Pure Acenaphthene Molecular Formula: C12H10 CAS NO. :83-32-9 EINECS:201-469-6 UN: 3077 9/PG 3 Main application: 1. Dye, plant growth hormone, germicide, insecticide production 2. Synthetic dyes, polyester resins, polyester fibers, can also be used to make fluorescent pigments, pharmaceuticals, insecticides, etc. 3. Dehydrogenation of acenaphthene to produce acenaphthene resin.
Acenaphthene(CAS:83-32-9)
1 141-78-6 Ethyl acetate 2 79-20-9 Methyl Acetate 3 123-86-4 Butyl acetate 4 108-32-7 Propylene carbonate 5 75-12-7 Formamide 6 127-19-5 N,N-dimethylacetamide 7 872-50-4 N-methylpyrrolidin-2-one 8 26171-83-5 1,2-butanediol 9 504-63-2 1,3-Propanediol 10 26761-45-5 2,3-Epoxypropyl neodecanoate 11 57-55-6 Propylene Glycol 12 108-94-1 Cyclohexanone 13 95-47-6 o-xylene 14 2238-07-5 Diglycidyl ether 15 122-60-1 Phenyl glycidyl ether 16 34590-94-8 Dipropylene glycol monomethyl ether 17 110-54-3 Hexane 18 109-99-9 Tetrahydrofuran 19 75-09-2 Dichloromethane 20 110-82-7 Cyclohexane
1 108-78-1 Melamine 2 37640-57-6 Melamine cyanurate 3 63428-83-1 Polyamide 4 106-50-3 1,4-phenylenediamine 5 9002-89-5 Poly(vinyl alcohol) 6 105-60-2 �µ-caprolactam 7 10578-34-4 Stearyl benzoate 8 108-31-6 Maleic anhydride 9 108-05-4 Vinyl acetate 10 26264-06-2 Calcium dodecylbenzene sulfonate 11 111-69-3 Adiponitrile 12 924-42-5 N-Methylolacrylamide 13 100-20-9 Terephthaloyl Chloride 14 99-63-8 Isophthaloyl Chloride 15 1338-02-9 Copper naphthenate 16 6153-56-6 Oxalic acid dihydrate 17 79-10-7 Acrylic acid 18 75-01-4 Chloroethene 19 25190-06-1 Poly(butylene oxide) macromolecule 20 77-99-6 Trimethylol propane
1 63148-62-9 Silicone oil 2 77-92-9 Citric acid 3 9003-05-8 Polyacrylamide 4 7664-39-3 Hydrogen fluoride 5 9000-11-7 Carboxymethyl cellulose 6 7757-82-6 Sodium sulfate 7 68-04-2 Sodium citrate 8 7664-38-2 Phosphoric acid 9 1310-73-2 Sodium hydroxide 10 497-19-8 Sodium carbonate 11 139-33-3 EDTA disodium 12 67-63-0 Isopropanol 13 25322-68-3 Polyethylene Glycol 14 144-55-8 Sodium bicarbonate 15 4404-43-7 Fluorescent Brightener 28 16 7758-29-4 Sodium tripolyphosphate 17 7601-54-9 Trisodium phosphate 18 532-32-1 Sodium benzoate 19 5329-14-6 Sulfamic acid 20 142-91-6 Isopropyl palmitate 21 7782-99-2 Sulfurous Acid 22 9014-01-1 Subtilisin (Compound proteinase) 23 1344-09-8 Sodium silicate 24 6834-92-0 Sodium metasilicate 25 7720-78-7 Ferrous sulfate
1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate
Use: It is used as an intermediate in the production of pesticides, ceftiofur and organic chemicals. It is mainly used in the synthesis of sulfadiazine drugs and the production of pesticides, fungicides and herbicides. It is also used in the production of new pesticides, such as dicofone, dicofone, kecaojin, etc .
Aluminium tri-sec-butoxide Product Name: Aluminium tri-sec-butoxide CAS: 2269-22-9 MF: C12H27AlO3 MW: 246.32 EINECS: 218-871-2 Mol File: 2269-22-9.mol Chemical Properties Boiling point 40 C density 0.967 g/mL at 25 C(lit.) vapor pressure 23 hPa (195 C) refractive index 1.439 Fp 82 F storage temp. Flammables area solubility Miscible with alcohol, isopropyl alcohol and toluene. form Oily Liquid Specific Gravity 0.9671 color Light yellow Item Specifications Appearance Colorless transparent or light yellow liquid Purity % 99.99 Aluminum content % 10.2-12.5 Density ( g/cm3) 0.92-0.97
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
Commodity:Avobenzone CAS No. 70356-09-1 Molecular Formula C20H22O3 Molecular Weigh 310.39 EINEC No. 274-581-6 Specification Quality standard: USP36 Appearance Off-white powder Assay 95.0-105.0% Melting range 81.0~86.0 Impurities Any individual impurity: 3.0% The sum of all of the impurities: 4.5% Loss on drying 0.5% Packaging and storage: 1kg/aluminum foil bag. 25kg/barrel, pharmaceutical packaging barrel. Sealed, stored in dark, with a shelf life of 2 years. Reference dosage: The hygiene standards for cosmetics stipulate that the maximum amount added shall not exceed 5%, and the general dosage is 1-4%. Usage: Sunscreen agent-1789 is the most effective fat soluble UVA filter and is a safe and effective UVA sunscreen approved by the US FDA for sale on the counter. It can effectively block UVA, thereby increasing the SPF value of sunscreen products. It can improve the efficacy of sunscreen products when used in combination with UVB filters, and BL-200 has the best effect when used in combination with octyl methoxycinnamate. BL-200 can increase its stability in the product. It has an extremely effective protective and repairing effect on human skin. Application: This product is soluble in oil and can be formulated into a cream using the usual method. However, the product turns red when it encounters metal ions, so other components such as formula water should not introduce metal ions. The equipment should be made of pure stainless steel, and an appropriate amount of EDTA-2Na should be added to the formula water phase to chelate with metal ions.
Cocoa Powder CAS No.83-67-0, is a powder of cocoa beans manufactured through fermentation, available as Fine, free flowing brown powder used as food supplements to improve flavoring. Cocoa powder is also available in Alkalized form as Alkalized Cocoa powder. As an experienced Cocoa Powder manufacturer and supplier, we has been supplying and exporting Cocoa Powder for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Cocoa Powder Specification Natural Cocoa Powder 10%-12% ITEM STANDARD Appearance Fine, free flowing brown powder Colour of powder Brown to dark brown Flavour Characteristic cocoa flavour Fat content (%) 10 12 Moisture (%) 5 Ash (%) 8 Fineness through 200 mesh (%) > 99 pH 5.2 5.8 Total plate count (cfu/g) 5000 Mould count (cfu/g) 100 Yeast count (cfu/g) 50 Coliforms Not detected Shigella Not detected Pathogenic bacteria Not detected
Important Note: We can also do OEM/ Private Labeling Port of Loading: Semarang, Indonesia Baby Diapers FLUFFY Tape (Velcro) Type. Available Variants: 1. FTS10 (S Size. 1 Box = 10 Bag x 30 Pcs) 2. FTS 20 (S Size. 1 Box = 20 Bag x 15 Pcs) 3. FTS 40 (S Size. 1 Box = 40 Bag x 6 Pcs) 4. FTM 9 (M Size. 1 Box = 9 Bag x 30 Pcs) 5. FTM 18 (M Size. 1 Box = 18 Bag x 15 Pcs) 6. FTM 36 (M Size. 1 Box = 36 Bag x 6 Pcs) 7. FTL 8 (L Size. 1 Box = 8 Bag x 30 Pcs) 8. FTL 32 (L Size. 1 Box = 32 Bag x 6 Pcs) 8. FTX 7 (XL Size. 1 Box = 7 Bag x 30 Pcs) 9. FTX 14 (XL Size. 1 Box = 14 Bag x 16 Pcs) Baby Diapers FLUFFY Pants Type. Available Variants: 1. FPS 20 (S Size. 1 Box = 20 Bag x 12 Pcs) 2. FPM 8 (M Size. 1 Box = 8 Bag x 24 Pcs) 3. FPM 18 (M Size. 1 Box = 18 Bag x 12 Pcs) 4. FPM 34 (M Size. 1 Box = 34 Bag x 6 Pcs) 5. FPL 7 (M Size. 1 Box = 7 Bag x 24 Pcs) 6. FPL 18 (L Size. 1 Box = 18 Bag x 12 Pcs) 7. FPL 30 (L Size. 1 Box = 30 Bag x 6 Pcs) 8. FPX 16 (L Size. 1 Box = 16 Bag x 12 Pcs) 9. FPX 26 (L Size. 1 Box = 26 Bag x 8 Pcs)
We can supply met coal (hi and med vol) as requested, need to start with 30,000 tons per month and can work up to 110,000 tons per month; specs as outlined below: Tonnage-25-30k tons per month Spec: Dry-Basis Ash-8-9.5 Sulfur-1-1.1 BTU-13,000-14,000 Vol- 26 to 32(M-H) FSI- 9 Tonnage-1st Month-25-30k 2ndMonth-35-40k & 40k per month for the remainder of contract. Spec: Dry-Basis Ash-7.5-8.5 Sulfur-0.5% BTU-13,500-14000 Vol-32-35(H) FSI-7-8.5 Three year contract, fixed price for first two years; adjusted to market in 3rd year, or as negotiated. This is good coal and with a two year fixed price contract it should be very attractive. Buyer can inspect coal on site and contract directly with producer if required. Producer has 20+ years in business and sells to some of the largest US power and steel companies.
Specifications for Desiccated Coconut: - Moisture : 3% max - FFA (Free fatty acid as lauric) : 0.5% max - 2 types: High fat: 62% min, Low Fat: 32-34% - Size: Fine: 1-3mm, medium grade: 3-5mm - Color: Natural white color of coconut. - Free from Salmonella and Ecoli. - Packing : 50/25/10 kgs or 7 kgs 9 kgs on PP bag. - Minimum Order Size and Packgaing details: 14Mt/cont 20ft
Inosine, CAS No.58-63-9, is a nucleoside manufactured through fermentation, available as white crystalline Powder. Inosine is widely used in nutraceutical, nutritional supplement, and food additive applications. Inosine is an amino acid that is a kind of coenzyme drug widely used in the medicine and the food industry. Inosine is also used as an important feed stimulant or combine with other amino acids in some species of farmed fish. As an experienced Inosine manufacturer and supplier, we has been supplying and exporting Inosine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Inosine powder Specification ITEM STANDARD Appearance White crystalline Powder Identification Positive in No.1, 2, 3 Test State of solution transmittance Clear and colorless ot less then 98% Loss on drying 1.0% Heavy metals(Pb) 10ppm Assay 98.0~102.0% Residue on ignition 0.2% Other Related compounds of nucleic acid Chromatographically not detectable Arsenic(As2O3) 1ppm PH 4.8-5.8
Ethyl Vanillin, CAS No.121-32-4, Chemical Formula C9H10O3, manufacturing process from chemical synthesis. Ethyl Vanillin is one of the important edible food flavors and fragrances and the raw material in food additive industry. It has full-bodied and lasting fragrance of Vanilla Beans and is 3-4 times as fragrant as Vanillin. Ethyl Vanillin is used in food, sweets, chocolate, candy, ice cream, drinks and cosmetics as fragrance fixative and additive. As an experienced Ethyl Vanillin manufacturer and supplier, we has been supplying and exporting Ethyl Vanillin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Vanillin food grade Specification ITEM STANDARD Appearance Fine white to slightly yellow crystal Odor Characteristic of vanilla, stronger than vanilla Solubility (25 ) 1 gram completely dissolves in 2ml 95% ethanol, and make clear solution Purity (HPLC) 99% Loss on Drying 0.5% Melting Point () 76.0- 78.0 Arsenic (As) 3 mg/kg Mercury (Hg) 1 mg/kg Total Heavy Metals (as Pb) 10 mg/kg Residue of Ignition 0.05%
L-Isoleucine powder, CAS No.73-32-5, an isomer of L-Leucine, essential amino acid manufactured by fermentation from carbohydrate sources. No raw materials of animal origin are used in the production process. It is one of the branched chain amino acids (L-isoleucine, L-valine, and L-leucine). As an experienced L-Isoleucine manufacturer and supplier, we has been supplying and exporting L-Isoleucine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Isoleucine Specification ITEM STANDARD Appearance White crystals or crystalline Powder Specific rotation +38.6-+41.5 PH 5.5-7.0 Loss on drying â?¤0.3% Heavy metals(Pb)20ppm Content 98.5~101.0% Iron(Fe) 20ppm Arsenic(As2O3) 1ppm Lead10ppm Other Amino Acids Chromatographically not detectable Residue on ignition (Sulfated) 0.2% Organic Volatile impurities
