Chemical name: Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide CAS No.:75980-60-8 Molecular formular:C22H21O2P Molecular weight:348.37 Appearance: Pale yellow crystal powder Purity, %: 99.0min. (HPLC) Melting point,degree:91.0-94.0 Volatility, %: 0.2max. Acid value (mgKOH/g): 0.5max. TPO is an efficient free radical photoinitiator with absorption in a long wavelength range.�?� Its effective absorption peak is 350-400nm and it always absorbs about 420nm. Its absorption peak is longer than that of the conventional initiator. After irradiation, two free radicals, benzoyl and phosphatidyl, can be formed, which can initiate polymerization. It is a photoinitiator for curing styrene-based unsaturated polyesters and acrylic resins. Its absorption in the long-wave region of the UV spectrum can fully cure even white paints and surfaces pigmented with TiO2. Such coatings are characterized by particularly low yellowing. TPO can also be used to cure clear coatings and is particularly suitable when low-odor products are desired. Recommended applications: screen inks white coatings, flexo inks wood coatings, overprint varnishes printing plates etc.The thermal stability of TPO is excellent. It is heated to 180 without chemical reaction and has good storage stability.
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Product Name: photoinitiator TPO / photocure TPO CAS No.: 75980-60-8 Molecular Weight: 349 Appearance: Yellow crystalline powder Assay (HPLC): 98.0% min Uses: PI-TPO is photo-initiator for curing styrene-based unsaturated polyesters and acrylic resins. It also provides high reactivity and depth cure. Such coating are characterized by particular low yellowing.PI TPO can be used to cure clear coating as well.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Nano Nano Candy Available Flavour variants Orange Peel, Starfruit, Pineapple Salad, Tamarind, Soursop, Guava, Grape, Dalgona 10x30x12,5gr, Orange Peel 60x20x50gr, Orange Peel Jar 7x30, Assorted Jar 7x25, Orange Peel Jar 14x30, Salsa Lime, Salsa Mango, Salsa Orange, Salsa Strawberry, Salsa Mint sachet packaging 10x10x15gr, Salsa Gift Pack 12x130gr, Nought Original, Strawberry, Chocolate, Coffee Tiramisu 6x20, Milky Chocolate Sachet, Milky Vanilla Sachet, Milky Strawberry Sachet, Milky Cookies Cream Sachet, Milky Taro Sachet 6x30, Chew Orange Pell, Chewy Blueberry Lime, Chewy Mango, Chewy Soursop 6x20, Orange Peel Pouch 8 item, Tamarind Pouch 8 item 12x10, Grape Joy C Pouch 15 Item, Orange Joy C 15 item contain 60 pack. Product is Manufactured by PT Konimex Pharmaceutical Laboratories.
Vanish Fabric Stain Remover Product of Reckitt Benckiser Indonesia Available Variant: 1. Vanish Pouch 150 ml (Pink, White) 2. Vanish Bottle 180 ml (Pink) 3. Vanish Bottle 500 ml (Pink, White) 4. Vanish Bottle 1000 ml (Pink) 5. Vanish Pouch 450 ml (Pink, White) 6. Vanish Powder 400 gr (Pink) 7. Vanish Pouch 120 gr (Pink) 8. Vanish Renceng 30 gr (Renceng) 9. Vanish Renceng 60 ml (Pink, White) 10. Vanish Bottle 800 ml (Pink) Shipping from Semarang, Indonesia
important Note: We can also do OEM/ Private Labeling Port of Loading: Semarang, Indonesia Baby Diapers Mamamia Tape (Velcro) Type. Available Variants: 1. MTS10 (S Size. 1 Box = 10 Bag x 24 Pcs) 2. MTS 20 (S Size. 1 Box = 20 Bag x 12 Pcs) 3. MTM 10 (M Size. 1 Box = 10 Bag x 24 Pcs) 4. MTM 20 (M Size. 1 Box = 20 Bag x 12 Pcs) 5. MTM 40 (M Size. 1 Box = 40 Bag x 6 Pcs) 6. MTL 10 (L Size. 1 Box = 10 Bag x 24 Pcs) 7. MTL 20 (S Size. 1 Box = 20 Bag x 12 Pcs) 8. MTL 36 (S Size. 1 Box = 36 Bag x 6 Pcs) 9. MTX 10 (XL Size. 1 Box = 10 Bag x 24 Pcs) 10. MTX 20 (XL Size. 1 Box = 20 Bag x 12 Pcs) Baby Diapers Mamamia Pants Type. Available Variants: 1. MPS20 (S Size. 1 Box = 20 Bag x 12 Pcs) 2. MPM9 (M Size. 1 Box = 9 Bag x 16 Pcs) 3. MPM 20 (M Size. 1 Box = 20 Bag x 12 Pcs) 4. MPM 34 (M Size. 1 Box = 34 Bag x 6 Pcs) 5. MPM 60 (M Size. 1 Box = 60 Bag x 4 Pcs) 6. MPL 8 (L Size. 1 Box = 8 Bag x 16 Pcs) 7. MPL 20 (L Size. 1 Box = 20 Bag x 12 Pcs) 8. MPL 30 (L Size. 1 Box = 30 Bag x 6 Pcs) 9. MPL 54 (L Size. 1 Box = 54 Bag x 4 Pcs) 10. MPX 18 (XL Size. 1 Box = 18 Bag x 12 Pcs) 11. MPX 26 (XL Size. 1 Box = 26 Bag x 8 Pcs)
English name: Calcium Nitrite Molecular formula: Ca(NO2)2 Molecular weight: 132 CAS NO. 13780-06-8 HS CODE: 28341000 UN NO.: 2627 5.1 type oxidizing agent Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution. Specifications: Item Superior grade First grade Second grade Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90 Calcium Nitrate[Ca(NO3)2 as dry basis]%
[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected  3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15  - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01
Commodity : Soda Ash Light / Dense Molecular formula:na2co3 Molecule weight:105.99 H.S Code:28362000 Cas: 497-19-8 Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air. Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry. Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers Specifications standard : gb210.1-2004 Items : specification First grade : specification Second grade Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min Chloride content(as nacl) %0.7% max0.9% max Iron content(as fe in dry base) /%0.003% max0.0035% max Sulphate content(as so4 in dry base) /%0.03% max0.03% max Water insoluble matter /%0.03% max0.03% max Loss on ignition a/ %0.5% max0.5% max
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant. General Information Product Name Potassium Monopersulfate compound CAS 70693-62-8 Chemical formula 2KHSO5 KHSO4 K2SO4 Molecular weight 614.7 Specification Appearance White, free flowing granule Available Oxygen, % 4.5 KHSO5,  % 42.8 Loss on Drying  % 0.15 Bulk Density, g/L 0.80 pH (10g/L,25 C) 2.0 .4 Sieve Residue on 75 m test sieve, % 90.0 Packaging Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements. Storage Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Product Name: Sodium permanganate Use level: Industrial Content: 40 (%) CAS Number: 10101-50-5 Molecular formula:NaMnO4 Molecular Weight: 141.93 Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate. Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on. Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place. Quality Standard: Â Items index Sodium permanganate (NaMnO4) Content / (%) 40 Water-insoluble content / (%) 0.01 Potassium (K) content / (%) 0.22 pH value 6 ?8 Density / (g/cm3) 1.36 1.39 Chloride (Cl) content / (%) 0.02
Trichloroisocyanuric acid (TCCA) 90% Min intro: 1. Molecular formula: C3N3O3C13 Molecular Weight: 232.44 CAS: 87-90-1 HS NO:29336922 UN NO:2468 2. Structural formula: 3. Uses: 1) water treatment: it can be used to disinfect drink water and water in swimming pool, algae-removing in circulating water. 2) Disinfection: It can be used in disinfecting dinner, food, and dishes, or used in the prophylactic disinfection of home, hotel and public place; hygiene and disease control of hospital; or used in the disinfection of silk worm, animals, birds and fish 3) Other: It can be used in anti-shrinkage finishing of wool, textile bleaching, antimoth of paper and chlorinated agent of rubber. 4. Technical Index: Appearance: white powder/granular Available chlorine: 90%Min PH (1% Aq. Solution): 2.7-3.3 Moisture: 0.5% Max Granular Size: 8-30mesh or 20-60mesh Package: 25kg/50kg plastic drum, 50kg fiber drum. 5. Product: According to the requirements of production from customers.
Commodity: Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base and external processing of flake caustic, solid caustic soda, granular caustic soda, which provide ideal condition and environment for domestic and foreign trade. Typical Specifications: Indexes Purity NaCl Na2CO3 Fe2O3 99 99 0.15 0.9 0.003 98 98 0.15 0.5 0.002 96 96 2.8 0.85 0.005 Used as a raw material in the manufacture of soaps ,detergent, textiles and paper ,and likewise ,in water softening and treatment, drilling mud in oil field, refining petroleum products, and washing beer and soft drink bottles, in food and drug industry ,it is used as acidity regulator, alkali, and so on. Packing :Flake/pearl:25kg/plastic woven bag with PE inner Solid :200kg/ iron drum Loading weight in 1 x 20fcl: 27mt
Commodity: Ammonium nitrate porous prills Molecular formula: NH4NO3 Molecule Weight: 80 CAS: 6484-52-2 UN:1942 Hazardous class:5.1 Commodity: Ammonium nitrate porous prills 1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye. 2. Purpose: Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields. 3. Product specifications: Specifications: Appearance white granule Particle size 0.5-2.5mm NH4NO3 >99.5% N >34% Oil absorption > 8% Moisture < 0.2% PH >4
Commodity: Sodium bicarbonate Synonym: Baking Soda; Bicarbonate of soda; Sodium acid carbonate; Monosodium carbonate; Sodium hydrogen International CHEMTREC , carbonate; Carbonic acid monosodium salt Molecular formula:NaHCO3 Molecule Weight:84.01 H.S code:28363000 CAS:144-55-8 Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air. Quality Standard Item The National Standard The Total Alkalinity Content(NaHCO3)% 99.0, 100.5 Loss on Dring% 0.20 PH Value(10g/1) Solution, 8.6 Arsentic Content% 0.0001 Heavy Metal Content, 0.0005 Ammonium Salt pass Clearness pass Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc. Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag. (We can meet with all your demands according with your need.)
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
Origin: Vietnam Color: natural. Moisture: 8% max. Thickness: 30 - 60 mm. Length: 10-12m; Width: 1-1.5m. 100% natural, well finishing, smooth surface.
The place of Origin: Vietnam Color: natural. Moisture: 8% max. Thickness: 30 - 60 mm. Length: 10-12m; Width: 1-1.5m. 100% natural, well finishing, smooth surface. Quantity capacity: 5*40ft container/ month. Packaging: each roll is wrapped by straps.
Bamboo cups are made of 100% natural, biodegradable bamboo. Bamboo cups do not use chemicals, safe for users. Specifications: - Origin: Vietnam - Material: 100% bamboo - Color: Natural bamboo color - Diameter: 5-10cm - Height: 8-20cm - Capacity: 60-200ml - MOQ: 500pcs - Packing: In carton box
