1 Capscrew & whasher 304 stainless steel 2 1 Handwheel Cast iron, astm a126 class b 3 Bolts & nuts (o-ring plate) 304 stainless steel 4 1 O-ring plate Cast iron, astm a126 class b 5 2 O-rings (o-ring plate) Rubber 6 1 Gasket (o-ring plate) Composition 7 1 Low torque bearing Delrin 8 1 Cover Cast iron, astm a126 class b 9 Bolts & nuts (cover) 304 stainless steel 10 1 Gasket (cover/body) Composition 11 1 Non-rising stem Low zinc bronze 12 1 Stem/gate nut Bronze 13 1 Body Cast iron, astm a126 class b 14 2 Wedge Bronze 15 2 Hook Cast iron, astm a126 class b 16 2 Gate/disc Cast iron, astm a126 class b 17 2 Gate/disc ring Bronze 18 2 Case/body ring Bronze 19 1 Operating nut Cast iron, astm a126 class b 20 1 Pipe plug Steel with teflon 21 4 Capscrew on 10" & 12" only Silicon bronze 22 2 Straps on 10" & 12" only Stainless steel
API 600, BS 1414, ASME B16.34, BS 6364 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem (Pressure Seal Bonnet CL-900, 1500 & 2500) Ends : Flanged, Butt Weld Operator : Hand wheel, Gear, Electric, Chain Wheel Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, FET, TAT, By pass Arrangement, IBR Item Code : CCS00001 Size : 50mm Notes : Available Valve Size : CLASS-150� � � � 40mm to 1200mm CLASS-300� � � � 40mm to 900mm CLASS-600� � � � 40mm to 900mm CLASS-900� � � � 40mm to 900mm CLASS-1500� � 40mm to 600mm CLASS-2500� � 40mm to 400mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
We make customized rolling, sliding gates, collapsible gates for home, commercial building factories etc. These gates come in Aluminum, Stainless Steel or in Steel. The surface is powder coated to last many years after installation. These gates can be installed on tracks or without tracks. Every aspect of the gates can be customized. These gates are easy to operate with minimal effort. Our standard dimensions Height 1600mm (height can customized) Stretching ratio: 1:0.17 + 0.42 (can be customized) Gate Minimum length :2 Meters Gate Maximum length: upto 90 meters ( double Gates) Operation: Hand operated, Motorized. Colors available: Blue, Red (colors can be customized) Please contact us for competitive pricing.
Cast Iron Gate Valve Pressure Rating : Class-125 Material : Cast Iron Description : Bolted Bonnet, Inside Screw, Rising Stem Trim : All Iron / Gun Metal Ends : Flanged Operator : Hand wheel Item Code : CI000004 Size : 50mm Notes : Available Valve Size : 40mm to 300mm
Cast Iron Gate Valve Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Bolted Bonnet, OS & Yoke Type, Rising Stem Trim : Gun Metal, Stem : SS (IS 6603) (12 Gr. 13) Ends : Flanged Operator : Hand wheel, Gear, Electric, Chain wheel Specials : Stem Extension, By Pass Arrangement Item Code : CI000058 Size : 50mm Notes : Available Valve Size : PN-10 50mm to 600mm PN-16 50mm to 600mm PN-20 50mm to 600mm Class-125 40mm to 600mm
The knife gate valve is truly a high performance knife gate valve design. This valve provides zero leakage Bi-directional shut-off, has mechanically retained seal, has a compact non-rising stem design, and can be Repacked in service under full pressure. The chest and seating areas of the valve are self-cleaning. The Reduced chest area, minimal gate arc, and contoured flushing corners in the body prevent jamming by Eliminating material build-up in the chest, body and seating area. The gate seals against a combination Metal and resilient seat and is guided for the full stroke length of the valve. The top “transverse” seal is repackable while in service under full pressure. The valve is tested and rated for zero leakage (liquid or Gas) downstream and to atmosphere.
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
Forged Steel Gate Valve API 602, BSEN ISO 15761, ASME B16.34, BS 6364 Pressure Rating : Class-800 Bore : Full & Regular Material : Forged Steel (A105) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem (Welded Bonnet for CL-1500 & 2500) Ends : Socket Weld, Butt Weld, Screwed Operator : Hand wheel, Electric Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, FET, TAT, IBR Item Code : FCS00002 Size : 15mm Notes : Available Valve Size : CLASS-800 8mm to 50mm CLASS-1500 15mm to 40mm CLASS-2500 15mm to 25mm Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321
Forged Steel Gate Valve BSEN ISO 15761 Pressure Rating : Class-150 Material : Forged Steel (A105) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem Ends : Welded on Flanges Operator : Hand wheel, Electric Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, FET, TAT, IBR Item Code : FCS00040 Size : 15mm Notes : Available Valve Size : CLASS-150 15mm to 50mm CLASS-300 15mm to 50mm CLASS-600 15mm to 50mm Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
* The A216 WCB Cast Carbon Steel Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Cast Steel Butterfly Valve Pressure Rating : PN-10 Material : Cast Steel (WCB) Description : Wafer type, Centric Disc Body Seat : Moulded EPDM, BUNA-A, Neoprene, Viton Ends : Wafer, Lugged Operator : Lever, Gear, Electric, Pneumatic Item Code : CCS00014 Size : 50mm Notes : Available Valve Size : PN-10 40mm to 400mm PN-16 40mm to 400mm PN-20 40mm to 400mm Material : CF8, CF8M, CF3, CF3M etc.
Cast Steel Ball Valve API 6D, BSEN ISO 17292 Pressure Rating : Class-150 Bore : Full & Regular Material : Cast Steel (WCB) Description : Two Piece Antistatic Design, Floating Ball, Anti Blowout Proof Stem Design Body Seat : PTFE, RPTFE, Peek Ends : Flanged, Butt Weld Operator : Lever, Gear, Electric, Pneumatic Specials : Fire Safe, IBR Item Code : CCS00016 Size : 15mm Notes : Available Valve Size : CLASS-150 15mm to 200mm CLASS-300 15mm to 200mm CLASS-600 15mm to 150mm Material : LCB, CF8, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
Cast Steel Globe Valve DIN 2401, BSEN 13709 Pressure Rating : PN-40 Material : Cast Steel (WCB) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem Ends : Flanged, Butt Weld Operator : Hand wheel, Gear, Electric, Chain Wheel Specials : IBR Item Code : CCS00010 Size : 15mm Notes : Available Valve Size : 15mm to 350mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
BS 1873, ASME B16.34, BS 6364 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem (Pressure Seal Bonnet CL-900, 1500 & 2500) Ends : Flanged, Butt Weld Operator : Hand wheel, Gear, Electric, Chain Wheel Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, FET, TAT, By pass Arrangement, IBR Item Code : CCS00004 Size : 50mm Notes : Available Valve Size : CLASS-150Â 40mm to 600mm CLASS-300 40mm to 600mm CLASS-600 40mm to 350mm CLASS-900Â 40mm to 300mm CLASS-1500Â 40mm to 300mm CLASS-2500Â 50mm to 300mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Hardwood and softwood logs usa and canada souther yellow pine logs, eastern white pine logs walnut logs, red oak logs, cherry logs, african teak logs & various other specie lumber sd and kd, syp lumber , ewp lumber lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood mdf: china ,thailand ,malaysia plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam shuttering plywood solid chipboard, particular board and osb board doors and frames.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
