Basic Characteristics Appearance: slightly yellow transparence liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Hand feeling:instantly hydrophilic Features And Advantages This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; 1.This product is particularly suitable for processing cotton or polyester-cotton fabric, can achieve instantaneous hydrophilic effect, hand feeling general; 2.This product can be used as antistatic agent for chemical fiber fabric; cationic strong, and anion may occur coagulation, application before the need to do the application test, or add the company's specialty products anion and cation anti-coagulation agent; 3.high temperature resistance, suitable for a variety of processing technology, will not bring sticky roller, high suction rate; without APEO. Usage 1.This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,using after diluting at the recommended ratio1: 2.5 (20% solids) or 1 :5 (10% solids) , and adjust the PH value of acetic acid to 6-6.5; The speed should not be too fast, otherwise the bubble more; 2. After thinning, you can use exhausting method and continuous padding mothod: Exhausting method: the dosage (20% solids) 1-4% (owf), temperature 30-40 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 10-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year. -
Appearance: slightly yellow viscous liquid Ionicity: Cationic PH value: 6--8 Solubility: self-emulsifying, can be can be dissolved in water at any ratio Active content: 60% Hand feeling: Hydrophilic, comprehensive soft,fluffy and smooth
Appearanceslightly yellow viscous liquid IonicityCationic PH value6--8 Solubilityself-emulsifying, can be can be dissolved in water at any ratio Active content30 1% Hand feelingHydrophilic, comprehensive soft,fluffy and smooth
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.
Silicon Metal 441 (Powder)
Ferro Silicon (FeSi)
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Our company alba grups ltd.is producer: essential oils: rose oil, lavender oil, mentha pipperita oil, yarrow oil, roman chamomile oil, german chamomile oil,hyssop oil, helichrysum oil, juniper berry oil, pine oil, melissa oil, geranium oil, clary sage oil, salvia officinalis oil, oregano oil, rosemary oil, thyme oil, coriander seed oil, siberian fir oil, jasmine oil. flower waters: rose damascena water,rose alba water, lavender water,juniper berry water, frankincense water, helichrysum water wormwood water, mentha pipperita water, pine water, gernium water, salvia officinalis water, clary sage water, oregano water, rosemary water, thyme water, jasmine water absolutes: rose absolute , lavender absolute, beeswax absolute, oakmoss absolute concrets: rose and lavender dried hers: rose dmascena and rose alba flowers, lavender flowers, juniper berry, tilia flowers, rosehip berry,rosehip seeds and more dried herbs from bulgaria..
Soybean Oil Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 - 141 Saponification Value: mg HOH/g: 180 - 200 Unsaponifiable Matter: %
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
REFINED SUN FLOWER OIL Sunflower Oil Vegetable Oil Soybeans Oil corn oil canola oil Private label orders are welcomed. Origin: Tanzania Inspection is allowed at the factory. Languages: French, German, English, Packaging is available in all consumer packs. Available packaging: 1L, 1.8L, 2L, 3L, 5L, 10L, 20L, Flexi tank.
It's a non-volatile oil pressed from the seeds of the sunflower and is commonly used as an oil for frying. ... It's a non-volatile oil pressed from the seeds of the sunflower and is commonly used as an oil for frying. Refined Sunflower Seed Oil Product sunflower oil Processing Refined Transparency without lees Smell and taste depersonalized oil odourless Color number,mg of iodine â?¥ 10 Acid value,mg kon/g â?¥0.25 Mass fraction of not fat admixtures,% Absence Peroxide value,�½ O2 Mmol/kg â?¥ 2.0 Mass fraction of moisture and volatiles content,% â?¥ 0.10 Mass fraction of phosphorus-containing substances in terms of stearooleoletsytyn,% Absence Our sunflower oil corresponds to the Premium grade. Ideal for frying and for salads. This is a good nutritious food product rich in vitamin E, as it is produced by cold pressing without chemical extraction. In the refining process, chemical solvents are also not used, which leaves the oil even after refining very rich in vitamins and vegetable fats with a minimum oxidation index, which gives an shelf life of up to 18 months. I am sure you will be glad to have in your arsenal our competitive oil at a price corresponding to quality.
Used cooking oil Measurements shall be carried out after extraction from the lower part. 1) Total acid number - Less than 5 (Test Method - KS M ISO 6618) 2) Iodine water - g 12/100g (Test Method - KS M ISO 12937) 3) Water and Sediment - Weight % -More than 100 (Test Method - KS H ISO 3961) Water average: Lower layer result x 0.05 + Upper layer result x 0.95 FFA: Max 5% MI&U: Max 2% Iodine Value: min. 90 Sulfur: less than 30ppm
GENERAL TECHNICAL SPECIFICATION SOYBEAN OIL Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
GENERAL TECHNICAL SPECIFICATION Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Grains like corn, corn gluten meal, ddgs, soybeans, soybean meal, soy hull pellets, canola meal and pellets, cotton seeds and meal, and wheat, conventional or organic (non gmo), dairy products, frozen meats and seafood, plastic scraps, fish meal, fish oil, whey powder, flax seeds, beet pulp pellets, meat and bone meal, poultry meal, feed, 3d printers, beans, peas, nuts.Commodities brokerage firm
