1). Use super heat conduction pipe and has a good effect of heat exchange. 2). No water in the vacuum tube, so the tube will not break in the winter. 3). Material of collector is stainless steel. Hail restistance is 25mm. 4). Pressure resistance: 0.8mpa
The characteristic of heat pipe collector 1) the water is heated by the heat pipe rapidly. 2) there is no water in the vacuum tube, so the tube will not break in the winter. 3) it can be combined with the architecture perfectly. 4) it can be combined with existing pipeline. 5) it will be affected by the local water quality, it doesn't suit hard water. 6) it can be still operate in the event of occasional tube breakages.
Heat pipe vacuum tube technical parameter Model: hp58/1800-20 l / 0.43 mm Outer tank material/thickness: sgcd/ 0.5mm Angle of collector: 25-85 ¡ã Rated pressure: 0.7mpa Heat pipe material: copper; 14/24 mm condenser diameter, 1800 mm pipe length. Insulation material and thinness: polyurethane foam, 50 mm Seal: silicon rubber polymer Manifold material: aluminum alloy Tank capacity: 100, 150, 180, 200, 250, 300 lite Advantages: 1. Adopts red copper channel, with great performance of heat exchange 2. Utilize copper heat pipes containing special medium liquid with low boiling point. 3. Work well in all climate, can be function well even in ambient temperature 4. Each heat pipe tube works independent and efficiently and easy to change if necessary. 5. No water flows inside the vacuum tube, no risk of freezing. Working principle: 1. Solar absorption: solar radiation is absorbed by the evacuated vacuum tubes and converted into heat. 2. Solar heat transfer: heat pipes conduct the heat from within the solar tube up to header. 3. Solar energy storage: water or water mix is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oc / 9-18of. Throughout the day, the water in the storage tank is gradually heated. Packing :standard export carton with foam or wooden box Delivery: 10-15 working days We offer products which are designed with your specific requirement in mind. Package: standard cartoon box Min order: 2 pieces
Detailed Specifications: 1. Quantity of tube: 15pcs 2. Absorber Area: 1.95 m2 3. Daily output: 110-150L 4. Manifold: Aluminum Alloy with plastic coated with 1.5mm 5. Pipeline: Material: Red copper; Diameter: 35mm; Thickness: 1.0mm 6. Copper pipe: TP2 copper; Diameter: 8mm; Thickness: 0.6mm 7. Heat preservation Layer: Polyurethane integral foaming with 40mm 8. Support frame: Aluminum Alloy \ hot zincification steel with 1.5mm 9. Work pressure: 0.6Mpa 10. Certification: CE, ISO9001: 2000, CCC export carton
Heat pipe solar collector 1) reliable and efficient twin-glass solar tubes; 2) copper heat pipes for rapid heat transfer; 3) easy plug-in installation; 4) free maintenance; 5) suitable for mains pressure water (up to 8 bar/116psi); 6) corrosion resistant silver brazed copper header; 7) aluminum frame; 8) powder coated (black, brown or silver) aluminum casing; 9) stable solar conversion during the day; 10) the perfect solar collector for domestic solar water heater systems; 11) ideal for commercial solar water heating applications.
Heat pipe solar collector Tech data: 1. Manifold casing materials:galvanized steel, aluminum alloy or stainless steel;sliver or black;insulation: rock wool or puf. 2. Header pipe materials:copper tu2, 1.0mm thickness and 35mm diameter. 3. Vacuum tube heat pipe:copper, tu2; 8mm dia; 1700mm len.;condenser, dia, 14mm; single or double fins. 4. Frame material: galvanized steel, aluminum alloy or stainless steel. 5. Fame angle can modified according to the customers, requirement. 6. Manifold shape and size can be modified according to the customers, requirement. Characteristic: The heat pipe solar collector is connected with storage tank, electric control device, hot water mix unit and fittings for circulation and installation. The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat ex-changer and the vapor becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
Key points High performance evacuated tube collectors Can be mounted free-standing or on a pitched roof, easy to install, simple roof fixings Heat pipe - offer low maintenance No water in the vacuum tubes, no freezing problem in winter, can be used in cold area. One broken tube will not affect the function of the system. 3 years warranty, 20+ years lifespan Market leading efficiency/output Triple layer selective absorber coating, absorption coefficient 94% Evacuated tube outer tube thickness 1.8mm 14mm high conductivity heat pipe condenser, Nick-coated condenser surface. Aluminum frame, strong structure, light weight. High and constant pressure of polyurethane foaming technology ensure the outstanding insulation quality. Principle: Evacuated tube solar collector use evacuated tubes to absorb solar energy then transfer energy to heat pipe via aluminum fin, when heat pipe is heated and working liquid vaporize and rise to top of heat pipe condenser (condenser is inserted into the mainfold port inside the solar collector manifold), when the heat pipe condenser meet cold water flow inside the manifold port, the working liquid will cool down and fluidify return to the bottom of heat pipe, so time and time again repeat this process, finally cold water(glycol) inside the manifold port be heated. Technical data: Model BSSC-10 BSSC-12 BSSC-15 BSSSC-18 BSSC-20 BSSC-24 BSSC-30 No. of collector pipes 10 12 15 18 20 24 30 Gross area(m2) 1.68 1.99 2.52 2.95 3.24 3.84 3.84 Absorber surface(m2) 0.87 1.04 1.30 1.46 1.62 2.08 1.94
The heat pipe solar collector is one important part for the split pressurized solar system. This is consisted of great efficiency heat pipe and glass vacuum tube, with a great efficiency of heat collecting. This systems is mainly positioned on the roof or in the garden. And as this system is split with the water tank, so it's not heavy and looks very beautiful. This type system is now very popularly used in Europe, America and Australian countries. How it works The heat pipe solar collector absorbs solar heat mainly by the vacuum tube and the heat pipe. When the vacuum tube absorbs solar heat, it transfers the heat to the aluminum fin inside, and the aluminum fin is in good touch with the heat pipe, so it transfer the heat to the heat pipe. As soon as the heat pipe is heated, the liquid inside it will become steam and rise up to the condenser part, and release the heat to the water that goes through it, and then the steam will become liquid again and restart the circulation.
We supply specialized  manufactured Shell amp Tube Heat Exchangers amp Pressure Vessels Delivering superior quality products in minimum delivery time MOC we can supply in copper brass carbon steels stainless steels like SS304 SS310 SS316L copper alloys such as cupro nickel Admiralty amp Aluminum Brass and many other materials We can supply Heat Exchangers amp Pressure Vessels up to 40 Tons The product range includes the proprietary plate fin tube heat exchanger oil coolers inter coolers after coolers marine heat exchangers oil cooling systems condensers chillers economizers super feed heat exchangers receivers and surge drums This products are extensively used in oil and gas refineries air separation plants chemical steel refineries pharmaceutical industries air conditioning amprefrigeration plants heat treatment shops marine engines amp gear boxes induction furnaces machine tools diesel engine generating sets compressors power plant installations transformers hydraulic power packs food processing vegetable oil refining amp sugar industry etc We are supplying this with certifications such as U R amp NB Stamp from ASME ISO 90012008 quality certificates from LRQA and certifications from DGQA IRS NSIC etc This are all manufactured in Nondestructive testing such as Visual Inspection Liquid penetrant testing Radiographic testing Tube to Tube sheet Weld radiography Ultrasonic testing for raw material and welds Helium leak testing Bubble Leak testing Magnetic particle testing
Morish India designs and manufactures â??Shell & Tube Heat Exchangersâ?? which are the most widely and commonly used Heat Transfer Equipment in many industries. TYPE-Fixed Tube Sheet, Removable tube Bundle CAPAICITY- As per user requirements SHELL DIA- 4 Inch To 50 Inch SHELL LENGTH- Max 120 Inch TUBES-Plain, Corrugated, Integrally Finned
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
Model Number: Portable Air Conditioner ((WT-F26 gray) Power Type: DC Use: Room Condition: New After-sales Service Provided: None Warranty:1 year Type: PORTABLE Certification:CB, ce Cooling/Heating:Cooling Only Application:Car, Commercial, Garage, Hotel, Household, Outdoor, RV Power Source:Electric, usb Remote Control: Yes App-Controlled: Yes
Product:Pipes Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.5, based on 177 reviews price:Start from 20 USD ASTM Pipes, UNS NO S 31803 , S 32205 , S 32750, S 32760 , ASTM B861, ASTM B862, ASTM B338 High Nickel Alloy Pipes, supplier. RFP India is India's well-known manufacturer, supplier and exporter of Pipes, which is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members. We offer different forms of pipes such as Round, Square, Rectangular, Hydraulic and so on, along with having in different length such as Single Random, Bevelled End, Treaded and more. Pipe is made in many. Materials including ceramic, fiberglass, many metals, concrete and plastic, and their sizes can be confusing because the terminology may relate to historical dimensions.
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
We deals Galvanized Steel Pipes used for Agriculture and Irrigations, Water Pipeline, Road Barriers. In addition to round pipes, we can also supply galvanized pipes in square and rectangular sections.Hot Dip Galvanized pipes in sizes from 1/2" To 6 OD and in wall thickness ranging from 1MM to 6MM. Our company is specializing in the galvanized pipes, welded pipes and other pipes. Surface hot dipped galvanized, Pre-gavanized, electro galvanized, painted, threaded, beveled, grooved, engraved Usage Scaffolding pipe, Structure pipe, Fence/Door pipe, Furniture, Lowpressure fluid pipe for water oil or gas, Boiler pipe.