Washable, breathable and fashionable orthopedic casts and splints 10, 000 sets
is specializing in the production of medical consumables, established in 2012 with a registered capital of 30 million. The main products are absorbable surgical suture with needle Plain Chromic Catgut, PGA, PDO, PGLA, PGCL, etc., non-absorbable surgical suture with needle Silk, Nylon, Polyester, Polypropylene etc., suture materials, cassette sutures and surgical needle 300SS and 400SS Series, lifting threads for beauty, medical facial mask, orthopedic casting tapes & splints, plaster, IV cannula, polypropylene meshes and absorbable bone nails and so on.
Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX002 (5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.120kg
Material: fiberglass Application area: mainly used for the external fixation of fracture and common orthopedics. Model no.: ax005 (12.5cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High strength and light weight. 2. Quick solidifying and good mouldability. 3. Easy operating. 4. Excellent x-ray radiolucency. 5. Good air-permeability. 6. Water-resistant. 7. Environment friendly materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.280kg
Tomato Casting Tape (FIberglass or Polyester) Size : 1inch~7inch Width Length :1.8m~3.6m Self Production for raw material, like pu resin and fiberglass fabric
Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: High strength, light weight molding fast Good air permeability Excellent x-ray radiolucency Waterproof Environmentally friendly Simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw
Hot sale orthopedic cast bandage colorful casting tapes orthopedic surgery cast tape Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: high strength, light weight molding fast good air permeability excellent x-ray radiolucency waterproof environmentally friendly simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw.
Introduction Our orthopedic casting tape is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It's used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It's the upgraded and replaced product of the traditional plaster bandage. Our Advantages 18 years profesional manufacturer of Medical Orthopedic Fiberglass CastingTape FDA CE Certfication OEM your size and packing Various Colors for Choose 7-15 Working Days for Delivery Free Samples Offered for Test Features High Strength, Light Weight Molding Fast Good Air Permeability Excellent X-ray Radiolucency Waterproof Environmentally Friendly Simple Operation Size: AX002 5cm 360cm AX003 7.5cm 360cm AX004 10cm 360cm AX005 12.5cm 360cm AX006 15cm 360cm Storage Warranty: Be careful not to break the packaging Storage at room temperature Shelf-life: 2 years Shipping: within 15 working days after payment Certificates : CE FDA About us Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products: such as Orthopedic Fiberglass Casting Tape, Splint, also supply cast padding, stockinette, elastic bandage, crepe bandage,cohesive bandage, gloves and electric cast saw.
Orthopedic Car & Chair Backrest Product Code: BR-01 Description Back Rest Made from high quality moulded PU foam. It is suitable to correct sitting posture and avoids back pain while on seat. It comes with extra elastic to cover the seat. Adjustable belt with D hook. It is ideal for the People having to sit long hours on the chair and suffering from back pain. It removes discomfort and pain after surgery
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX003 (7.5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.142kg
Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX006 (15cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.298kg
Elbow Joint Splint (AJY-S12) It is used for elbow joint fixation for tendon, soft tissue, and nerve injury in the elbow joint in time for postoperative fixation of the joint. 448*260*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Hand function position fixed splint (AJY-S09) It is used for the fixation of stable fractures of the hand and wrist, the fixation of neuromuscular and tendon injuries, and the fixation of functional positions after orthopaedic surgery. Prevent deformity caused by bone and joint disease in thumb-to-finger and palm-to-hand positions shape. 337*170*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Hand rest position fixed splint (AJY-S08) It is used for fixation after orthopedic surgery such as hand and wrist fractures, nerve tendon injuries, scar contractures, etc., to prevent or correct the deformities caused by bone and joint, neuromuscular disease. 360*210*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Thumb-fixed splint (Herringbone) AJY-S02 It is used for thumb metacarpal bone, acute metacarpal arthritis, thumb sprain, rheumatoid arthritis, post-tiger occidental occidental surgery and thumb function fixation after median nerve injury. 200*165*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Achilles tendon dorsal splint (AJY-S11) It is used for dorsal fixation after Achilles tendon injury, topological fixation of supporting foot. 442*247*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy