Main purpose: GX-P series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purposes, interior decorations, furniture appliances, instrumentation, lamp, etc. Main technical Features: Glass sheet size: Max size 3500 x 12000(mm).Min size 60 X 60(mm): High quality and product: Up to GB9963, GB9656, ECER43, ANSIZ97.1 standards: Broad applicability: Float glass, coated glass, rolled patterned glass; Advanced heating methods: Radiation/convection matrix heating optional with intelligent heating control system: Lower energy wasting: Continue produce and tempering, reduce energy wastering; Easy operation: User-friendly interface, whole produce with auto-control; Full date storage: Computer-stored glass-type parameter recipes for full range of glass types. Suit for sea transportation
Xinology GTF Series Glass Tempering Furnaces Are Used To Induce Stress On Glass Surfaces By Thermal Process This type of furnace is also named as glass thermally tempering furnace. Glass strength is increased compared with ordinary glass. Tempered, or also known as toughened glass, will usually shatter into small fragments instead of sharp shards when broken. These small cuboid fragments are less likely to cause injury. Xinology glass tempering furnaces also produce heat strengthened glass or also known as half tempered glass which shatters in big clusters.
Heaters for glass tempering furnace. Heaters of Northglass furnace 7kw,14kw.
The glass tempering furnace is used to manufacture flat and bending tempered glass for furniture, car, architecture glass, etc.
The furnace includes loading table, heating section , quenching and cooling section, unloading table, and control system. It is used to manufacture flat and bending tempered glass for furniture, home appliance, architecture glass, etc.
Our company is a enterprise of committing to the ultra-thin glass tempering,we own a fan Institute and a furnace Institute, and now,we researched and developed a new series of energy-saving,high efficiency, low noise,low temperature fans,is a great breakthrough of the ultra-thin glass tempering technology , so that,the development of the ultra-thin glass tempering furnaces stepped a new stair, at present, our companyâ?? furnaces can continuously produce the large size of 2.5mm ultra-thin glass, and won a number of national patents.At the same time, our company also provides various types of wind machines, can be applicable in many fields, can meet vairous of production requirements. In addition,we also can transfer the technology of the ultra-thin glass tempering furnaces to make a cooperation,have a common development.
Main use: Gx-p series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purpose, interior decoration, furniture appliances, instrumentation, lamp, etc. Main technical features: Glass sheet size: max size 3500*12000(mm), min size 60*60mm Perfect processing quality: comply with gb9963, gb9656, ecer43, ansiz97.1 standards; Broad glass processing applicability: float glass, coated glass, roddle patterned glass; Advanced heating methods: radiation/convection matrix heating optional with intelligent heating control system; Lower energy consumption: continuous production and tempering, energy saving; Easy operation: user-friendly inteface, self diagnosis, achieving auto-control in whole process Convenient datea storage: mass storage device, applicalbe for industrallized production and management.
Main use: Mianly used to produce the tempering glass for facades of building, curtain walls, household furniture, etc. Main technological features: 1, the furnace has two chambers, one for preheating and the other for heating.Due to this, the heating efficiency is higher and the productivity is 1.4-1.8 times than that of the single-chambered furnace. 2, an independent heating source is separately fixed onto the preheating chamber and the tempering furnace. Glass enters teh preheating chamber and then the tempering furnace to get heated. 3, glass will get preheated during the preheating section, which could ensure the glass be heated more evenly and increase the finished product rate.
Main use: Gx-sq series hyperboloidal glass tempering furnace is the new product of gangxin corporation, it's mainly used to produce the tempered glass for sidelites, back window of high-grade automobiles, and the home appliances, facedes of building, etc. Main technological features: 1, forming under high temperature more precisely with spherical surface more smooth and perfect. 2, with low-cost mould-made process, it's fast and convenient to make the replacement. 3, it achieves the completely automatic control in whole production, has slef-diagnosis capacity and comfortable human-machine interface, offers the production software based on 2 working stations or 3 working stations.
Main use: This tempering furnace is mainly used to process different kinds of low-e glass, coated glass, printed glass, auto safety glass, architectural glass, decorating glass and aircraft glass , etc. Sorting of products: This machine works on the basis of the convection heating theory and adopts convection blower with sepcial design, unique structure of hot air circulationi and various advanced technologies as well, which greatly increases the glass heating speed. The production efficiency and teh quality have been highly promoted. Its has the unparalleled advantages to process teh low-e glass and is applied to various gx series tempering furnace. Main charactreistics of technologies: 1, 25% higher productivity compared with common radiation furnace 2, heating more evenly, faster, controlling more precisely 3, min low-e value equal or greater than 0.03 when processing low-e glass.
Mainly used to produce the tempered glass for solar panel, domestic cabinet freezer, microwave oven, showcase, kitchen stove and furnitures, etc. Glass doesn't reciporacate in the furnace, instead, it continuously moves into the furnace for quenching and tempering, this will help to reduce the energy comsumption. The super production capacity is several times higher than the reciporacating tempering furnace.
Main use: Mainly used to produce the flat/bent tempered glass for sidelites of automobiles and boats, showerroom, facades of buildings, domestic appliances, furniture, etc. Main technological features: One machine, multi-uses; apply to both flat tempered glass production and bent tempered glass production. Flexible and convenient: multi types available to chose, you can choose the best combination according to the workshop's condition.
1. The raw materials adopt high purity fused silica ceramics, which provides smallest coefficient of thermal expansion.It runs stably and reliably under high temperature with good thermal shock resistance. 2. Advanced processing and completing sets of equipments with high performance guarantee the surace quality of rollers and smaller radial jumping. 3. Rollers features in high surface hardness,wear resistance and strong durability. 4. The original design of steel toe construct won't be loosening or dropping. 5. Steel toe adopts galvanization technology, which is rust protection, beautiful and durable. 6. Strictly examine serial numbers one to trace quality. According to the requirements, in case.
Product details Gx-qdlpseries force convection glass tempering furnace is mainly used to produce refinforced glass of high quality use as windows of vehicles, low-e glass, coate glass, print glass, architecture, aircrafts or for decoration glass. This machine works on the basis of the convection heating theory and adopts convection blower with special design, unique structure of hot air circulation and various advanced technologies as well, which greatly increase the glass heating speed. The production efficiency is increased and the quality of products is improved, especially with unparalleled advantage in processing low-e glass. This machine is applied to all kinds of gx series tempering furnace Gx-qdlpy series forced convection glass tempering furnace for flat & bend parameters Model flatmax.Size (mm) flatmin.Size (mm) bendingmax.Size (mm) bendingmin.Size (mm) min.R (mm) flat productivity(m2/h) bend productivity(batch/h) thickness (mm) installed power Kw In nude, but can packing as customer required
JHG tempered glass is from 2-25mm , sizes from 100x100mm to 18000x3300mm . The tempered glass is widely used for fence , furniture ,window, shower door ,curtain wall , floor .
Glass tempering furnace.Old glass tempering furnace renovation
This series product is flat glass and bent tempered glass production combined vertical and horizontal steel furnace, mainly for the production of architectural curtain wall, various modes of transport windshield, side windows, shower room, home appliances, with flat or bent tempered glass production. ÐͺÅModel ×î´ó¼Ó¹¤³ß´çMax.Bending Size(mm) ×îС¼Ó¹¤³ß´çMin.Bending Size(mm) ×îС¼Ó¹¤°ë¾¶Min.processing radius(mm) ÇúÂʰ뾶Curvature radius(mm) ºThickness(mm) ²úÁ¿Capacity (batch/h) QYP-H2010 1000¡Á2000 400¡Á300 ¡Ý450 4-12 16 QYP-H2012 1200¡Á2000 400¡Á400 ¡Ý600 4-12 16 QYP-H2410 1000¡Á2440 500¡Á500 ¡Ý450 4-12 16 QYP-H2412 1200¡Á2440 500¡Á500 ¡Ý600 4-12 16 QYP-Z3620 3660¡Á2000 400¡Á400 600 450 4-12 16 QYP-Z3624 3660¡Á2440 400¡Á400 850 350 5-12 16 QYP-Z4224 4220¡Á2440 600¡Á600 850 350 5-12 16. Note: The output of the largest piece of glass in accordance with 5mm single-station production of 100% finished product rate. Flat steel production may refer to the former flat steel-based series, will not produce changes. packing:wooden boxes
JHG offer 3-5mm from 90-98% LT glass with rectangular sizes, shape sizes for greenhouse,hobby glass house. JHG may offer different greenhouse glass items: Tempered low iron glass 91+ Tempered clear glass 89+ Tempered AR glass� 95+ Tempered diffuse glass with 30-75 Haze Greenhouse Glass Advantage: Durability, Glass is the strongest of all greenhouse materials Becautiful Appearance. High light transmission, high UV available Shatter-Resistant
It is processed by controlled thermal or chemical treatments to increase its strength compared with normal glass, about four times stronger than annealed, glass. When broken, tempered glass fractures into small, relatively harmless pieces, it is widen used for window, door, railing, furniture, vehicle.
Mainly used in the production of various modes of transport windshield, side windows, shower room, construction, household appliances and so on with the production of curved toughened glass. Note: The table dimensions are in millimeters as a unit, yield 80% according to 5mm glass loading rate was 100% finished product rate, the glass can cause changes in the thickness of the scope of production change. Model Max.Bending Size ×îС¹æ¸ñMin.Bending Size ÇúÂʰ뾶 Curvature radius ºñ¶È Thickness ²úÁ¿(Åú/Сʱ) Beding Capacity (Approved /Hour) QYP-H2010 1000¡Á2000 400¡Á300 450 4-12 16 QYP-H2012 1200¡Á2000 400¡Á400 600 4-12 16 QYP-H2410 1000¡Á2440 500¡Á500 450 4-12 16 QYP-H2412 1200¡Á2440 500¡Á500 600 4-12 16. Packing:wooden boxes.
