This type of EDJ fire pump system contains six parts which are electric fire pump, diesel engine driven pump, jockey pump, control panel, pipeline foundation and pressure tank. You can choose to have or not have pressure tank.
A brief introduction of EDJ Fire Pump System’s components
Diesel Engine Fire Pump
Have the standard of the national standard GB6245-98 "fire pump performance requirements and test methods" and the National Fire Protection Association Standard NFPA20 "centrifugal fire pump installation" and other standards.
The diesel engine fire pump is equipped with the characters of good and strong overload capacity, compact structure, easy to maintain and high degree of automation.
Altitude = 1000m; Ambient temperature: +5 °C ~ +40 °C; Relative humidity: = 90%
Electric Fire Pump
Apply to fire protection system, pressurized water pipes, industrial and urban water supply and drainage, water pressure high-rise building, long-distancewater, heating, bathrooms, boilers and well-being of the water cycle, pressurized water and air-conditioning cooling systems and other equipment supporting occasions.
Flow: 1~300L/s; Head: 0.15~1.6MPa; Power: 0.75~160/6P kW; Speed: 960~2900r/min; Working Pressure: =1.6MPa; Medium Temperature: =90°c; Material: HT200 (Bronze ally impeller)
Jockey Pump
The combination of advanced international and domestic technologies
The design and manufacture of the self-priming vertical multistage centrifugal pump
The adoption of standard vertical motor and fast loading type mechanical seal makes it convenient to change
Apply to mild corrosive medium and substitute the foreign CR, CRN and similar products.
High efficiency and energy saving and reliable quality
Flow rate: 4.2-504 m3 / h; Head: 24-240 m; Power: 1.5-450 kw; Speed: 1480 r/min; Caliber: f 40-phi 250; Temperature range: 0-+ 90 °C; Working pressure: more than 2.4 Mpa
Control Panel
Frequency conversion constant pressure control equipment: high efficiency and energy saving, perfect fault handling.
Fire pump control equipment: high and low level industry, civil building fire, spray, water curtain and other pumps’ control.
Submersible sewage pump control equipment: automatically control and protect of submersible sewage pump.
Air conditioning pump control equipment: control the pump in air condition system, bathhouse and swimming pools. And it’s also suitable for startup and control of alternating dynamo.
Pressure Tank: 24, 50, 100 Liters
Sop caliber: ª¦80mm;
Water exceeding caliger: ª¦65mm;
Maxinmum torque: 22hp/3600rpmú+
Way of starting : electric start
At rated pressure: 1400l/min/0.95map;
Priming time : ín20s;
Sucation head max: 7m
Electric fire pump is a kind of water supply device widely used in hospitals, shopping malls, office buildings and residential buildings in the middle and high-rise buildings, when an accidental fire, start the fire pump can ensure that the water pressure in the pipe network to meet the requirements of the fire extinguishing device, so that the fire is timely put out. In China, the fixed electric fire pump water supply system generally adopts the mode of one (or more) main pump with one (or more) standby pump, and is equipped with a special control cabinet to achieve the control of the fire pump.
UL/FM Approved 1000 Gallons Per Minute FIRE PUMP SYSTEM, 10 Bar,
Product : UL/FM Approved 1000 GPM FIRE PUMP SYSTEM
Brand : SFFECO (SAUDI FACTORY FOR FIRE EQUIPMENT CO.)
Condition : Brand New
YOM : 2023
Location : EXSTOCK, UAE.
â?¢ Price is inclusive for :
o Electric Pump Code SF-PMPULHESELEC092 â?? 1 SET
o Diesel Pump Code SF-PMPULHESDIES092 -1 SET
o Jockey Pump Code SF-PMPJOCKEY50HZ07 -1 SET
o Electric Pump Controller Code SF-PMPCPGPY50HZ11 -1 SET
o Diesel Pump Controller Code SF-PMPCPGPD02 -1 SET
o Jockey Pump Controller Code SF-PMPCPJP350HZ04 -1 SET
o Diesel tank Code SF-TANKDIESNONUL03 -1 SET
o Battery Code SF-PMPBAT150AH03 -4 SET
o Terminal Box SF-PMPST431 -1 SET
o Flow Meter Code SF-VLVFM008 -1 SET
o Pressure Relief Valve Code SF-PMPACCPRV02 -1* SET
o Waste Cone Code SF-WCFLG004 -1* SET
ITEM DESCRIPTION QTY COUNTRY OF ORIGIN
SFFECO-UL/FM APPROVED END SUCTION (SFP 1000-54 EM-2G) ELECTRIC MOTOR DRIVEN SKID PUMP 1000 GPM @ 10 BAR COUPLED WITH UL LISTED ODP MOTOR. SUCTION AND DISCHARGE PRESSURE GAUGES, AND CASING RELIEF VALVE ARE INCLUDED. 1 UAE
SFFECO-UL/FM APPROVED END SUCTION (SFP 1000-54 EM-2G) ENGINE DRIVEN SKID PUMP 1000 GPM @ 10 BAR COUPLED WITH UL/FM LISTED STALLION ENGINE. SUCTION AND DISCHARGE PRESSURE GAUGES ARE INCLUDED. 1 UAE
GMAX PUMP VERTICAL MULTISTAGE JOCKEY 5.5HP, 2900 RPM, 380/415V, 50HZ, GMAX MODEL GVR 8-120 WITH BASE INCLUDED. 1 UAE
CONTROL PANEL WITH NEMA2 ENCL. FOR ELECTRIC PUMP STAR DELTA OPEN STARTER MODEL GPY-125HP-50HZ-380/415V-3PH, TORNATECH. UL&FM APPROVED. 1 UAE
CONTROL PANEL WITH NEMA2 ENCL. FOR DIESEL PUMP MODEL GPD-24-220 TORNATECH. UL&FM APPROVED. 1 UAE
CONTROL PANEL WITH NEMA2 ENCL. FOR JOCKEY PUMP DOL STARTER MODEL JP3-5.5HP-50HZ-380/415V-3PH, TORNATECH. UL APPROVED. 1 UAE
SFFECO TANK DIESEL 150 GALLON CAPACITY CYLINDRICAL SINGLE WALL FACTORY STANDARD 1 UAE
BATTERY FOR DIESEL ENGINE DRIVEN PUMP FOR ENGINE CAPACITY 80HP AND ABOVE 4 KOREA
TERMINAL BOX 60-125 HP FIRE PUMP 1 UAE
FIRE PUMP FLOW METER SIZE 6" FM APPROVED FOR 1000 GPM TO 1250 GPM & BELOW 1 USA
The XBD-HS Series fire pump is designed as per NFPA20 standard, the pump is used to provide water to stand pipe, sprinkler, chemical mitigation and hydrant systems for fire suppression in industrial and commercial facilities. The performance is similar to Peerless AEF series
Product name :Split case fire pump (NFPA20 standard)
Item :electric driven, diesel dirven pump set
Features :
XBD series fire fighting pumps, including multistage pump, horizontal End suction pump, horizontal split casing pumps ,vertical inline pumps designed and manufactured in accordance with International Standard, can be motor powered and diesel powered, these pumps are ideal for fire fighting applications in harbors and wharfs, airports ), as well as ocean ships and industrial and civil high buildings.
Customer's requirements shall be tailored for higher capacities and pressure.
Data sheet :
Flow: up to 12300m3/h
Head: up to 200m
Speed: 1480r/min, 2950r/min (50HZ) 1750r/min, 3540r/min(60HZ)
Temperature: 105; max
Working pressure:2.5MPa
Application:
---Industrial and municipal water supply
---Chilled and condenser water circulating systems
---Water treatment plants
---Fire fighting
---Irrigation and sprinkler pumping stations
Borra Technology fire-fighting dual-powered unit consists of the combination of the motor pumping set and the engine pumping set, the system control cabinet, control instruments, and other relevant accessories. It keeps continuous water supply to the fire-fighting pipe network by presetting. The system has a beautiful appearance and all necessary parts are assembled before delivery, which can minimize the workload of users on-site and save the space of the pump room. Characteristics:
1. Three start modes: A. Manual start: switch between manual, automatic interlink by hand. B. automatic /manual mode: start fail to warn 5-10-15S; C. Emergency manual direct start: in failure, emergency manual start.
2. Main Parameter:
Flow:
Self-priming design (require initial priming to operate)
Suitable for general water transfer, irrigation, garden, mining and civil engineering
Forged strong cast iron pump body
Forged iron volute impeller
High quality ceramic plunger, silicon carbide water seal
Low oil consumption, low noise
Powered by advanced YARMAX engine, reliable performance, easy start
The portable/mobile/ hand-carried fire pump is composed of engine, priming device and centrifugal water pump. It�?�¢??s a kind of multi-purpose pump, mainly designed for fire fighting, suitable for fire fighting in fire rescue departments, professional fire brigades, industrial and mining enterprises, counties,villiages, towns, etc.It has more advantages on narrow roads or places where fire trucks could not reach. It also could be used for drain waterlogging, drought resistance,irrigation,etc. It�?�¢??s an ideal equipment for watering, water supply and emergency disaster relief.
Engine Model : Single,air-cooled,4-stroke,GX390
Displacement : 389ml
Max theoretical power :9.6kw /13HP
Pump body : Single stage
Fuel tank capacity: 6.5L
Oil capacity : 1.1L
Starting system: Recoil/electric start
Rated flow: 600L/min
Rated presure : 0.6mpa
Max suction depth : 7m
Priming type : Rotary vane vacuum pump
Priming time:less than10s
Pump head: 70m
Inlet :65mm
Outlet: 65mm
Weight : 63kg
Appearance size : 630*530*500
Features: Based on years of experience in the fire-fighting industry, our company has developed and designed this product, which perfectly solves the problem of noise pollution caused by the operation of a diesel fire-fighting pump.Performance parameter:Flow:
China emergency portable diesel fire fighting pump is composed of engine, priming device and centrifugal water pump. It's a kind of multi-purpose pump, mainly designed for fire fighting, suitable for fire fighting in fire rescue departments, professional fire brigades, industrial and mining enterprises, counties,villages, towns, etc.It has more advantages on narrow roads or places where fire trucks could not reach. It also could be used for drain waterlogging, drought resistance,irrigation,etc. It's an ideal equipment for watering, water supply and emergency disaster relief.
China emergency portable diesel fire fighting pump technical data:
Engine Model:Single,air-cooled,4-stroke,direct injection 190
Max theoretical power:13HP
Pump Body:Single stage
Fuel tank capacity:6.5L
Oil capacity:1.65L
Starting system:Recoil/electric start
Rated flow:600L/M
Rated pressure:0.45mpa
Max suction depth:7m
Priming type:Rotary vane vacuum pump
Priming time:�¡�?10s
Pump head:65m
Inlet:65mm
Outlet:65mm
Weight:75kg
Appearance dimension:660x520x560mm
The floating fire boat pump is composed of engine, floating seat and centrifugal water pump. It's a kind of multi-purpose pump, mainly designed for fire fighting, suitable for fire fighting in fire rescue departments, professional fire brigades, industrial and mining enterprises, counties,villiages, towns, etc. It's an ideal equipment for watering, water supply and emergency disaster relief.
Model : FTQ3.0/8
Engine type: Air-cooled,4-stroke,singe stage, gasoline
Engine model : Chinese brand engine LC170
Starting way: Recoil
Max flow:50T/H
Rated pressure : 0.3Mpa
Rated flow:8L/S
Pump head: 45m
Inlet : 65mm
Outlet :65mm
Weight :26KG
Appearance size : 650*550*450mm
Product introduction:
Products comply with GB6245-2006 "fire pump" standard, have been tested through the national fire equipment quality supervision and inspection center, the Ministry of public security fire product conformity assessment center
Product features:
There are a variety of optional structure
Technical parameters:
LiftAs the selected pump set
FlowAs the selected pump set
Field of application:
Fire protection system.
Product introduction:
Products comply with GB6245-2006 "fire pump" standard, have been tested through the national fire equipment quality supervision and inspection center, the Ministry of public security fire product conformity assessment center networkwww.cccf.com.cn
Product features:
There are a variety of optional structure
Technical parameters:
LiftAs the selected pump set
FlowAs the selected pump set
Field of application:
Fire protection system.
Introduction
1)have the standard of the national standard gb6245-98 "fire pump performance requirements and test methods" and the national fire protection association standard nfpa20 "centrifugal fire pump installation" and other standards.
2)the diesel engine fire pump is equipped with the characters of good and strong overload capacity, compact structure, easy to maintain and high degree of automation.
3)altitude = 1000m; ambient temperature: +5 °c ~ +40 °c; relative humidity: = 90%
Application
Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.
