Bottle Water Plant is Skid Mounted System and can be Installed at anywhere with water Inlet. This system consists of Raw water Pump Is Take Water From Water Tank And Give to Sand Filter And Carbon Filter, Pressure Sand Filter Is Removes Turbidity, Activated Carbon Filter Removes Smell & Color, Antiscalant Dosing Worked For The Reverse Osmosis System So With The Help Of That Membranes Not Chock Up., Micron Cartage Filter Is Used For The Remove Heavy Particles Which Comes From The Filters., HP pump Is Provide Pressure To Membranes and R.O. Membranes Is Remove Heavy TDS. Hardness, Alkalinity, Iron, Etc. with Pressure Vessels and sophisticated Instruments with Programmed Control Logic for its ful.
Application: Suitable for producing PET plastic containers and bottles from 100-2000ml. It is widely used to produce the carbonated drink bottle, drinking water bottle, oil bottle, cosmetics bottle, wide-mouth bottle etc. Features: 1) Food-grade stainless steel 304 for the parts in contact with product, meet the food industry standard. 2) PLC automatic control with world famous brands like Mitsubishi, Siemens, Omron, etc., good stability. 3) Easy machine operation by using the touch screen like Weinview or Siemens. 4) Standard machine parts, easy to do maintenance work, greatly reduce the maintenance costs and improve work efficiency. 5) Adopting rigid construction sealing, which is not easy to damage and with good leakproofness. 6) Emergency stop and other safety features provide unparallel operator safety. 7) All parts and service plans available.
We are manufacturer of Blow Molding Machine. Features: Automatic Control Panel Included Can be customized
Pet stretch blow molding machine Molder: Number of cavities: 2 Cavity stroke: 114.3 mm Clamping stroke: 130 mm Stretching stroke: 350 mm Clamping system: hydraulic toggle Container: Max. container volume: 2000 ml Neck diameter: 15~45 mm Max. container diameter: 90 mm Max. container height: 350 mm Number of heating zones: 40 Dimension: Overall height: 2315 mm Overall length: 2800 mm Overall width: 1800 mm Dead weight: 4200 kg
We can support all types semi-automatic and full-automatic bottle blowing machine , which can blowing 10ml to 20l pet bottle, please contact me if you interested, i will give you good price.
Blow molding machine.
Using PET material, KINTL-5G could blow extra-large bottles of 5 gallon volume. Those bottles are mainly used to contain pure drinking water for office and family uses. As the market of pure drinking water is expanding rapidly those years, the inquiry of extra-large bottles is also keeping on increasing. Our KINTL-5G is designed to produce high quality water drums at very competitive prices. It uses high quality electrical and pneumatic parts imported from Germany and Japan to ensure stable and effective work. The complete production line for making 5 Gallon PET bottle manufactured by our factory includes: 1.)Main blow molding machine 1 unit 2.)Preform Preheater 1 unit 3.)Voltage stabilizer ( 50KW) 1 set 4.)Chilling type air dryer(with built in rear/front filter) 1 set 5.)Low pressure air compressor 12.5Kg/0.8M3 1 set 6.)High pressure air compressor 30Kg/0.7M3 1 set 7.)Blow mould for 5 Gallon bottle 1 cavity 1 unit Product Feature MAIN BLOWING MACHINE SIEMENS PLC controller. FESTO hydraulic elements, valves and pipes. MISHUBICH VVVF motor. The mould clamping system design is adopted by the advanced toggled lock design producing strong clamping force. The mould thickness can be adjusted by gear-turned belt automatically. On the blowing base of machine, an automatic moving device is assembled. PREHEATER The preheater is an infrared heater. When the preforms being heated in the infrared heater by circulation movement, they can also be rotating independently. Inside the preheater, there are 22 holding heads for the preforms and 12 infrared pipes providing 12 zones of different heating temperature. It ensures accurate temperature at each zone pipe without fluetuation, guarantee high percentage of perfect end products Product specification / models Total power of the whole system in kw. 22.5kw Total power consumed by pet blowing machine in kw. 3 Power consumed by the preheater in kw. 7.2kw/220v Total power consumed by the two air compressors (high pressure and low pressure). 7.5kwx2 Production capacity 400bph for 5l bottle 90bph for 5 gallon bottle
1. The design of equipment is logical, easily operation. 2. The automatic level is very high, the wage is very little. 3. Using famous imported hydraulic, electrical, sealing parts, the trouble is low. 4. No matter what the products outside or inside, they can get the best guarantee, the good products rate can be above 99%.
Full - automatic pet bottle stretch blow molding machine is the most stable two-step automatic stretch blow molding machine. It has one to four cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
2 & 4 Cavity Fully Automatic PET Stretch Blow Molding Machine
Condition New Application Bottle Plastic processed Pet Blow moulding typeStretch blow moulding Automatic Yes Place of origin Jiangsu, china (mainland) Brand name Lvhuan Model number Isb50-4s Voltage 220v or 380v Power(w) 34kw Dimension(l*w*h) 3750*1150*2800 Weight 4t Certification Ce Warranty 1 year of warranty After-sales service providedEngineers available to service machinery overseas Injection station high 470mm Blow station high 415mm Standard number of cavity 1-6 cavity Max. Theoretical capacity 180 cm3 Tank capacity 300l Operation air consumption 0. 5m3/min Cooling tower water 5t/h No. Of zones for machine 4 No. Of zones for mold 5+12+6 Stretch force 1.9kn Dimension(l*w*h) 3750*1150*2800 Weight 4t
CM-12 blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and it is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm. Its maximize product capacity can reach 1000pcs/h. 1. Perfect function with economic investment. 2. Small size and compact construction with no space waste. 3. Easy to operate and maintain, operation by one person. 4. Saving power and uneasy to worn out, Adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system. Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, - Key Specifications/Special Features: * Widely used to produce various shape of plastic from PET * With neck finish: 15 to 200mm * Perfect function with economic investment * Small size and compact construction with no space waste * Easy to operate and maintain ,operation by one person * Saving power and uneasy to worn out * Adopting new double crank four bars to lock mould, the cross fixed * Providing high pressure blowing system * Container: o Product material: PET, PP, PE o Volume L: 10-25L (3-5 gallon) o Theoretical output: 90 to 180 pieces/h o Preform inner diameter: 15 to 200mm * Moulding: o Max mould plate dimensions (L x W): 420 x 500mm o Max.mould thickness: 40 mm o Clamping force: 330KN o Mould opening stroke: 38mm * Machine size and weight: o Main machine (L x W x H): 218 x 77 x 196cm o Main machine weight 1,000kg o Heater (L x W x H): 237 x 68 x 165cm o Heater weight: 380kg * Power: 40kW Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
Cm-a4 automatic pet bottle blow molding machine ooling water: 150l Min size ( lxwxh): 1908x1858x1920mm Weight: 3600kg Auxiliary equipment : preform unscrambler is equipped as standard
PET containers for the beverage industry such as water bottles, CSD bottles, HR bottles, Aseptic bottles, etc. Various containers for the other industry, e.g. edible oil, condiment, cosmetics, protection products, and pharmaceutical, etc. The brands of blow molding machines such as Sidel, Krones, KHS, Tech-long, Newamstar, Sacmi, Sipa, ASB and AOKI, etc.
ANGELHZ-120 fully automatic stretch blow moulding machine produce bottle form 5 L to 25 L. Neck finish from 15 mm to 200 mm. It is suitable to produce thermo containers of PET, PC material. Feeding system carries the performs automatically. Precise design of heater ensures even heating for the performs. It is especially used to produce 5-gallon large volume containers. Specification: Container volume: 5-6L (2 cav) 10-1L (1 cav) Theoretical output: 5 gallon: 120pcs/hr; 5L 700pcs/hr Max. Length of bottle: 450mm Bottle diameter: 350mm Mould plate dimension: 520 x 600mm Mould thickness: 400mm Clamping force: 300kN High press compressor: 1.2/30Mpa Low press compressor: 1.6/10Mpa Power: 20kW Voltage/frequency: 220-380V / 50-60Hz Machine dimension: 2.60 x 1.90 x 1.95m Main body weight: 2.8T
CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Its maximize product capacity can reach 1600pcs/h. 1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally. 2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. 3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. 4. The machine can be operated in the step-by-step mode and the semi-auto mode. 5. The machine is small with low investment, easy and safe to operate. Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available. - Key Specifications/Special Features: * Suitable for producing PET plastic containers and bottles from 10 to 2,000mL * Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles * Adopts double crank to adjust mold, heavy locking mold, stable and fast * Adopts infrared oven to heat perform, perform rotated and heated equally * Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow * Can provide sufficient and steady high pressure for blowing large irregular shaped bottles * Equipped with muffler and oiling system to lubricate mechanical part of machine * Can be operated in step-by-step mode and semi-auto mode * Small with low investment, easy and safe to operate * Container: o Material: PET, PP and PE o Volume: 0.1 to 2L o Theoretical output 1,200 to 1,600 o Preform length: 15 to 350mm o Preform inner diameter: ? 5 to 38mm * Molding: o Max mold plate dimension (L x W): 350 x 380mm o Max mold thickness: 180mm o Clamping force: 45kN o Mold opening stroke: 16mm * Machine size and weight: o Main machine (L x W x H): 160 x 60 x 161cm o Main machine weight: 500kg o Heater (L x W x H): 187 x 63 x 145cm o Heater weight: 250kg * Power 17.5kW Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
CM-A4 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 4000pcs/h. 1. Reasonable design, full automatic control, save power and labor. Adopt high quality components. 2. Feeding system carries the preforms by robot automatically. 3. Infrared oven heater adopts the quartz lamp to heat the PET tube. 4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits. Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available. - Key Specifications/Special Features: * Material: PET PP PE * Pneumatic part: o Valve SMC o Cylinder SMC * Electric part: o PLC LG/Mitsubishi o Operation system LG/Hitech o Relay OMRON o Infrared thermometer o America raytek * Electrical components adopts CE, UL, CCC approved international advanced high-tech product * Output Depend on bottle design: 3,200 to 4,000 pieces/h * Body diameter: 20 to 100mm * Height: 50 to 350mm * Neck diameter: 15 to 38mm * Mould cavity four cavity * Mould thickness: 240mm * Mould 500 x 500mm * Electrical source power 380/220V 3Phase 50/60Hz * Power: 49kW * Really use power 14kW * Air source: o LP air compressor 1.6m3/min 1.0MPa, one set (7.5kW) o HP air compressor 1.0m3/min 3.0Mpa two set (each set 11kW) o Air dryer 2.0m3/min 3.0MPa 1set o Cooling water :Cooling water 15L/min o Size (L x W x H): 1,908 x 1,858 x 1,920mm o Weight: 3,600kg o Auxiliary equipment * Pre-form unscrambler is equipped: o Size (L x W x H): 276 x 106 x 186mm o Weight: 250kg Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 2000pcs/h. 1. Reasonable design, full automatic control, save power and labor. Adopt high quality Components. 2. Feeding system carries the preforms by robot automatically. 3. Infrared oven heater adopts the quartz lamp to heat the PET tube. 4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits. Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available. - Key Specifications/Special Features: * Material: PET, PP, PE * Pneumatic part: o Valve SMC o Cylinder SMC * Electric part: o PLC LG/Mitsubishi o Operation system LG/Hitech o Relay OMRON o Infrared thermometer o America raytek * Electrical components adopts CE, UL, CCC approved international advanced high-tech product * Output depend on bottle design: 1,800 to 2,000 * Body diameter: 20 to 100mm * Height: 50 to 350mm * Neck diameter: 15 to 38mm * Mold cavity to cavity * Mold thickness: 240mm * Mold 500 x 500mm * Electrical source power 380/220V 3 Phase 50/60Hz * Power: 25kW * Really use power: 6kW * Air source: o LP air compressor 1.0m3 1.0MPa 1 set (7.5kW) o HP air compressor 0.73 3.0MPa 2 set (each set 11kW) o Air dryer 1.03 3.0MPa 1 set o Cooling water: cooling water 10L o Size (L x W x H): 1,908 x 1,280 x 1,920mm o Weight: 2,000kg o Auxiliary equipment o Pre-form unscrambler is equipped: * Size (L x W x H): 276 x 106 x 186mm * Weight: 250kg Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Its maximize product capacity can reach 1000pcs/h. 1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally. 2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. 3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. 4. The machine can be operated in the step-by-step mode and the semi-auto mode. 5. The machine is small with low investment, easy and safe to operate. Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available. - Key Specifications/Special Features: * Heat-resistant bottle blow-molding machine * Suitable for producing PET plastic containers and bottles from 10-2,000ml * Used to produce carbonated bottle, mineral water pesticide bottle, oil bottle cosmetics wide mouth bottle and hot fill bottle * Adopts double crank to adjust mold, heavy locking mold, stable and fast * Adopts infrared oven to heat perform, perform rotated and heated equally * Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow * Can provide sufficient and steady high pressure for blowing large irregular shaped bottles * Equipped with muffler and oiling system to lubricate mechanical part of machine * Can be operated in step-by-step mode and semi-auto mode * Small with low investment, easy and safe to operate * Can produce PET bottles which can resist high temperature, such like 92 deg. C * For traditional juice and other liquid food packing * Container: o Material: PET, PP and PE o Volume: 0.1-2L o Theoretical output: 600 to 800 pieces/H o Preform length: 15 to 350mm o Preform inner diameter: ? 5 to 38mm * Molding: o Maximum mold plate dimension (L x W): 350 x 380mm o Maximum mold thickness: 180mm o Clamping force: 45kN o Mold opening stroke: 16mm * Machine size and weight: o Main machine (L x W x H): 160 x 60 x 161cm o Main machine weight: 500kg o Heater (L x W x H): 187 x 63 x 145cm o Heater weight: 250kg * Power: 24.8kW Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
Stretch blow molding machine
