More SuperHard PCD cutting tool blanks in the size of 5�¼mã??10�¼m and 25�¼m can be used in super-fine processing and fine. They are applicable to the processing of non-metal materials as wood, ceramic,intensified planks and non-farrous material as copper and aluminum. We can supply all kinds of PCD cutting tool blanks that diameter can reach 62mm. PCD Cutting Tool Blanks Application Recommendation * W5 fine grain size(excellent surface finish) Characters: Average grain size: 5�¼m, High diamond content over90%, Laser cutting ,wire EDM cutting Applications:Aluminum, Brass/Copper,Precious metals, Wood composites,Plastic * W10 medium grain size (excellent resistance, good surface finish) Characters:Average grain size: 10�¼m, High diamond content over 90%, Laser cutting ,wire EDM cutting Applications:ï¼?14% Si/Al alloys, Copper alloys, Graphite and graphite composites, Green ceramics and carbides * W25 coarse grain size(Long life, extremely high wear resistance) Characters:Average grain size: 25�¼m, High diamond contentover 90%, Laser cutting ,wire EDM cutting.
PCD cutting tool blanks, PCD blanks Size: 62mm PCD blanks, 58mm PCD blanks, 51mm PCD blanks, 48mm PCD blanks, etc. Type: Triangle, Cylindrical, Square, Flake, etc. Application: PCD blanks are applicable to the processing of non-metal materials as wood, ceramic, intensified planks and non-ferrous material as copper and aluminum. Details More SuperHard PCD cutting tool blanks in the size of 5μmã??10μm and 25μm can be used in super-fine processing and fine. They are applicable to the processing of non-metal materials as wood, ceramic, intensified planks and non-ferrous material as copper and aluminum. We can supply all kinds of PCD cutting tool blanks that diameter can reach 62mm PCD Cutting Tool Blanks Application Recommendation * W5 fine grain size (excellent surface finish) Characters: Average grain size: 5μm, High diamond content over90%, Laser cutting, wire EDM cutting Applications: Aluminum, Brass/Copper, Precious metals, Wood composites, Plastic * W10 medium grain size (excellent resistance, good surface finish) Characters: Average grain size: 10μm, High diamond content over 90%, Laser cutting, wire EDM cutting Applications:ï¼?14% Si/Al alloys, Copper alloys, Graphite and graphite composites, Green ceramics and carbides * W25 coarse grain size (Long life, extremely high wear resistance) Characters: Average grain size: 25μm, High diamond content over 90%, Laser cutting, wire EDM cutting Applications:14% Si/Al alloys, metal matrix composites, Bi-metals(aluminum/ castiron), sintered ceramics and carbides
Name: PCD Cutting Tool Blanks Brief IntroductionMore SuperHard PCD Cutting Tool Blanks In The Size Of 5μm�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. Type: Triangle, Cylindrical, Square, Flake, Etc Details More SuperHard PCD Cutting Tool Blanks In The Size Of 5μm�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. They Are Applicable To The Processing Of Non-Metal Materials As Wood, Ceramics,Intensified Planks And Non-Farrous Material As Copper And Aluminum. We Can Supply All Kinds Of PCD Cutting Tool Blanks That Diameter Can Reach 58mm . Model Product No Ang Diameter (Mm) Thickness (Mm) MoreD30 360 30 1.6, 2.0, 3.2 MoreD42 360 42 1.6, 2.0, 3.2 MoreD48 360 48 1.6, 2.0, 3.2 MoreD51 360 51 1.6, 2.0, 3.2 MoreD58 360 58 1.6, 2.0, 3.2 Note:The Products Can Be Manufactured Per Customer Request As Non-Standard Shapes Such As Rectangular, Square, Triangle, Rhombus, Sector And So On. Advantages: 1. High hardness, abrasion resistance and impact resistance 2. High speed, good surface finish, long life and high efficiency 3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl 4. Gauge pads have tungsten carbide inserts for maximum wear resistance 5. The diamond layer with thickness over 1 mm increases abrasion resistance of PDC cutter Please don't hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools, welcome to consult and choose at any time
PCD disc CBN tip cutting tools blanks diamond tool segment PCBN is made by high pressure high temperature sintering of cubic boron nitride with a binder phase, and there are mainly tow groups of binders, namely metal binder and ceramic binder. CBN and diamond are very similar in crystal structure,chemical bond and lattice parameters,thus they perform quite similar hardness and strength. In cutting applications, thewear resistance of PCBN exceeds 50 times that of tungsten carbide. If you need any products, do not hesitate to contact PCD PCD(Polycrystalline Diamond)is a synthesized, extremely tough, intergroup mass of randomly orientated diamond particles in a metal matrix. It is produced by sintering together selected diamond particles at high pressure and temperature. 51mm diameter round shape PCD cutting tools PCD blanks 1. The introduction of PCD cutting tool blanks(PCD cutter/ PCD blanks) : PCD cutting tool blanks are composed of diamond powder and tungsten carbide in high temperature and pressure. They have the high hardness and abrasion resistance of nature diamond, and combined with the toughness that of tungsten carbide 2.The Application of PCD cutting tool blanks(PCD cutter/ PCD blanks): Suitable for the machining of non-ferrous metal and alloys, such as aluminum, copper, zinc, as well as wood, ceramics, rubber, plastic, fibre, etc. 3. Some useful tips of PCD cutting tool blanks(PCD cutter/ PCD blanks): The normal shape is round, also could be cut into rectangles, triangles, sectors, etc. as request. The main controlling factor determining PCD grade(the work piece surface finish and the abrasion resistance(tool life) )is the grain size. It is generally accepted that abrasion resistance increases with increased grain size, and the work piece surface finish are increases with the decreasing grain size. The medium grain size PCD blanks are generally used for their ability to strike a balance between good abrasion resistance (tool life) and maintaining good work piece surface finish. The PCD blank is thermally stable up to 750°C, so its better to be welded with silver solder in a very short time, otherwise will cause carbonizing reaction or crack.
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
We purchase stems from farmers and suppliers as shown in pictures and we then cut them and clean them of foreign matter and we then bag them. We can provide with the following certificates, 1. Processing certificate. 2. SGS certificate. 3. Origin Certificate. 4. Phytosanitary Certificate. 5. USD 3.42/kg CIF China
We supply attractive variety qualitative range of Toilet and Bathroom accessories. Features of our Shower door hinges · CNC machined precision pivot pins · Dimension 90mmx 55mm (varies from hinge to hinge) · Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. · Solid brass, Zinc as per customer choice. · Glass to Glass, wall to Glass shower door hinges. · Closing angles 90°, 135°,180°degree. · Straight edges, beveled edges, round edges. · Glass preparation- Mickey Mouse ear, square and round glass cut. · Glass thickness 8mm-12mm. · Glass door weight 35~36Kgs with two hinges. · Glass door weight 54Kgs with three hinges. · Also available in some models of shower door hinges with adjustable hinges. · Also available in auto- self closing for some models. · Also available in Bi-fold Hinge.
Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size
Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size
PRODUCT INFO Cowslip Creeper flowers grow on long and slender, vining plants that bear dark green, heart-shaped leaves averaging 4 to 8 centimeters in diameter. The vines are tough, maturing from green to brown, and alongside each leaf node, a cluster of 10 to 20 flowers appear seasonally. Each flower averages 1 to 2 centimeters in diameter and bears five angular petals, forming a star shape. When young, the flowers are green, eventually developing a yellow-green hue at the base with solid yellow petals once the bud opens. The flowers also emit a strong and pleasant, citrus-like fragrance that is especially pungent in the evening when in bloom. Cowslip Creeper flowers are crisp, succulent, and tender with a mild, vegetal, subtly sweet, and earthy flavor. USES Cowslip Creeper flowers are a seasonal ingredient used in Filipino, Vietnamese, Chinese, Thai, and Indian cuisine. The flowers can be consumed raw, incorporated into salads for added texture, or utilized as an edible garnish to decorate cakes, desserts, and main dishes. In addition to fresh preparations, Cowslip Creeper flowers can withstand cooking and readily absorb accompanying flavors, providing a mild earthiness and subtle crisp consistency to dishes. The flowers can be battered and fried, tossed into soups and curries, or stir-fried with oyster sauce. In Thailand, Cowslip Creeper flowers are popularly boiled and dipped in chile paste. In the Philippines, the flowers are cooked into a vegetable dish known as pinakbet and frequently mixed into omelets. Cowslip Creeper flowers pair well with noodles, rice, meats such as pork, beef, and fish, shrimp, eggs, tofu, aromatics such as garlic, ginger, and holy basil, pandan juice, coconut, and vegetables such as mushrooms, long beans, squash, eggplant, and mung beans. The flowers should be immediately consumed for the best quality and flavor. SEASONS Cowslip Creeper flowers are available in the late spring through early fall.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Round and square PCD diamond blank PCD piece 51mm diameter round shape PCD cutting tools PCD blanks 1. The introduction of PCD cutting tool blanks(PCD cutter/ PCD blanks) : PCD cutting tool blanks are composed of diamond powder and tungsten carbide in high temperature and pressure. They have the high hardness and abrasion resistance of nature diamond, and combined with the toughness that of tungsten carbide If you need any products, do not hesitate to contact 2. The Application of PCD cutting tool blanks(PCD cutter/ PCD blanks): Suitable for the machining of non-ferrous metal and alloys, such as aluminum, copper, zinc, as well as wood, ceramics, rubber, plastic, fibre, etc. 3. Some useful tips of PCD cutting tool blanks(PCD cutter/ PCD blanks): The normal shape is round, also could be cut into rectangles, triangles, sectors, etc. as request. The main controlling factor determining PCD grade(the work piece surface finish and the abrasion resistance(tool life) )is the grain size. It is generally accepted that abrasion resistance increases with increased grain size, and the work piece surface finish are increases with the decreasing grain size. The medium grain size PCD blanks are generally used for their ability to strike a balance between good abrasion resistance (tool life) and maintaining good work piece surface finish. The PCD blank is thermally stable up to 750C, so its better to be welded with silver solder in a very short time, otherwise will cause carbonizing reaction or crack. 26 years experience in the cutting tool industry, factory in Chengdu, China Grinding and inspection equipments imported from UK, Germany, Japan Inspection in every process to ensure 100% qualified World-class technical team and R&D capacity Pass ISO, Germany TUV and Swiss SGS certificates Samples free for testing
Pangasius, basa, shrimp, prawn, catfish, tilapia, tuna, seafood, mackerel, sardine, vannamei, black tiger, scampi, lobster, apple, meat, frozen, fish, juice, coconut, chili, banana, vegetable, can, canned, tin, pineapple, lime, dried, dry, dehydrated, cassava, taro, jackfruit, durian, tomato, corn, sauce, leave, whole, spice, herb, banana, oil, powder, flour, black, puree, concentrate, salmon, red, pea, passion, orange, panga, swai, fresh, freshwater, river, natural, cut, process, produce, chicken, beef, buffalo, quail, rice, pepper, cashew, turmeric, ginger, garlic, cinnamon, cassia, star, anise, cloves, nutmeg, fennel, ground, mince.
PCD wire drawing die, PCD die blank, PDC cutter, PCD cutting tool blank.
PCD inserts can be used for cutting other non-ferrous metals such as aluminum alloys and non-metals such as fiber-reinforced plastics (GFK and CFK), hard rubber, wood, fiberboard, melamine resin polymer materials and fiber-reinforced metals (MMC). Using cutting tools with diamond coating, you can get faster cutting speed and longer tool life, and the quality and accuracy of the surface of the processed material will be higher. Specification 95%-99% of the components of PCD (polycrystalline diamond) are carbon isotope C12, and its thermal conductivity is 50% better than natural diamond and 2 times faster than copper. Diamond is a hard material, using a special high temperature and high pressure process, a tight layer of polycrystalline diamond can be pasted on the cemented carbide substrate
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details