Product Name : Furnace Oil Product Description : DENSITY 0.90-0.95 Price of product ( USD price or FOB price) : CFR MUNDRA/NEVASHEVA USD 320-330 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details Flexi Containers
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
Fuel oil ( containing some solvent) Fuel oil ( free from solvent) Diesel off spec ( Dark color) Diesel off spec ( mild yellow color)
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Features Of Granulated Blast Furnace Slag (GBFS) Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack. This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.
Trading and exporters of high quality industrial, ovens, furnaces and Dryers, such as Brazing furnaces, Sintering Furnaces, Annealing Furnaces & all types of furnaces spares parts.
This furnace is designed for thick film products firing, such as Hybrid IC, chip-R, SMD components terminal, LTCC, Stainless steel heater, PV thin film cell and other similar products. Temperature Range: Belt Material: Cr20Ni80 Firing Atmosphere: Dry and clean Compressed air. Heating Element heating board Cooling Mode: fan cooling. Temperature Zone: 6 Zones. Chamber Temperature Uniformity: Overall Dimension:
GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.
Heat Area - 100m2 Dimension(W*H*D) - 450*975*782mm Weight - 70kg Air inlet pipe - 50mm Air outlet pipe - 80mm Auto-burning Time - 13h-27h Fuel Consumption - 0.8-1.8kg/h Efficiency - 90% Hopper Capacity - 20kg Electronic consumption - 100-400w/h Rating voltage - 230v
The most powerful commercial condensing boiler in the world, the E-Compact Twist is available in a wide range of outputs of 25kW up to 150kW, and is ideal for business owners who are looking to run a more energy-efficient business. The only condensing pellet boiler in the world with a single heat exchanger, the E-Compact Twist condensing boiler can achieve efficiencies of up to 103%.
Steam Boiler Supply
Reboiler
Bioreactor
About THE Product : Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement). Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications. Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties. Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste. Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water. Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium. GBFS : (Granulated Blast Furnace Slag) Source : Granulated BF Slag From Gujarat State, India Supply Quantity : 50,000 Metric Tons Per Month Packing: Bulk Parameters (% BY MASS) CaO 30-38 Al2O3 15-20 SiO2 30-40 Glass Content 85-97 MgO 8-11 Fe2O3 0.5-1.5 Moisture 10 MAX Size -5mm Min 95, +5 mm Max 5 Relative Gravity 2.9 Bulk Density(Bagged) 1200 KG/M3
Arc furnace, induction furnace, melting furnace -
Hyontec sf system curing furnace is widely applied to the surface drying and curing of the zinc-flake coating, alloy coating and outstanding sealant on electroplating industry. These are some reasons hyontec sf system is the no. 1 choice for the application of all above coatings. 1) dismounting & installation conveniently Both belt curing furnace and curing oven can supplied for you by your requirements Container
We have stock of 400 MT Furnace Oil for sale
Burnout Furnace Model No.: HJ-1130 FEATURE Jewelry Mold Making Equipment, mainly for stainless steel perforated flasks gypsum drying curing, wax melting & separation, dewax machine. SPECIFICATIONS Model No. HJ-1130A HJ-1130B HJ-1130C HJ-1130G Voltage 220V, 50/60Hz 220V, 50/60Hz 220V, 50/60Hz 220V, 50/60Hz Power 3KW 5KW 6KW 2KW Capacity (4"x9" flasks) 4pcs 6pcs 9pcs 2pcs Program Common (1 stage) / Programmable Common (1 stage) / Programmable Common (1 stage) / Programmable Common (1 stage) / Programmable Inner size 30x30x30cm 46X30X30cm 46x46x30cm 30X16X30cm External size 50x52x52.5cm 66x32x52.5cm 66x55x55cm 50x40x55cm Weight approx. 70kg approx. 90kg approx. 120kg approx. 55kg Max. Temp 1150°C 1150°C 1150°C 1150°C If you want to choose a professional Burnout Ovens Factory , you can email us. We are established in Shenzhen city in the year of 2004, specializing in manufacturing and marketing of casting & melting equipment, and Burnout Furnace, Ovens, and Digital Rotating Burnout Furnace which is committed to provide convenient and fast services to every of our customers worldwide.
DE-108 MUFFLE FURNACE RECTANGULAR ALTIS MAKE Specification- Light weight ceramic fibre wool insulation (instead of Brick insulation). The outer casting is made of double walled thick P.C.R.C. Sheet, duly painted Heating elements are made of KANTHAL "A-1" wire and backed by high temperature cerwool insulation, which avoids loss of energy. Temperature is controlled through Digital Temperature Indicator-cum-Controller. To work on 220/230 volts or 440/440 volts A.C. Maximum Temp. 1200 degree C and working Temp. 1150 degree C. MUFFLE SIZE- 200 x 100 x 100 mm, RATING- 1.0 KW MUFFLE SIZE- 250 x 125 x 125 mm RATING- 2.0 KW MUFFLE SIZE- 300 x 125 x 125 mm, RATING-2.5 KW MUFFLE SIZE- 300 x 150 x 150 mm, RATING-3.5 KW MUFFLE SIZE- 300 x 200 x 200 mm, RATING-4.0 KW MUFFLE SIZE- 350 x 175 x 125 mm, RATING-4.0 KW MUFFLE SIZE- 375 x 175 x 175 mm, RATING-4.5 KW MUFFLE SIZE- 475 x 175 x 175 mm, RATING- 5.0 KW
Features 1. Operation temperature: 1300°c (1400? for short time). 2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina Fiber ceramic insulation. 3. Heavy duty double layer structure with cooling fan. Lower temperature in outside case. 4. Pid automatic control via current limiting phase angle fired the resistor, e.G. Scr(silicon controlled rectifier). 5. Power control with 30 segments programmable. Descriptions Chamber size 200x200x200mm (8"x8"x8") Working temperature 1300? (continuous) Maximum temperature 1400? (for short time) Temperature control 30 steps programmable and pid automatic control Heating rate 0~15?/min (suggestion: =10?) Temperature accuracy +/-1? Heating element Silicon carbide heating element(sic) Working voltage Ac 220v, single phase, 60/50 hz (or according to your requirement) Max. Power Approx 4 kw Outside size 580x580x920mm Net weight 130kg The furnace chamber size can be customized.
