Find Verified Pgr%3A Brassinolide Suppliers, Manufacturers and Wholesalers

Brassinolide, also known as brassinolide, Yifengsu or Tianfengsu, is a new type of sterol endogenous plant hormone. It can significantly increase the vegetative growth of plants and promote fertilization at very low concentrations. Brassinolide is internationally recognized as the most active, highly efficient, broad-spectrum and non-toxic plant growth regulator. It has the dual effects of promoting plant cell division and prolongation, promoting root development, enhancing photosynthesis, increasing the chlorophyll content of crops, promoting the effective absorption of fertilizers by crops, and assisting the healthy growth of the disadvantaged parts of crops. Promote root growth, strengthen seedlings, protect flowers and fruits; Enhance the cold resistance, drought resistance, salt-alkali resistance and other stress resistance of crops, and significantly reduce the occurrence of diseases; It can significantly alleviate the occurrence of pesticide damage. After the occurrence of pesticide damage, its application can detoxify, enable crops to recover growth quickly, and eliminate disease spots. Brassinolide can also significantly increase yield and improve the quality of crops.

Brassinolide, also known as brassinolide, Yifengsu or Tianfengsu, is a new type of sterol endogenous plant hormone. It can significantly increase the vegetative growth of plants and promote fertilization at very low concentrations. Brassinolide is internationally recognized as the most active, highly efficient, broad-spectrum and non-toxic plant growth regulator. It has the dual effects of promoting plant cell division and prolongation, promoting root development, enhancing photosynthesis, increasing the chlorophyll content of crops, promoting the effective absorption of fertilizers by crops, and assisting the healthy growth of the disadvantaged parts of crops. Promote root growth, strengthen seedlings, protect flowers and fruits; Enhance the cold resistance, drought resistance, salt-alkali resistance and other stress resistance of crops, and significantly reduce the occurrence of diseases; It can significantly alleviate the occurrence of pesticide damage. After the occurrence of pesticide damage, its application can detoxify, enable crops to recover growth quickly, and eliminate disease spots. Brassinolide can also significantly increase yield and improve the quality of crops.

FLORA-3A is our vibrant new range of colour spectrum, inspired by the boundless hues of blooming flowers and the graceful yet powerful flow of rivers. This line celebrates natureâ??s paletteâ??delivering richness, depth, and fluid elegance in every stroke.

Absolute Coverage | Accel Drying | Astral Sheen


Advanced Chemistry: Incorporates novel functional groups into the core chemical backbone for enhanced durability.

First-in-Class Colour Spectrum: Delivers unmatched vibrancy and consistency across all shades.

Ultra-Fast Drying: Speeds up application time without compromising finish quality.

Wide Coverage: Optimized formulation ensures more surface area covered per unit.

Durable Sheen: Long-lasting, high-gloss finish that withstands time and environment

Automotive Excellence: Engineered specifically to enhance and protect car surfaces with elegance and resilience.

Product Name: Frozen Yellowfin Tuna Saku CO/ TS Treatment
Scientific Name: Thunnus albacares
Origin of source: Vietnam
Specification: CO/ TS/ Vitamin Treated and Natural
Size: Customer Requirements
Packaging:
IVP 10 lbs/carton
Customer requirements

Part No
2107

Soap Plodder Machine No. L-3A

Size: Standard
Raw Material Used: Mild Steel & Cast Iron.
For forming of Toilet Soap.
Soap Strips is formed in the Toilet Soap Milling Machine.
Thin Soap Strips is fed to the Toilet Soap Plodder Machine.
Press worm strongly compresses & forwards the soap strips into the conical
forepart through the heating device.
A heating device is for maintaining proper temperature for the fed material.
Temperature is maintained with the Electric Thermostat device.
Toilet Soap Plodder Machine compresses the Soap Strips and extrudes it in the form of bars.
The bars extruded from the Die are of the desired shape and width, than after is cut into required length. Changeable Die.
Single Worm (L-3A Worm Dia. 12.7).
Refining Screen Barrel is provided for refining and homogenizing the soap.
Cooling jacket is provided at the plodder cylinder.
Easy and smooth in operation.
Minimum working space.
Appropriate working height.
Production capacity is 500 kg/8 hrs. approx.
Machine works on 5HP. 3Phase 1440 rpm Motor.

Soap Plodder Machine No. L-3A

Product : Sant Cast Steel Y Type Strainer
Type of Pattern : Y Type
Body Material cum standard : CCS (ASTM A-216 Gr. WCB)
Product Description : Bolted Cover Type
Trim : AISI-304, Screen 1.2mm dia perforation
End Details : Flanges as per BS10 Table F/Class-150

Testing & Certification
Body Test Pressure : 40kg/cm Hyd.
Maximum Working Pressure : 20kg/cm
Maximum Working Temperature : 400 C

Our Works Test Certificate is furnished with every supply.

Output: 84V 3A; Input:90 -230Vac, 50 ~ 60Hz
Provide 1* Fuse and 1* US/UK/EU/AU standard power cable Aluminum Shell, LED Indicator light, Beautiful and Durable and cooling faster Overvoltage Protection, Over Current Protection, Short Circuit Protection, Reverse Protection

Model: 29.4V 3A Li-ion battery charger constant current and constant voltage charger
Input: 100V~240V, 50~60Hz, 1.6A (Works Worldwide)
Output: 29.4V 3A
Power Cord/DC: US/EU/UK/AU DC5.5*2.5mm/5.5*2.1mm/XRL/3PIN and more
Outlet: 2/3 Prong
Size: 88mm x 34mm x27mm (L x W x H)
Packing: Brown box( 50pcs/ctn); 49*39*34CM(L x W x H) for master carton size
Material for PCB & Housing: ABS+PC+Fireproofing material
Delivery Date: Within 2-3 working days after confirm the payment
Warranty: 12 months
Approved: CE,FCC,RoHS, SAA, PSE
Protection: SCP,OVP,OCP,OTP
Test: Temperature test; Vibration test; Drop-Test;Over charging and discharging test
Line Regulation: +/-5%
Load Regulation +/-5%
Normal Operating Temperature and Humidity: Operating Temperature: 0°C to 45°C
Humidity: 10% to 90%RH
Packaging 50/pcs Carton

Hydraulic top link with shock absorber mod. 3A 120 complete with Walterscheid quick release for tractors with powers between 300 and 400Hp

IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK

The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting

The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties.

The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment.

The installation requires no special components and no additional spaces are required

We remind you that this accessory brings the following ADVANTAGES:


+ Comfort: protects the operator from blows from jumping implements during transport

+ Efficiency: increases front axle grip

+ Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings

+ Safety: improves the traction of the tractor while driving on the road by absorbing shocks

+ Productivity: Reduced travel times on the road and in the field

- Maintenance: important reduction in maintenance costs of the tractor and of the operating machines� due to less wear on the components

Hydraulic top link with shock absorber mod. 3A 105 complete with Walterscheid quick release for tractors with powers between 200 and 300Hp

The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting

IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK

The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties.

The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment.

The installation requires no special components and no additional spaces are required

We remind you that this accessory brings the following ADVANTAGES:


+ Comfort: protects the operator from blows from jumping implements during transport

+ Efficiency: increases front axle grip

+ Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings

+ Safety: improves the traction of the tractor while driving on the road by absorbing shocks

+ Productivity: Reduced travel times on the road and in the field

- Maintenance: important reduction in maintenance costs of the tractor and of the operating machines  due to less wear on the components

Hydraulic top link with shock absorber Antonioni mod. 3A 070 complete with quick release for tractors with power up to 150Hp

INTERNATIONAL PATENT PENDING

Hydraulic top link with shock absorber of 70mm bore complete with quick hitch

FEATURES Innovative Hydraulic Top Link with integrated gas accumulator, complete with damping device
With high quality Waltersheid quick hitch or available with fork attachment long and short version
Interchangeable with standard models Installation requires no special components and no additional clearances are required

Hydraulic top link with shock absorber Antonioni mod. 3A 070 complete with quick release for tractors with power from 150Hp to 200Hp

INTERNATIONAL PATENT PENDING

Hydraulic top link with shock absorber of 70mm bore complete with quick hitch

FEATURES Innovative Hydraulic Top Link with integrated gas accumulator, complete with damping device
With high quality Waltersheid quick hitch or available with fork attachment long and short version
Interchangeable with standard models Installation requires no special components and no additional clearances are required

Product : Cast Iron Horizontal Check Valve
Product Standard : BS:5153
Type of Pattern : Straight Type
Pressure / Class / Rating : PN 16
Body Material cum Standard : Cast Iron IBR 86 to 93 Gr.A
Description : Bolted Cover
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI-410
End Details : Flanges as per DIN 2533 RF (PN 16) Undrilled

Testing & Certification
Rating : PN 16
Body Test Pressure : 26Kg/cm g (Hyd.)
Seat Test Pressure : 16Kg/cm g (Hyd.)
Working Pressure : Max BOP 13Kg/cm g at 220 C Steam

Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)

Product : Bronze Horizontal Lift Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in cover
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Screwed female BSP Taper threads to BS 21

Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)

Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)

JUXON Juxon010-100E is a 100W 42V/54.6V 3A Li-ion battery charger platform for 36V and 48V light electric vehicle battery packs. The compact ABS enclosure, universal AC input and protected CC/CV charging profile make it suitable for e-bike, scooter and mobility replacement projects. Output setting, connector, cable length and label can be matched to the battery pack specification.

Official JUXON product page:
https://www.juxonpower.com/en/products/juxon010-100e/?utm_source=go4worldbusiness&utm_medium=product&utm_campaign=juxon010_100e

Send charger matching details:
https://www.juxonpower.com/en/contact/?utm_source=go4worldbusiness&utm_medium=product&utm_campaign=juxon010_100e

For charger matching, please provide battery voltage, connector photo, battery chemistry, charging current requirement and estimated order quantity.

Dried Squid.
MOQ 1000kgs.
Moisture 10% max.
Sizes:
SSA: 7-10pcs/kg.
SA: 12-14pcs/kg.
1A: 17-20pcs/kg.
2A: 27-30pcs/kg.
3A: 37-40pcs/kg.
3As: 47-50pcs/kg.
4A: 60-70pcs/kg.
5A: 90-130pcs/kg.
Packing: 10kgs carton (PE liner), 11tons/20ft

Product : SANT Forged Steel Horizontal Lift Check Valve
Product Standard : BS 5352 / API 602
Pressure / Class / Rating : Class 800
Body Material cum Standard : FCS (A105)
Description : Bolted Bonnet
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Fastener : Alloy Steel (Gr.B7/2H)
Gasket : Spiral Wound SS-304 (CAF/Graphite filled)
End Details : Screwed Female NPT Threads


Testing & Certification
Body Test Pressure : 207 Bar g (3000 Psig) Hyd.
Seat Test Pressure : 152 Bar g (2200 Psig) Hyd. & 6.9 Bar g (100 Psig) Air
Maximum Working Temperature : 425 C
Test Certificate in Form lll-C as per IBR is furnished with every supply
(APS Marines & Logistics)

Output: 67.2V 3A; Input:90 -230Vac, 50 ~ 60Hz
Provide 1* Fuse and 1* US/UK/EU/AU standard power cable
Aluminum Shell, LED Indicator light, Beautiful and Durable and cooling faster
Overvoltage Protection, Over Current Protection, Short Circuit Protection, Reverse Protection