Ferro Silico Manganese (FeSiMn) is a ferrous alloy that is produced by melting manganese ore and quartzite in the presence of coke in an arc furnace . Ferro Silico Manganese is an important deoxidizer, desulphurizer, and alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product . It is widely used in the steelmaking industry and has become the essential deoxidizing agent and additive in the steelmaking industry . The process of producing Ferro Silico Manganese is much more difficult than ferromanganese. The main reason is that a higher temperature is needed to reach the desired silicon level �¹. Slag generated in the production of high carbon ferromanganese is commonly used to produce FeSiMn . Ferro Silico Manganese is available in different types, and it can be used for various applications, such as cladding, decking, ceilings, walls, and saunas . In summary, Ferro Silico Manganese is a ferrous alloy that is produced by melting manganese ore and quartzite in the presence of coke in an arc furnace. It is widely used in the steelmaking industry as an important deoxidizer, desulphurizer, and alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product. It is available in different types and can be used for various applications, such as cladding, decking, ceilings, walls, and saunas.
We supply the Quality Ferro Alloys Like Silico Manganese HC Grade I II Mn 60% min 65% Min Si 14% Min 15% Min / 16% Min C 2.50% Max 2% Max S 0.03% Max 0.03% Max P 0.30% Max 0.30% Max Silicon Manganese Size : 10 - 60 mm Mn; 65 to 70% Si : 16 %c : 2 % P : 0.15 % S : 0.01 % High Carbon Silico Manganese - Standard Grades Mn : 60% Min. / 65% Min. / 70% Min. Si : 15% Min. / 16% Min. / 17% Min. C : 2 % Max. P : 0.30 % Max. S : 0.03 % Max. Size: 10 - 60 mm
We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
we can supply silico manganese lumps of grade 65/15 and 65/17 in 20ft containers from africa
Silico manganese slag ferro manganese hc (hc femn) ferro silico manganese (fesimn) silicon carbide silico manganese baghouse dust ferro silicon ferro silicon dross calsifer 50 and calsifer 75.Producer
Ferro Manganese
We are supplier and exporter of Manganese Oxide. Manganese Oxide Fertilizer Grade: Application: The product is generally used by the fertilizer industry. Fertilizer Grade: Appearance: Fine greenish-brown powder Total Manganese (Mn): 54% +/- 2% Manganese Oxide (MnO): 68% Iron as Fe: 12% max. Silica as SiO2: 12% max. Alumina as Al2O3: 5% max. Manganese Dioxide (MnO2): 2% max. Screen analysis 100 mesh (BSS): 95-100% Passing. Manganese oxide Mn :- 44 - 46 % Mno2 :- 06 % max. Sio2 10 % max. Fe203 :- 08 % max. 50 kgs. Hdpe begs.
Silicomanganese Slag Felman Production generates a residual commercial by-product, silicomanganese slag, through the production of Ferro Silicomanganese (FeSiMn). The slag is an inert solid green material consisting primarily of aluminum, manganese, magnesium, silicon, and calcium oxides. Production The slag is generated during the production of ferro silicomanganese using electric arc furnaces. The molten slag is casted, cooled by spraying it with cold water, and then crushed to the desired size. Potential Uses Potential uses of the commercial by-product include re-melt/reproduction, industrial fill, road base, textiles manufacturing, etc. Chemical Composition Below please find the available metals totals for the chemicals that were detected as components of the slag material. The material is considered non-hazardous as shown by Toxicity characteristic leaching procedure testing conducted on the material. A qualified and licensed environmental laboratory is currently conducting a general assay of the material to determine the % w/w of the different chemical components. TCLP Testing of Slag Chemical Slag Leachate RCRA Hazardous Waste Limits mg/L mg/L Arsenic ND 5.0 Barium 0.85 100.0 Cadmium 0.0011 1.0 Chromium 0.02 5.0 Lead ND 5.0 Mercury ND 0.2 Selenium ND 1.0 Silver ND 5.0 Slag Available Metals Totals Chemical mg/kg Aluminum 88,900 Barium 5,590 Calcium 151,000 Iron 7,230 Magnesium 28,400 Manganese 85,000 Potassium 12,200J Physical Aspects of the Material The material is a hard solid stone that has irregular fracturing similar to chert or glass. The material is primarily green, gray, and black in color and is odorless. The bulk density of the material is approximately 635 +/- 100 kg/m3. Material Size: Generally, one-to-four-inch stone, but can be crushed and sized to the clients desired specifications.
All Metal Connect (AMC), a U.S.A. based and operated company offers premium Ferro Silico Manganese products & exceptional service. Contact us for outstanding support and prompt responses. See the difference with AMC and request a quote today.
SiMn Specifications Mn 60% Min. Si 14% Min. C 2.5% Max. P 0.35% Max. S 0.04% Max. AND Mn 65% Min Si 15% Min. C 2% Max. P 0.30% Max. S 0.04% Max. Lump Size : (10 to 60) MM; 90% Min. 50 Kgs. / 1 Mt. Big Bags in Containers.
Manganese Ore 42%-44%, from Brazil, in bulk, video and pictures available, quantity 30.000 mt/month
Classification: MANGANESE Commodity: Manganesium 42% - Bulk Quality/Purity: 42% Price Conditions: FOB Price: Negotiable Origin: BRAZIL, Port of BARCARENA. Duration of Contract: Annual contract, renewable for the same term. Minimum amount: 30.000 MT x Month Total / Contract Quantity: Annual sales contract with initial delivery of 30,000 until reaching 50,000 Metric Tons per month. We have an important Mineral Reserve, we are able to meet the delivery and shipment goals that are scheduled. Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 10,000 mt for quality control Payment method: Direct bank transfer to the Seller's accounts of each load or Letter of Credit SBLC TM799 for the total annual amount of the contract + MT103 paid and discounted against a 100% approved SGS certificate, issued every 10,000 tons at the port of shipment. Delivery Documents: All product certificates, batch numbers, Fresh SGS, delivery schedule
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
type of package :in big-bag chemical composition Mn65%-70% Si 15%-17% C 1.6% P 0.035% S 0.02% Fraction 10-80 This product is in Georgia ,the place of boot is Port of poti ,we can sell every month 1000MT I
We can offer you Ferro-Silico-Manganese high Carbon as follows: Commodity : Ferro-Silico-Manganese Origin : Indian Min. order : 1.000 mt. Packing : Big Bag and container Payment : L/C, Indian port Specification : Mn : 60% MIN Si : 13-17% C : 2-2.5% P : 0.3% MAX S : 0.05% Price : USD 1.020/mt., FOB Mundra port India Specification : Mn : 70-80% C : 6-8% P : 0.4% Max S : 0.05% Max Si : 1.5% Max Price : USD 1.055/mt., FOB Mundra port India Best regards, B. Adily