5mm to 0.1 mm dia in Enameled Copper Magnet Wire Polyester Covered Copper Magnet Wire Temp Class 130, Modified Polyester Covered Copper Magnet Wire Temp Class 155, Polyesteremide Covered Copper Magnet Wire Temp Class 180, Polyesteremide-amide Covered Copper Magnet Wire Temp Class 200, Polyurethane Covered Copper Magnet Wire Temp Class 155 and 180, 1 Sqmm to 36 Sq mm in Enameled Strips, min, width 1mm and min. thickness 0.8 mm. Polyester Covered Copper Magnet Strip Temp Class 130, Modified Polyester Covered Copper Magnet Strip Temp Class 155, Polyesteremide Covered Copper Magnet Strip Temp Class 180, Polyesteremide-amide Covered Copper Magnet Strip Temp Class 200, Paper covered Copper wire and Paper covered Copper Strip,Fibre Glass Covered Copper Wire, Fibre Glass Covered Copper Strips, Enameled Fibre Glass Covered Copper Wire, Enameled Fibre Glass Covered Copper Strips Wires in 2.5 Kg to 90 Kg Packing as per Specification, in Min lot of 10 MT and above, Strips in 50 Kg to 100 Kg in Wooden Spools.
Features: 1) high hot impact performance 2) good electric conductivity 3) low weight 4) ideal winding wire for electric machinery with short, periodic workloads Specifications: Diameter ranging from 0.1ú¦mm-6.00mm, gauge: awg(39--50) swg(5--38), insulating film as per customer required Both in round and rectangular type Application scope: í= Application in light winding with high relative conduction, good heat emission, especially winding transmits high frequency sign í= High frequency transformer, general transformer, inductance coil, electric motor, home electric motor and micro-motor magnet winding coil í= Micro-motor rotor wing coil enameled wire í= Acoustics wing coil, cd driver special enameled wire í= Display turning winding coil í= Demagnetized winding coil í= Mobile phone inner wingding coil, water driver elements í= Other special magnet wire Packing term: packed in cartons on pallet and lined with single polymembrane inside The minimum order quantity: the total quantity(all size) one 20í»container Payment term:t/t(40% payment at advance, 60% within one week after receiving the copy of b/l)
Product Description: The present trend of the appearance structure of consumer electronics is designed to be "light, thin, short and small". Well Ascent fine and ultra fine rectangular enamelled  wire has excellent quality and performance, it can be met the requirement of flattening, light-weight, low power consumption and high performance. Product Details: Type:Insulated Application:Relays/Transformers/Motors/Winding Conductor Material: Conductor Type:Solid Insulation Material:Enameled Product Name:Square / Rectangular Wire Brand:Yubian Diameter:0.155-7.5mm
Enameled magnet wire refers to a type of wire that uses metal wire as a conductor, is coated with insulating paint on its surface, and is cured into insulated wire after baking. It can isolate current and act as a conductor in electrical equipment. At the same time, it has certain high-temperature resistance and mechanical strength, suitable for electrical equipment with high temperature, high frequency, and high voltage. Quality Control Measures for enamel magnet wire Due to its important role in electrical equipment, the quality of plain enamel magnet wire directly affects the performance and safety of the entire equipment. Therefore, it is crucial to take effective quality control measures. 1. Raw material control 2. Production process control 3. Quality testing 4. Environment and operator control 5. Quality Management System By implementing the above measures, the quality of 16 awg enameled magnet wire can be effectively controlled, ensuring that it meets the requirements of electrical equipment usage, and improving the reliability and safety of the product. Advantages of Enameled Magnet Wire Custom Magnet Wire Enameled copper wire Polyester Film Insulated Round Copper Magnet Wire Thermal Class F (Single and Heavy) Polyurethane Film Insulated Round Copper Magnet Wire (F and H Thermal Class) Polyester-imide Film Insulated Round Copper Magnet Wire Thermal Class 180 Polyamide over Coated with Polyester-imide Insualted Round Magnet Copper Wire Thermal Class C Aluminium winding wire Polyurethane ECCA Wire QA/155 (180) Type 0.08-1.30MM Polyesterimide ECCA Wire QZY/180 Type 0.13-1.30MM Polyamide-imide ECCA Wire Q (ZY-XY)/200 Type 0.13-1.30MM Copper Clad Aluminum Annealing Wire Copper coated aluminum wire 155C Modified Polyester Enameled Aluminum Wire 155C Polyurethane Enameled Aluminum Wire 180C Polyesterimide Enameled Aluminum Wire 200C Polyamide-imide Enameled Aluminum Wire Specialized in Magnet wire Product Size Range: 0.05mm-3.20mm (AWG7-AWG44, SWG10-SWG47) Product types: Class 130â??- Class 220â?? Executive standards: IEC, JIS, GB and NEMA High Quality and Competitive price Equipped with advanced production facilities and precise computer monitoring systems to guarantee product quality, we have attained ISO9001, 1S014001. UL. RoHS and REACH certificates.
Product Name : Antimagnetized wire thread insert supplier Material : Stainless steel, copper alloy, high temperature alloy. Advantage : High strength, high bearing capacity, high wear-resisting, high corrosion resistant Surface Treatment : Natural, silver plating, cadmium plated, colourful Specifications : GB/MS/MA/BS/AS Standard ones and customized Packing : Cartoons or wooden cases a professional design, research and development and production of thread inserts and tools of professional manufacturers. We produce customized thread inserts, self tapping inserts, tailless nesting, keensert and installation tools for inserts. We have also passed the GB / T 19001-2016 / iso9001:2015 standard and GJB9001c-2017 standard certification, and have relevant SGS certification.
Polyester(amide-imide) magnet wire Specifications range: diameter 0.100-- 3.500mm Implementation of the standards: iec317, nema, jis, gb6109, enterprise standard or customer standard Product characteristics: it has excellent resistance to heat, wear and refrigerant. Application areas: it is applied to electric machinery with high temperature, high speed and frequent start, impervious Category: high temperature resistant and refrigerant resistant enamelled Thermal class: 220c Pt15, pt25, pt60
Product Name : Non-magnetic wire sthread insert for new energy automobile Material : Stainless steel, copper alloy, high temperature alloy. Advantage : High strength, high bearing capacity, high wear-resisting, high corrosion resistant Surface Treatment : Natural, silver plating, cadmium plated, colourful Specifications : GB/MS/MA/BS/AS Standard ones and customized Warranty : 12 months Packing : Cartoons or wooden cases
1.Brief Introduction Key advantages of Magnetic wire tensioners: These magnetic tensioners use a device containing a permanent magnet as a noncontact method of generating a variable resistance to rotation of the main wheel of the tensioner, thus maintainingwire tension at the set value for longer periods than their mechanical counterparts with greatlyreduced requirement for adjustment. Polished ceramic eyelets and guide rollers at each point of contact protect the insulating enamel from mechanical damage. The performance of these magnetic wire tensioners is exceptional given the low cost, providing outstanding value for money. Captive roller on tension arm is easy to thread, eliminates chance of losing wire.
Anping Tenglu Metal Wire Mesh Co.,LTD 410/430 Magnetic Stainless Steel Wire Mesh Product Description: 410 SS is the general purpose hardenable, corrosion and heat resisting steel. It readily responds to hardening and tempering operations between 1100-1350°F. With different heat treatments this steel develops excellent combinations of strength and toughness over a wide range of mechanical properties. 410 SS is resistant to dry atmospheres, fresh water corrosion, and a variety of mild acids and alkaline. It is a common choice for severe forming and cold heading operations, particularly if heat treating of the part is desirable. Type 410 is magnetic in all conditions. 410 SS has a wide variety of uses due to its good mechanical properties. Materials:410(SUS410,S41000),430(SUS430,S43000) Feature: 410 stainless steel wire mesh is magnetic and of good corrosion resistance 430 stainless steel wire mesh has good resistance to stress corrosion and oxidation. 410/430 magnetic stainless steel wire mesh has good thermal conductive performance than austenitic stainless steel series. Its thermal expansion coefficient is smaller than austenitic. Resistant to thermal fatigue, add the stable element titanium, mechanical performance of welded parts is good. With magnetism, 410/430 stainless steel wire mesh is also called magnetic stainless steel wire mesh, stainless iron wire mesh, magnetic stainless iron wire mesh. Application: 410/430 stainless steel wire mesh is mainly used in manufacturing parts which are resistant to air,steam,water and oxidizing acid corrosion. 410/430 stainless steel wire mesh can be used for industrial filtering, food industry filtering, sugar industry filtering etc.
We produce and provide Magnetic Dots that are used to hold paper or white board. We have offered these products in customized forms and sizes such as 40 mm dia and 50 mm diameter. Besides they have also been offered in variety of configurations such as Vinyl Foam and Foam Magnet. Applications: Used to hold paper Size Available: Customized Die Cut Variety of Configuration: Reflective Vinyl Foam
Specifications 1.0.10~4.50mm 2.Use in winding machine/motor/transformer 3.Good heat resistance Polyesterimide enameled copper wire (eiw/qzy) 1. Thermal classification: f h class 2. Diameter: 0.1~4.50mm 3. Performance and characteristics of products: A> very good heat resistance, heat shock resistance and solvent resistance. B> good for high-speed winding due to its C> crazing in solvent with stress. 4. Main application areas: Dry transformer. Heat resistance. Generator. Electric tool motor. High speed motor and generator. Hvt for microwave oven. Used for automotive coils as relays and ignition coils, in transformers and in solenoids. Pt15 pt25 pt60
We have an edge in presenting Convergence Purity Magnet. It is basically a magnetic beam-adjusting device for use in the region of the neck of an in-line type color picture tube and is composed of three pairs of plastic magnet rings. Virtually each pair comprises 2-pole, 4-pole and 6-pole plastic magnet rings. The tool comprises a magnetic field distribution suited to a silky adjustment of the electron beam, as a result permitting centralization and rotation of electron beam in the order of the color picture tube. Neck Dia: 29 mm Size Available: For 14", 20", 21", 29" tubes