1.System: Gps Gps+glonass Gps+bds(beidou) 2.Solution: Mediatek Ublox Mstar 3.Dimension: W/o antenna:1009, 1513, 1612, 1613, 2217 Without antenna:2118, 2020, 2925, 3030
GPS + GLONASS Receivers (G-Mouse) - UART / TTL Interface GPS + GLONASS Receivers (G-Mouse) - RS232 Interface GPS + GLONASS Receivers (G-Mouse) - USB Interface GPS + BeiDou Receivers (G-Mouse) - UART / TTL Interface
YIC5 series GPS/QZSS + GLONASS modules - MediaTek chip solution YIC3 series GPS/QZSS + GLONASS modules - GOKE chip solution YIC9 series GPS/QZSS + GLONASS modules - ublox chip solution YIC7 series Ultra Low Power L1 GPS/QZSS + GLONASS modules YIC5 series Ultra Low Power Sub-1 Meter L1 + L5 GNSS modules YIC5 series L1+L5 NavIC(IRNSS) GNSS modules YIC5 series L1+L5 Dead Reckoning GNSS modules YIC5 series GPS/QZSS + BeiDou modules - MediaTek chip solution YIC9 series GPS/QZSS + BeiDou modules - ublox chip solution YIC5 series GPS/QZSS modules - MediaTek chip solution YIC9 series GPS/QZSS modules - ublox chip solution
The DS-354 utilized SiRFstarV â?¢ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance â?¢ GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy â?¢ High sensitivity navigation engine (PVT) tracks as low as GPS : -165dBm, GLONASS : - 161dBm â?¢ 52 track verification channels â?¢ SBAS (WAAS or EGNOS,MSAS) â?¢ Active Jammer Remover, removes in-band jammers up to 80 dB-Hz â?¢ Tracks up to 8 CW jammers â?¢ Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) â?? Need operator support â?¢ Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. â?¢ SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. â?¢ Reacquisition Time: 0.1 second â?¢ RF Metal Shield for best performance in noisy environments Hardware and Software â?¢ Based on the high performance features of SiRFstarVâ?¢ low power single core logic. â?¢ Adaptive micropower controller â?¢ Only 50 to 500�¼A maintains hot start capability (core logic) â?¢ < 10mW required for TricklePowerâ?¢ mode â?¢ RoHS compliant (lead-free) â?¢ Advanced navigation features â?¢ Smart sensor supported by I�²C interface â?¢ External interrupt input for context change detection â?¢ MMCX RF Connector â?¢ Dimension : 36 x 24 x 10.5 mm
Frequency range:Gps l1/l2, glonass l1/l2, galileo e5a/e5b/e6 bds b1/b2 Polarization:Rhcp Connector:Tnc-k Impedance:50 ohm Axial ratio:=3db Azimuth coverage:360° Gain at zenith:=5dbi Lna gain:42db Dimension:145*58mm
Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes position power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by IC interface - External interrupt input for context change detection - Dimension : 20 x 20 x 7 ± 0.5mm Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware technology - Support adaptive Micro Power Controller power management mode. - < 10mW TricklePower, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.
Built-in BY682E GNSS high-precision positioning and heading board, support BDS: B1, B2; GPS: L1, L2C, L2P; GLONASS: G1, G2; QZSS: L1, L2; Support single-system or multi-system joint solution; Embed new generation of RTK algorithm engine, more intelligent built-in algorithms and more efficient RTK solutions; Support three vector RTK solution to further optimize the stability of positioning and heading under dynamic conditions; 9~36V wide voltage input with overcurrent and reverse connection protection; Two RS232 serial ports and one RJ54 ethernet port.
GPS/GNSS/GALILEO/BDS Module The Ct-G153 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) - Need operator support - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds - SiRFGeoRecovTM Reverse EE makes positioning process being done under power-saving mode. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high-performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I2C interface - External interrupt input for context change detection - Dimension : 11.2 x 10 x 2.3 mm
SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarVâ?¢ low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
YIC5 series GPS/QZSS + GLONASS antenna modules - MTK chip solution YIC3 series GPS/QZSS + GLONASS antenna modules - GOKE chip solution YIC9 series GPS/QZSS + GLONASS antenna modules - ublox chip solution YIC7 series Ultra Low Power GPS/QZSS + GLONASS antenna modules YIC5 series GPS/QZSS + BeiDou antenna modules - MTK chip solution YIC9 series GPS/QZSS + BeiDou antenna modules - ublox chip solution YIC5 series GPS/QZSS antenna modules - MTK chip solution YIC9 series GPS/QZSS antenna modules - ublox chip solution
GPS Mouse provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the GPS Mouse U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.
Connector: USB 2.0 Type A male U-blox UBX-8030 GNSS Chipset Frequency: GPS: L1, 1575.4200MHz Accepts the signals of up to 71 satellites at the same time Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG Auto Baud Rate up to 115200 bps Update rate: Single GNSS: 10 Hz (e.g. GPS solo) Sensibility max 167 dBm PIX6 protection class Magnetics, non-slip on the bottom LED-indicator for GPS-status Operating temperature: -35Ë? C ~80Ë? C Power Supply: 5 Volt Current consumption: max 45 mA Cold start in ca. 26 seconds Hot start in ca. 1 second Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS Cable Length: ca. 1.5m Dimension (L x W x H): ca. 52 x 52 x 22 mm
SiRF Star III High Performance GPS chipset High sensitivity (Tracking Sensitivity: -159 dBm) Extremely fast TTFF (Time To First Fix) at low signal level Support NMEA 0183 data protocol Built-in SuperCap to reserve system data for rapid satellite acquisition Built-in patch antenna Super-cohesive magnetic for mounting on the car USB interface connection port Waterproof and non-slip on the bottom Delicate Designed Gift Box.
Product Name Android MiniPOS Aisino A80 OS Android 7.1 Secure operating system Processor 32-bit, Quad-core, 1.1Ghz application processor High performance secure processor Memory RAM: 1GB (optional 2GB) ROM: 8GB (optional 16GB) Display 5 Color screen 1280 720 Touch Screen Capacitive touchscreen Keys 1 Power key 1 Function key 3 Touch keys WIFI 2.4GHz IEEE802.11b/g/n Communications 4G 3G 2G Bluetooth BT 4.X Card Readers IC card reader NFC reader Camera 2 MP Rear Camera 1D/2D barcode scan Optional: 5MP rear zoom camera GNSS GPS GLONASS BeiDou Indicator Lights 4 NFC LEDs 1 Charging indicator Audio Speaker Microphone Card Slots 1 SIM 2 PSAM Battery 3.85V/3000mAh Dimensions 150 75 16mm L W H Weight 220g Peripheral Port 1 USB OTG, Type-C, 5V Environmental Operating temperature: 0 ~ 50 Storage temperature-20 ~ 70 Relative humidity 5%~95%, Non-condensing Optional Configurations ASD18 Bluetooth Printer Docking Station
New features in gms-d1: Ultra-small form factor, 13 x 10 x 2.1 mm Ultra-high sensitivity, -165dbm L1 frequency, c/a code, 66-channels satellite searching Agps support for fast positioning (offline mode: epi valid up to 14 days) Dgps (waas/egnos/masa/gagan) support Multi-path detection and compensation E-gsm-900 band rejection E911 compliance Usb interface support High update rate, up to 10 hz Magnetic variation function support Low power consumption, low shut-down current consumption Rohs compliant.
GPS/GNSS/GALILEO/SBAS Module The Ct-G354 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm 52 track verification channels SBAS (WAAS or EGNOS,MSAS) Active Jammer Remover, removes in-band jammers up to 80 dB-Hz Tracks up to 8 CW jammers Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) �?�¢?? Need operator support Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. Reacquisition Time: 0.1 second RF Metal Shield for best performance in noisy environments Hardware and Software Based on the high performance features of SiRFstarV low power single core logic. Adaptive micropower controller Only 50 to 500�¯�¿�½?�?�¼A maintains hot start capability (core logic) < 10mW required for TricklePower mode RoHS compliant (lead-free) Advanced navigation features Smart sensor supported by interface External interrupt input for context change detection MMCX RF Connector Dimension : 3
Ct-G340 S5 of products utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Advanced low power technology means there is no need to maintain full power to achieve maximum performance nor turning the GNSS receiver completely off to save power. It breaks then old GNSS performance vs. power trade-off through the fusion of a new high-performance GNSS engine, advanced power management and a smart sensor interface to achieve high sensitivity hot-start conditions for fast location fixes. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic)
GPS Tracking for Android4.22 GPS GSM GPRS Module Fleet Management Solution Feature: Vehicle financing Vehicle maintenance Vehicle telematics (tracking and diagnostics) Driver management Speed management Fuel management Safety management Specification: LCD: 7" with touch panel, 800*480. ARM: Allwinner A20 Nand Flash: 4G Byte DDR3 Memory: 1GB Wifi module: RTL8723AS VAU GPS module: GB1612 Wireless communication GSM module: UC15 Built-in speaker: 2W 8ohm, Size:40mm Support SIM Card Support SD Card and TF Card: 128M-32GB Built-in GPS Antenna and GSM Antenna; Optional external GPS Antenna Built-in Battery: Polymer Li-Ion Battery 3.7V@1200mAH Support UART: * 2 Support RS485: * 1 Support CVBS input: * 4 Support External Key Support USB2.0(host): * 2 Support USB2.0(Device): * 1 Support output : * 1 Support input : * 3 Operating System(OS): Android 4.22 Accessories: * Extended cable * Touch pen * Operation manual * Bracket * SD card(optional) Size: 20*12*2cm Weight: 1.5KG
DS-GM451 U8 is a GPS Mouse receiver build-in well-known Ublox 8 GPS chipset. DS-GM451 U8 provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the DS-GM451 U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.
SiRF Star III High Performance GPS chipset High sensitivity (Tracking Sensitivity: -159 dBm) Extremely fast TTFF (Time To First Fix) at low signal level Support NMEA 0183 data protocol Built-in SuperCap to reserve system data for rapid satellite acquisition Built-in patch antenna Super-cohesive magnetic for mounting on the car RS232 interface connection port Waterproof and non-slip on the bottom. Delicate Designed Gift Box.