Find Verified Expanded Metal Grating Suppliers, Manufacturers and Wholesalers

Anping tenglu metal wire mesh co.Ltd

Expanded metal grating

Expanded metal grating is made of steel plate which is slit and expanded in a cold-drawing operation. It is a heavy duty expanded metal, produced from carbon steel, aluminum, or stainless steel plate.

Expanded metal grating contains no joints or welds, each sheet is a single piece of sturdy steel. Each sheet is produced from low carbon steel plates up to 5/16" thick. The junctions of the strand and bond form a ridged surface for improved tractions. Grating is formed like a truss so that every inter-connecting strand acts as a structural member distributing the load stress in several directions across the supporting frame. The angular position of the strand and the bond makes the expanded metal grating stronger in deflection than steel plate material in original form. This product is available only in the regular or standard type and is not flattened.

Expanded meta l gratin g is de signed especially for use as a lightweight open steel flooring, is ideal for flooring, catwalks, platforms and stair treads, where principal use is for light storage and foot traffic. Its low cost and light weight, combined with high strength, make for a most economical construction. Expanded metal gratings are the ideal metal material for industrial walkways.
Typical applications include long length or catwalk grating - usually in 10 ft. Lengths by 2 or 3 ft. Widths. It is also ideal for flooring, platforms and stair treads, where principal use is for light storage and foot traffic.

Features : using expanded metal grating or expanded metal mesh is to ensure safety, strength and anti-skid surface of the most economical manner, especially on the runway, working platforms.

Expanded metal grating can be made from carbon steel, stainless steel or aluminum in styles from 1/4" to 1 1/2"

Expanded Metal Grating
Expanded Metal Grating is fabricated from low carbon steel plates and is ideal for use wherever a strong, durable, lightweight,non slip surface is needed platform flooring or stairs and walkways,etc.
When ordering Expanded Metal Grating, please state:
Reference number of mesh,Such as 3lb,4.27lb,
Raw material
Quantity of sheets required
Sheet size (LW dimension first â?? the diagrams below illustrate this point)
Any special finish required
Expanded Grating or Expanded Metal Catwalks is an economical solution for ramps, flooring, catwalks, platforms, walkways, treads or other types of lightweight structural applications.
Expanded Metal Grating has more advantages than steel grating bar,it is made of continuous piece of steel and has stronger yielding strength.
There is no welding through whole panel and the surface is naturally non slip for safety .
The various openings and hole pattern can provide wide range of load capacity to meet different request for your project.
Expanded Metal Grating is most econocial grating to assure strength,safety with a non-skid surface.
Expanded Metal Grating is easy for cutting into various sizes and can be installed quickly by welding or bolts.
Expanded Catwalk Grating is usually used for rugged industrial and commercial applications.
Catwalk Grating for Billboard
walkways gratings
Sidewalk
Louvers and security fencing
Ramps,Trailers for truck

Expanded Metal Walkway Grating&Floor&Ramps
Expanded Metal Wire Mesh
Rigidity Expanded Metal Mesh
Expanded metal grating products are used for a variety of uses such as walkways, catwalks, screens, fencing, window guards, open trash containers, vent covers and many more applications. Peterson Company carries expanded metal in a variety of materials such as aluminum expanded metal, stainless expanded metal, galvanized expanded metal, carbon steel expanded metal, copper expanded metal, brass expanded metal and titanium expanded metal. Product Details A strong and aesthetic solution for walkways and gantries. The Expanded Metal DONGJIEs heavy duty walkway range is an effective well established product, proven throughout industries where safety underfoot is critical. When lives can depend upon strength and grip, at heights and in hazardous conditions, the Expanded Metal Companys range can be relied upon to satisfy safety requirements. The Expanded Metal walkway range is excellent for slopes and heights due to its anti-slip properties. Mesh allows the free ow of water to give natural drainage. Snow,ice and mud break off underfoot to maintain secure footing. The solid appearance of the walkway range gives an excellent aesthetic appeal for design.
Features and Benefits
Quality Guaranteed ISO 9001: 2008
Environmental Mana gement
?�Technical support available
Wide choice of standard products
?�Available in Stainless Steel, Aluminium& Mild Steel
Economical solution for all types of walkway and gantry applications
Tested and measured load bearing capacities
New Gripwalk for extra anti slip protection
Supagrip gives _x001D_firm hold for both wheelchairs and footwear
Option to weld or clip the sheets in situ
Plasma cutting service for efficient and accurate shaping
Superb strength to weight ratio
Low maintenance
Material Specifications
You can choose from a wide range of standard items from gripwalk for extra anti-slip protection or walkway in a range of materials with measured load bearing capacities.
Products in the DONGJIEs range give a non-slip, economical solution for all types of walkways, stairtreads and gantries.
Aluminium Walkway
Ref No. LWD SWD Swdt Stk Kg/m� % Open Area Overall Thickness Standard Manufactured Size
2496 60.96 25.40 5.82 4.70 6.08 52 12.70 2440 x 1830
4895A 121.92 38.10 11.90 6.00 10.16 43 20.60
Mild Steel Walkway
Ref No. LWD SWD Swdt Stk Kg/m� % Open Area Overall Thickness Standard Manufactured Size
2496 60.96 25.40 6.10 4.5 17.29 51 12.70 2440 x 1220
4896 121.92 33.87 6.35 4.5 13.23 65 13.50
4897 121.92 33.87 7.90 4.5 16.45 58 15.10
4898 121.92 33.87 9.53 4.5 19.83 50 17.50
4899 121.92 33.85 9.53 6.00 24.98 50 19.80
4894 121.92 38.10 13.06 6.00 32.22 38 22.20
Material Illustrations---A

Metal Gratings

Available at all sizes

Metal Grate Walkway
Metal grate walkway is a type of flooring or platform made from metal grating. It is commonly used in industrial and commercial settings as a safe and durable surface for pedestrians to walk on. Grating walkways are often used in areas where there is a need for drainage or ventilation, or where the surface needs to be slip-resistant.

Metal grate walkways are made from metal grating, which is a type of open mesh flooring made from a series of parallel, spaced-apart metal bars that are attached to crossbars to form a grid-like structure. The bars are typically made from steel, aluminum, or stainless steel, and they can be coated with a variety of materials to improve their resistance to corrosion and wear. The spacing between the bars can vary, depending on the intended use and the required level of drainage or ventilation.

Grating walkways are typically used in outdoor or industrial settings, such as factories, warehouses, power plants, and oil and gas facilities. They are known for their strength, durability, and slip-resistant properties, and they are often used in areas where there is a risk of spills or other hazards. Grating walkways can be used on their own, or they can be combined with other types of flooring or paving materials to create more complex or customized surfaces.

Expanded Metal can serve as a kind of substitute for perforated metal materials and it find most uses as fences,windows decoration,ventilation devices,shelves,racks,cages and some decoration purposes.

Standard expanded metal provides a high strength to weight ratio,and is often used to protect machines or people,by stopping a specific size material from entering as a specific area.All Metals such as Stainless Steel Alloys,Aluminum,Titanium,Steel,Cooper,can all be expanded into rhombic opending for various uses including enclosures,support,protection,decoration or filtration.

fdasf

Specification of expanded metal sheet

Item

Strand

Design sizes

Opening sizes

Open area

(%)

Thickness

(Inch)

Width

(Inch)

LWD

(Inch)

SWD

(Inch)

LWO

(Inch)

SWO

(Inch)

01

0.134

0.150

2.00

0.923

1.562

0.675

67

02

0.092

0.144

2.00

0.923

1.625

0.718

69

03

0.090

0.096

2.00

0.923

1.688

0.76

79

04

0.060

0.101

2.00

0.923

1.75

0.783

78

05

0.090

0.096

1.20

0.500

0.938

0.337

62

06

0.060

0.087

1.20

0.500

0.938

0.372

65

07

0.048

0.088

1.20

0.500

0.938

0.382

65

08

0.036

0.072

1.00

0.500

0.718

0.407

71

09

0.048

0.072

1.00

0.250

0.718

0.146

42

10

0.036

0.072

1.00

0.250

0.718

0.157

42

Half Moon Grate

Product Material Specification Military Specification
Light Duty Welded, Light Duty Press-Locked, Light Duty Swaged --ASTM A-569 (1/8, 3/16, 1/4) --ASTM A-36 (1/4) by inquiry MIL-G-18014 (Ships)
Heavy Duty Welded Steel --ASTM A-36 (1/4, 5/16, 3/8,1/2) --Other (by inquiry)

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.

Please feel free to contact us for further details.

Size 300x600 mm
Material CI
Shape Rectangular
Brand Prit
Surface Treatment Color Coated

All types and sizes of expanded metal mesh are available.

Pularin:
Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball.
Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting.
where?
1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University.

Cost:
150 times costlier than gold.
10 grams pularin $23000 to $45000
also info given by Bucky-USA website.

Special uses if this becomes common:
1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc.
2)Bullet proof ackets
3)curing cancer etc.

Marine gratings and marine grilles fully comply with CBT608 and CBT615.

Steel and stainless steel gratings are produced mainly by welding. First, we will punch or slot the flat steel, then place the crossbar into the hole for spot welding. Each contact point of the cross bar and the flat steel is properly welded. The crossbar can also be welded by spot welding. welding staff have the top grade industry profession certification

The base of the grilles or gratings could be material of steel ASTM A36, stainless steel 1cr18ni9ti, FRP,polyester and etc.

Our new product molded polyester grating is using glass fiber as the reinforcing material, using the unsaturated polyester resin as substrate and then specially processed and compounded to be strong and anti-slip.

Our grilles could be used as bilge suction grilles for shipbuildiing, deck walkway gratings, Marine submarine door grilles and etc.

PI20·series incremental circular grating
High precision non-contact grating


Primary advantages

- P120 series gratings are integrated stainless steel circular gratings, with 20m incremental grating lines engraved on the cylindrical surface, and optical reference marks, available in a variety of sizes.
- The non-contact form eliminates backlash, torsional errors (twist), and other mechanical hysteresis errors inherent in traditional enclosed encoders.
- The rings are mounted with excellent accuracy and have a tapered mounting system that reduces the need for highly toleranced machined parts and eliminates eccentricity.
- Compatible with RX2 readhead

Wedge wire mesh
Wedge wire mesh is also known as V wire mesh.It is formed by stainless steel wire pressure welding.It has good screening ability,good corrosion resistance.And rugged durability.
Material:304/316/201/205/904L/galvanized metal
Wire shape: V wire/ Round wire /Square wire
Backflushing performance: It has Convenient flushing,convenient flushing.

We are supplier of Gratings, which is used for platform, steps, landing in structure.

Cast Iron Grate
Length and Breadth 300-1200mm
Thickness 12mm - 50mm
Shape: Round, Square, Rectangle