated 56-58 HRc
We have manufacturing all types of Turned Parts.
WD TYPE Central distance: 030-110 Gear Ratio: 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120~1800 RATIO: 1:300-3200 HORSE POWER: 0.1KW-0.75KW IEC 56~132 B5/B14 NEMA 48C~215TC F90 SQUARE FLAGE WITH BRAKE OR MANUAL RELEASE BRAKE HOLLOW SHAFT WORM GEAR REDUCER (SINGLE SHAFT) WS TYPE Central distance: 030-110 Gear Ratio: 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120~18000 Motor Flame Size: IEC B5/B14, NEMA 56C-112C
SS Soaking Agitators Chemical socking from Jeya Engineering has developed various systems to thaw frozen IQF, and both block shrimp and then soak in the same system. During and after the thawing, the shrimp can be, if desired, "soaked". After the thawing, additives are added to the water, the shrimp can absorb these additives for a certain period of time. During this soaking the fluid surrounding the product stays in motion. After washing the headless materials it must be soaked in water with additives. For this purpose Soaking Agitator is used. This soaking agitator has a vertical rotating shaft in which leafs are mounted. This shaft is rotated at the desired speed. Tubs are positioned at the bottom of the soaking agitator. The rotary motion enables the headless materials to be completely agitated and soaked. We manufacture two types of soaking agitator by taking type of operation into account. Fixed type Movable type Some of the features of SS Soaking Agitators are : Reduces labor involvement. Nylon with PU coated swivel wheel not only improves aesthetics but also its mobility. Fixed type agitators are supplied along with carefully designed Hexagonal soaking tank. User friendly and Occupies lesser space.
MOUNTED BULL HORNS COW TEXAS LONGHORN TAXIDERMY MOQ: 100 Piece(s) Type: 40 inches Long Horn Material: Cow Horn And Ox Horn Application: Decoration Color: Black and White/ Natural Supply Type: Manufacturer, Supplier Product Details MOQ: 100 Piece(s) Type: Horn Material: Steer Horn /Cow Horn And Ox Horn Application: Use For Decoration Color: Black and White/ Natural Style: Natural A natural textured version of our Extra Large Viking drinking horn. 20 long from rim to tip with semi polished exterior walls to highlight the natural finish and texture of horn. All of our Viking style drinking horns include a matching stand, brass trimmed lip and food safe seal on the interior walls 20 in length and holds over 40oz+ of liquid. Semi-polished finish, natural exterior finish Inside walls are smooth and sealed to hold liquid Brass rim trim around lip and stand included Additional Information Payment Terms: L/C, D/P, T/T Packaging Details: We use bubbles wraps and carton boxes. Also, packaging is done as per customer's request and order volume. Colour: White or Cream Pair: 40 Inches up Packaging: Bulk, Crates and PP Bags Feature: Free from Worms, Cleaned Minimum Order Quantity: 1 Container. 1x20ft Production Capacity: 8 Mt Minimum per Month Delivery Time: 60 Days after Receipt of L/C Description: Paired XXL Cow Horns: Large Price Available on request
Real Cow Skull, natural cattle skull with polished horns , for art DIY and wall decor or education. Handmade Materials: bone, horn Width: 48 centimetres, minimum Height: 52 centimetres, minimum Depth: 30 centimetres Professionally processed, cleaned, whitened, degreased Cow skull, with polished horns. Fully processed, bleached. For home or restaurant decoration, art, or education Width: 48 cm (with horns) Length: 50 cm (skull) Horn: 27 cm (arc length) Perfect whitened bone. Economy international shipping. Your item will be carefully packed, using bubble wrap and corrugated fiberboard and shipped within 3-7 business days. Worldwide delivery takes 7-15 days. Always come undamaged. Long 100-120mmx20-25mm, Length 31-36 Because of the size, the horns can be detached for shipment. Putting the horns back on the skull is simple. All parts are color coded and pre-drilled for easy installation. We are selling very nice original African Natural steer skull with long horns. The lengths of horns are from 13 up to 42 long. Some expand over 60 inches tip to tip. The skull and horn are in good shape. All are select grade with nasal plates. They will be very great for mounting in your home, restaurant, club, and patio or on your fence. These are truly magnificent and fantastic decorating items. SIZES Skull Watusi Horn: Skull with horn 10- 17 Skull with horn 31-33 Skull with horn 18- 21 Skull with horn 34- 37 Skull with horn 22 - 23 Skull with horn 37 39 Skull with horn 24 - 26 Skull with horn 40+ Description: Steer Skull/Cow Horn with Polished Long Horn: Small Available on request Steer Skull/Cow Horn with Polished Long Horn: Large Price Available on request
TF - Parallel Shaft Helical Geared Motor This series is compact and easy to mount. Flange-, foot- and hollow shaft-mounted versions, or combinations of these mounting options are available. These gearboxes are of a modular design. Output shaft and flange can be mounted to standard hollow-shaft gearboxes without modification of the gearbox. The housing has mounting points on both sides, allowing mounting from either side. The hollow-shaft gearboxes have new mounting options also for the input side. Input possibilities are standard (IEC B5 or B14), direct coupled or with solid input shaft. A combination with other gearbox types is possible with minimum change. In applications where efficiency and strength are important, hollow-shaft gearboxes are preferred to worm gearboxes. Hollow-shaft gearboxes can withstand higher overhung loads than other gearbox types.
We have manufacturing all types of Control Shafts.
We have manufacturing all types of Shafts.
We have manufacturing all types of Shafts.
We have manufacturing all types of Turned Parts.
We have manufacturing all types of Turned Parts.
