GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Arij Global Trading & Marketing supplies both Ground Granulated Blast Furnace Slag (GGBFS) and Granulated Blast Furnace Slag (GBFS). In order to receive the specification of White Cement plus its price, please let us know. We will be there for your business.
Ground Granulated Blast Furnace Slag (ggbfs), Slag Powder.
Ground granulated blast furnace slag/GGBFS/GGBFS Powder The GGBFS Powder that we export complies with standard of BS 6699. Physical and Chemical properties: Glass content: 98.7% Cement fineness: more than 450m2/kg Density: 2.89g/cm3 CaO: 38.6% SiO2: 34.48% MgO: 9.22% Al2O3: 14.49% Moisture content: 0.1% Chloride: 0.035% Sulphate: 0.16% SiO2+ CaO+ MgO: 82.1% (CaO+ MgO)/ SiO2: 1.4 CaO/ SiO2: 1.1 Mortar compressive strength: 13.5N/mm2 for 3 days, 32.5 N/mm2 for 7 days, 60 N/mm2 for 28 days Activity index: 58% for 3 days, 83% for 7 days, 106% for 28 days. Minimum Order Quantity: 1000 T Supply ability: 80,000 T per month Package: 1.5 tons per pp bag or bulk packing Function: High strength, the faster of condensation and induration, good frost resistance and good workability Sphere of application: Applicable to important structure of high strength concrete and prestressed concrete engineering, such as high-rise building, high-grade highways, bridges, etc.
Ground granulated blast furnace slag/GGBFS/GGBFS Powder The GGBFS Powder that we export complies with standard of BS 6699. Physical and Chemical properties: SO3: 0.08% MgO:12.36% Mn2O3: 1.26% Insoluble Residue: 0.1% Moisture content: 0.02% L.O.I: 0.14% Cl-: 0.026% SiO2+ CaO+ MgO: 82.71% (CaO+ MgO)/ SiO2: 1.34 CaO/ SiO2: 1.00 Mortar compressive strength: 13.5N/mm2 for 3 days, 32.5 N/mm2 for 7 days, 60 N/mm2 for 28 days Activity index: 58% for 3 days, 83% for 7 days, 106% for 28 days Minimum Order Quantity: 1000 T Supply ability: 50,000 T per month Package: 1.5 tons per pp bag Function: High strength, the faster of condensation and induration, good frost resistance and good workability Sphere of application: Applicable to important structure of high strength concrete and prestressed concrete engineering, such as high-rise building, high-grade highways, bridges, etc. Our company established in 1995, and has become one of the biggest company dealing with the export of¨¢GGBFS and GBFS in north China. We are glad to cooperate with friends all over the world. 1.5 tons per jumbo bag
Welcome to Gremlog Trading DMCC, your premier source for high-quality slag material. As a leading name in the distribution of industrial materials, we pride ourselves on offering superior products that meet the diverse needs of our global clientele. Slag, often referred to by various names such as clinker, dross, fly ash, or ground granulated blast furnace slag (GGBFS), is a valuable by-product of metal smelting processes, particularly from steel and iron production. This versatile material has a wide range of applications, making it an essential component in various industries. From construction and road building to cement production and environmental remediation, slag's unique properties enhance durability, strength, and sustainability.
Physical and Chemical properties: SiO2: 33.42% CaO: 40.15% MgO: 8.35% Fe2O3: 0.93% Al2o3: 14.69% TiO2: 0.63% SO3: 0.10% MnO: 0.34% Moisture: 10% General Basicity: 1.99% Active index: 63% for 3 days, 80% for 7 days, 105% for 28 days Minimum Order Quantity: 1000 T Supply ability: 100,000 T per month Package: in bulk Delivery time: less than one week, or according to the quantity.
Granulated blast furnace slag (GBFS), ground granulated blast furnace slag (GGBFS), fly ash, vanadiam titanium pallet.
Ground granulated blast furnace slag (ggbfs), granulated blast furnace slag (gbfs), fly ash.
Blast Furnace Slag is a by-product of the manufacturing of steel in a blast furnace. Initially, in its molten form, it is diverted to a granulator where it is quenched with water and rapidly cooled to form glassy, non-metallic granules which are silicates and aluminosilicates of calcium. These granules are dried to produce Granulated Blast Furnace Slag (GBFS) and then ground to a suitable fineness to produce Ground Granulated Blast Furnace Slag (GGBFS). When used as a cementitious material in concrete, GGBFS enhances long-term performance and durability characteristics while reducing life-cycle and maintenance costs.
Ground Granulated Blast Furnace Slag(GGBS or GGBFS) is obtained by quenching molten iron slag (a by-product of iron and steel-making) from a blast furnace in water or steam, to produce a glassy, granular product that is then dried and ground into a fine powder. For price, procedure and other details please contact us
Chemical composition of cold-bounded high-titanium pellet: Ingredient TiO2 TFe Al2O3 MgO SiO2 CaO V2O5 S P Content% 25-32 25-32.00 1.59 1.16 6.00 1.89 0.24 0.38 0.21 Main technical details of cold-bounded high-titanium pellet: Item Pressive Strength/ N Tumbling Index >6.3mm% Percent Reduction% RDI % Delatation % Index >2500 >75 >70
Coal fly ash; Grade 1/2/3; Standard GB1596-91; Large quantity and low price are available for you
Ground Granulated Blast Furnace Slag (GGBFS) is a by-product from the manufacture of Iron and a high-performance substitute to traditional cement that will rise the technical presentation of your application, improve its appearance and minimize its environmental impact. GGBS is used in combination with Portland cement to produce superior longer-lasting concrete. GGBS will improve performance in any situation, from housing to civil engineering applications. GGBFS also improves the concrete toughness, reduces preservation and repair costs, progresses workability and compression features, extensions compressive and flexural strengths, decreases cement and water consumption, advances concrete grading and also improves impermeability and water resistance. Arij Global Trading LLC is a professional Ground Granulated Blast Furnace Slag supplier. We are a global company operating in the fields of the mineral industry, trade, and logistics. Reliable and responsible entrepreneurship, combined with flexibility and innovative logistics solution, plus our motivated and skilled employees, our core proficiencies and efficient work processes, we continuously achieve an above-average value contribution. GGBFS Ground Granulated Blast Furnace Slag (GGBFS) is gained by grounding the Granulated Blast Furnace Slag into the desired fineness. This product is usually intended to be used in concrete either as an element of composite cement such as Blast furnace Cement/High Slag Blast Furnace Cement or as a straight addition to the concrete mix by the concrete producer. GBFS Granulated Blast Furnace Slag GBFS can be used like sand as an additional aggregate for building materials. Granulated Blast Furnace Slag is obtained by quickly chilling (quenching) the molten ash from the furnace with the help of water. Throughout this procedure, the slag becomes fragmented and changed into amorphous granules (glass).
Welcome to Gremlog Trading DMCC, your premier source for high-quality slag material. As a leading name in the distribution of industrial materials, we pride ourselves on offering superior products that meet the diverse needs of our global clientele. Slag, often referred to by various names such as clinker, dross, fly ash, or ground granulated blast furnace slag (GGBFS), is a valuable by-product of metal smelting processes, particularly from steel and iron production. This versatile material has a wide range of applications, making it an essential component in various industries. From construction and road building to cement production and environmental remediation, slag's unique properties enhance durability, strength, and sustainability
Welcome to Gremlog Trading DMCC, your premier source for high-quality slag material. As a leading name in the distribution of industrial materials, we pride ourselves on offering superior products that meet the diverse needs of our global clientele. Slag, often referred to by various names such as clinker, dross, fly ash, or ground granulated blast furnace slag (GGBFS), is a valuable by-product of metal smelting processes, particularly from steel and iron production. This versatile material has a wide range of applications, making it an essential component in various industries. From construction and road building to cement production and environmental remediation, slag;s unique properties enhance durability, strength, and sustainability.
Features Of Granulated Blast Furnace Slag (GBFS) Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack. This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.
Fly ash, pond ash, ready mix plaster, red oxide, gypsum plaster, ground granulated blast furnace slag (ggbfs), lime powder, copper slag, aac blocks, clc blocks, fly ash bricks, silica sand, cement.
Ground granulated blast furnace slag (GGBS or GGBFS), quartz, red oxide, manganese oxide, barites, quick lime, gypsum, ramming mass.