Carbon raiser is a carbon material, produced at high temperatures and used for carburization of steel and cast iron. It is applied during the steelmaking with low cast iron content (allow of steel and carbon) in charge in oxygen converter and electrosmelting processes. In metallurgy carbon raiser (milled graphite) is widely used for slag foaming, during coal graphite production, as a filler for graphite-reinforced plastic.
Talc, mica, fly ash, bauxite, calcined bauxite, potash feldspar, quartz, sand, silica sand, micro silica, silica fume, bentonite, bleaching clay, ball clay, ethyl acetate.
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur : 0,07% Gross Caloric Value : 6800 Kcal/Kg
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur :0,07% Gross Caloric Value :6800 Kcal/Kg
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur :0,07% Gross Caloric Value :6 800 Kcal/Kg
Wood Charcoal Moisture 5% Volatile 20% Ash content 4.9% Fixed carbons 69.5% Sulfur 0.07% Gross coloric value 7000 kcal
Total Mousture =---- Ash Content : 4,26% Volatile Matter : 4,79% Fixed Carbon :90,95% Total sulfur :0,05 % Gross Caloric Value :7676 Kcal/Kg Ready for grade = AB ABC CD DE
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Cement, clinker, bauxite, gypsum, fly ash, slag, steel products, kaolin, scrap, pumice stone, silica sand, dolomite, coal, anthracite coal, pet coke, wood pellets.
Petroleum Coke Product Description : Petroleum coke is a byproduct of the oil refinery industry. Petroleum coke refers to all types of carbonaceous solids obtained in petroleum processing, which includes green or raw, calcined and needle petroleum coke. Petroleum coke is used in many applications, including electrodes and anodes. It is also used as a fuel in the metal and brick industries. Price of product ( USD price or FOB price) : 10.000 MT monthly market price. 100.000 MT monthly market price Less 8%. Product origin : Russia and Non Russia Key Specifications/Special Features : Fuel Grade Petroleum coke of Low/High Sulphur. Calcium Petroleum coke, Graphitized Petroleum coke. Raw Petcoke, Anode Grade, Green Grade, Carbon Grade, Cement Grade, Needle coke, etc. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Deals in activated carbon powder, granular activated carbon, sawdust, wood sawdust, biomass briquettes, white coal, iron ore, laterite, spices, raw salt, sea salt, common salt, refined salt, bleaching earth, mill scale, hms scrap, low ash metallurgical coke, marine gypsum, silica sand, silica flour, quartz, hematite powder, bentonite powder, china clay, quartz sand, fly ash, kaolin clay.Indonesian coal, South African coal, coke fines, ground granulated blast furnace slag ,coal based activated carbon, zinc ash, zinc dust, zinc, coal dust, earthing coal, coke breeze, talc powder, dolochar, gypsum powder, plaster of pairs, aggregate, marine gypsum, gypsum powder, pop & coke fines, chemical gypsum,saw dust ,washed marine gypsum, quartz powder excavator, ggbfs, granulated blast furnace slag, fly ash, iron mill scale, bleaching carbon.
Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers
Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container
Natural Gypsum: Gypsum (CaSO4.2H2O) is a naturally occurring mineral mined from deposits formed by ancient sea beds as a raw material, white when pure, but commonly grey, yellow, red or brown, owing to impurities. The anhydrous form (CaSO4), anhydrite, is common. We are enlisted amongst the topmost INatural Gypsum Importers and Exporters from India. Applications: Gypsum has many industrial applications in its raw or Calcined forms, especially in the building and construction industries. Uses of Raw Gypsum are principally as: - a retarder for Portland cement - a fertilizer or soil conditioner - mineral filler - oxidizing agent in glass manufacture or other industrial applications. Most gypsum is calcined and used in the manufacturing of plaster products. Wallboard and plaster requires gypsum contents greater than 85%, although producers prefer a minimum of 94–95% along with whiteness in color. The major consumers of the Gypsum at present are Cement Industry. By weight about 4% to 6% Gypsum in crushed condition is utilized in Portland Cement Manufacture after mixing with cement/clinker. Gypsum acts as a retarder and controls the setting time of cement. Imported Gypsum from Iran: Natural Gypsum is one of the most superior qualities and consistent material available for Import and Export. Natural Gypsum has adequate whiteness, high purity as well as it is low in cost which makes it absolutely feasible for white cements as well as Plaster Of Paris manufacturing and for the Cement Industry all together. One more important quality that distinguishes Natural Gypsum from others is its hardness which is less as compared to other sources and allows different industries to easily grind the same for processing into final product which in turn results in to reduced power consumption for manufacturing industries.
Quartz: Quartz is one of the most well-known minerals on the earth with numerous uses. Sand, which is composed of tiny Quartz pebbles, is the primary ingredient for the manufacture of glass. We feel pride in introducing ourselves as a leading Quartz Lumps Exporters from India. Mineral-grade packaging is provided for safe and easy delivery of Quartz Lumps. We welcome orders from Middle East, East Asian and several other countries and ensure timely shipment. Applications : It is used as an abrasive for sandblasting, grinding glass and cutting of soft stones. Quartz powder is also used in ceramic tiles along with feldspar.
Kaolin: Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries. Applications: Paper: Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties. Concrete: Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete. Plastics : Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure. Agriculture : It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant. Rubber : It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application. Paint : Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product. Ceramic : Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Ball Clay: A member of kaolinite family, Ball Clay is renowned for its plasticity and green strength. They consists varying proportions of kaolinite, mica and quartz, with small amounts of organic matter and other minerals, and are commercially values because they increase the workability and strength of various ceramic bodies and have white or near white firing characteristics. Ball clay is processed to minimize the levels of coarse particles. This enhances better workability and higher strength. Applications : It forms a major part of many ceramic applications, including sanitary ware, tiles, table wares and to an increasing extent non-ceramic applications like functional fillers and advanced application for example technical ceramics.
Potash Feldspar: We have come up as a dependable firm bringing forth Potash Feldspar all over the world. Based in India, we are exporting Potash Feldspar in varied quantity packs. Potash Feldspar are processed and are used for varied industrial applications. Further, we keeping in mind the budget constraints in mind, we offer Potash Feldspar at the market leading prices. About Feldspar: Feldspar is non-plastic Potassium or Sodium Alumino silicate mineral represented as KAlSi38or NaAlSi38. Feldspar is used generally for the following purposes : Ceramic Manufacturing formulations : In making the body composition of several types of ceramics and in preparation of glazes and enamel, Glass Manufacturing and Abrasive Manufacturing. It is used along with Ball Clay, Kaolin and quartz for tiles and sanitary Wares manufacturing. The presence of iron even in small quantity tends to impart coloration.
