Melamine Cyanurate used for V-0 grade nylon(PA66 and PA6) and glass fiber reinforced nylon flame retardancy Category: Flame Retardant Powder Tags: Film Grade, Masterbatch, Polyester Chips, Textile Grade Classification: Inorganic Flame Retardant CAS No.: 68333-79-9 Product Description: Melamine Cyanurate (MC) is a halogen-free flame retardant commonly used in unfilled polyamide (PA) products. It provides exceptional flame retardancy, achieving the UL 94 V0 flame retardant rating in materials such as nylon PA66 and PA6. MC is recognized for its unique crystal structure and excellent dispersibility, making it highly suitable for various polymer applications. Key Applications: Flame Retardancy: PA6, PA66 (nylon) PBT, PET TPE, EVA, PE Silicone Rubber, Epoxy Resin Rubber Products MC is an effective solution for enhancing the flame retardant properties of these materials, ensuring both safety and performance in a wide range of industrial applications.
Application As one of anti-flaming solvents adapting to nylon without halogenations, MCA especially applies to nylon number 6 and number 66, which can achieve the anti-flaming effect with UL 94 V level easily; It's worthwhile to point out that it has such advantages as very low application cost, super electrical capacity, mechanical performance and excellent pigmentation effect ect.
As a halogen-free flame retardant, MC series is suitable for PA6, PA66,PET,TPE,EVA,PE,silicone rubber,epoxy resin and rubber products. It has low application cost,excellent electrical and mechanical and good pigmenting properties.
Physical appearance:fine, white, crystalline powder, nontoxic, odourless ; in dissolvable in water and most organic solvents. Use: Melamine Cyanurate is a halogen-free flame retardant for polyamide. Melamine Cyanurate has established itself as the flame retardant to achieve UL 94 V-0 especially for polyamide 6 and 6,6. Addition of MCA gives PA6(66) good mechanical and electrical properties. Being halogen free also results in significant advantages in terms of fire safety, i.e. lower smoke density, lower smoke-toxicity and less corrosion.
Chemical Name: Melamine Cyanurate Flame Retardant Composition content CAS NO.37640-57-6 Melamine Cyanurate content: 99.7% Moisture: 0.3% Hazard category non-hazardous chemicals Routes of entry: inhalation, eyes, skin contact Health Hazards: Eye contact may cause irritation. Toxicity: No toxicity if ingested, no skin absorption. Environmental hazards: none Emergency measures: cut off the fire source. It is recommended that emergency personnel wear self-contained positive pressure respirators and anti-static overalls.
Melamine Cyanurate CAS:37640-57-6 Molecular Formula:C6H9N9O3 Application: As a halogen-free flame retardant, MC series is suitable for PA6, PA66,PET,TPE,EVA,PE,silicone rubber,epoxy resin and rubber products. It has low application cost,excellent electrical and mechanical and good pigmenting properties.
Melamine Cyanurate In Stock CAS:37640-57-6 Molecular Formula :C6H9N9O3 Application : As a halogen-free flame retardant, MC series is suitable for PA6, PA66,PET,TPE,EVA,PE,silicone rubber,epoxy resin and rubber products. It has low application cost,excellent electrical and mechanical and good pigmenting properties. Packing and storage:20kg /bag, using kraft bags with PE inner. Handle with care,keep airtight and dry.
Melamine Cyanurate(CAS:37640-57-6)
Structure: Name: Melamine Cyanurate(MC15) Formula: C6H9N9O3 Molecular Weight: 255.2 CAS No.: 37640-57-6 EINECS:2535757 HS code:2933699090 Application: White powder, non-toxic, tasteless, soapy.Insoluble in water or most organic solvents. Melamine Cyanurate MC15 is a halogen-free flame retardant for polyamide 6(66),PET, TPE cable and epoxy resin. Addition of MC15 gives products good mechanical ,electrical and pigmenting properties. Good color stability Excellent electrical performance Environmental friendly 20kg /bag, using paper bags 2000T/Year Handle with care,keep airtight and dry. Item Index Content of MC15,% >99.5 Excess Acid ,% 96 PH (5% aqueous) 5.0-7.0 Water Content ,%
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Melamine is an organic Chemical industry semifinished product with even structure and vast applications.It is mainly used as the material to produce melamine formaldehyde(MF)colophony
Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer that is fire resistant and heat tolerant. Resin is a versatile material that has a highly stable structure. Melamine can be easily molded while warm but will set into a fixed form, which makes it suitable for certain industrial applications. This compound is considered safe for its normal uses, but food products that are contaminated with it can be unsafe for consumption. Application: Melamine is mainly used for high-pressure decorative laminates such as Formica, melamine dinnerware, kitchen worktops, furniture, laminate flooring, adhesives for board materials such as particle board (chipboard), MDF (medium-density fibreboard) and plywood, oriented strand board (OSB) and laminated veneer timber (LVT). Packing: 25kg bags, 50kg bags, 1000kg jumbo bags. Item Specification Appearance: Fine, white crystalline powder Melamine, % by weight: 99.8 min Ash, % by weight: 0.01 max Moisture, % by weight: 0.1 max Screen analysis % on 40 mesh % thru 325 mesh: 1.0 max 35.0 max Color, APHA: 15 max
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
1 108-78-1 Melamine 2 37640-57-6 Melamine cyanurate 3 63428-83-1 Polyamide 4 106-50-3 1,4-phenylenediamine 5 9002-89-5 Poly(vinyl alcohol) 6 105-60-2 �µ-caprolactam 7 10578-34-4 Stearyl benzoate 8 108-31-6 Maleic anhydride 9 108-05-4 Vinyl acetate 10 26264-06-2 Calcium dodecylbenzene sulfonate 11 111-69-3 Adiponitrile 12 924-42-5 N-Methylolacrylamide 13 100-20-9 Terephthaloyl Chloride 14 99-63-8 Isophthaloyl Chloride 15 1338-02-9 Copper naphthenate 16 6153-56-6 Oxalic acid dihydrate 17 79-10-7 Acrylic acid 18 75-01-4 Chloroethene 19 25190-06-1 Poly(butylene oxide) macromolecule 20 77-99-6 Trimethylol propane
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
MDF Board ***** Flatt and Smooth surfaces by well sanded *****or MDF Melamine faced ***** Core made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** usage : Housing components - Furniture components - Carving purposes **** MOQ 40 m3 in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** or 50% Deposit and 50% Balance after received container in buyer ware house and checking quality ***** No L/C accepted due to high Banking fee & Complicated procedures
We supply (Garjun) Keruing plywood with 100% core (Garjun)Keriung, face and back (Garjun)Keriung 1220*2440 in thickness 6mm,9mm,12mm,15mm,18mm... Grade: AA/AA Both sides SANDED. Glue: Melamine and MR
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Authorized selling agent for Dolphin Nitrile Glove ready stock Production Origin : Malaysia Fob : Hong Kong
