Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
Absorb every kind of gas and vapour,
Do not need inner lubrication,
Work quite and vibrationless,
Do not have disorders because there is only one moving part,
Have long life-span at high efficiency with less maintenance
40mm inlet&outlet, 3kw motor power, 1500rpm, 14lt/m service water
APPLICATIONS
Communication Devices
Electronics used in Automobiles
Alarm Circuits
Portable Devices
Security Systems
Timers
Household Appliances
Electronic Metronomes
Game Shows
Having in mind that different requirements of consumers, we are trying Mono Block Pump Set. Those results are explained in accordance with the set production patterns & excellent variety of ingredients. Submitted outcomes are done in an article and pulp production and much more attention. Our property specialists investigate those results on a number of parameters in a system to make confident.
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Benchmark in head and water discharge at 170 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5.Easy in Handling. 6. Faster Self-Priming
Minimum Order Size and Packaing details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge head and water discharge at 150 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5. Easy in Handling. 6. Faster Self-Priming
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 600 L.P.H. at 125 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Fitted with Thermal Overload Protector (T.O.P.). 3. Easy in Handling. 4. Faster Self-Priming. 5. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 6. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Lifts Water upto 50 feet. 3. Can work either on AC or DC supply at 120 Volts. 4. Cast Iron Pump Unit with Sheet Metal Body for Sturdiness and Longer Life.
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 1000 L.P.H. at 110 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Lifts Water upto 80 feet. 3. Can work either on AC or DC supply at 120 Volts. 4. Cast Iron Pump Unit with Sheet Metal Body for Sturdiness and Longer Life.
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Lifts Water upto 60 feet. 3. Can work either on AC or DC supply at 120 Volts. 4. Cast Iron Pump Unit with Sheet Metal Body for Sturdiness and Longer Life.
Minimum Order Size and Packaging details - 20 feet container
Available Up to 2.0 H.P., Specially Design For Low Voltage Range.
MATERIAL OF CONSTRUCTION: Shaft : S.S. 410, Motor Body : Graded Cast Iron, Impeller : Graded Cast Iron, Casting Parts : Graded Casting, Roller Bearing : SKF Made Bearing. Thermal Overload Protector Available.
TECHNICAL DETAILS: Head Range : Up To 30 mtrs, Discharge Range : Up To 1000 lpm, Suction & Delivery : 25 X 25 mm / 50 X 50 mm / 65 X 50 mm/ 75 X 65 mm, Power Rating : 1 H.P. TO 2 H.P., Voltage Range : 120 V TO 240 V (1-Phase).
