Ethyl Caproate(CAS:123-66-0)
1 117-81-7 Bis(2-ethylhexyl) phthalate 2 117-84-0 Di-n-octyl phthalate 3 85-69-8 Butyl 2-ethylhylhexyl phthalate 4 84-61-7 Dicyclohexyl phthalate 5 84-74-2 Dibutyl phthalate 6 84-69-5 Diisobutyl phthalate 7 131-11-3 Dimethyl phthalate 8 84-66-2 Diethyl phthalate 9 20548-62-3 Bis(7-methyloctyl) phthalate 10 68515-49-1 Diisodecyl phthalate 11 84-75-3 Di-n-hexyl phthalate 12 6422-86-2 Dioctyl terephthalate 13 137-89-3 Bis(2-ethylhexyl) isophthalate 14 123-79-5 Dioctyl adipate 15 122-62-3 Bis(2-ethylhexyl)sebacate 16 109-43-3 Bis(n-butyl)sebacate 17 512-56-1 Ttrimethyl phosphate 18 126-73-8 Tributyl phosphate 19 8013-07-8 Epoxidized soya bean oil 20 77-93-0 Triethyl citrate
1 141-78-6 Ethyl acetate 2 79-20-9 Methyl Acetate 3 123-86-4 Butyl acetate 4 108-32-7 Propylene carbonate 5 75-12-7 Formamide 6 127-19-5 N,N-dimethylacetamide 7 872-50-4 N-methylpyrrolidin-2-one 8 26171-83-5 1,2-butanediol 9 504-63-2 1,3-Propanediol 10 26761-45-5 2,3-Epoxypropyl neodecanoate 11 57-55-6 Propylene Glycol 12 108-94-1 Cyclohexanone 13 95-47-6 o-xylene 14 2238-07-5 Diglycidyl ether 15 122-60-1 Phenyl glycidyl ether 16 34590-94-8 Dipropylene glycol monomethyl ether 17 110-54-3 Hexane 18 109-99-9 Tetrahydrofuran 19 75-09-2 Dichloromethane 20 110-82-7 Cyclohexane
1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane
S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
Product Name:Aluminium sulphate Molecular Formula:AL2(SO4)3 Hs Code: 2833220000 CAS Code:10043-01-3 Standard:HG2225-2010 Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter. Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive. Specifications Item Name Standard AL2O3 15.6% 16.5% 17% Fe2O3 ¤0.5 % 0.005 % 0.004% PH value .0 3.0 3.0 Water insoluble matter 0.2% 0.04% 0.03% Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder
Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12
Ethyl Maltol, E637 CAS No.4940-11-8, is a common flavor manufactured through chemical synthesis from Maltol, available as White crystalline powder. Ethyl Maltol appears as a white crystalline powder. It is a flavoring agent with a slight sweet taste, and is commonly used to prolong the shelf life of food products. It increases flavor and sweetness in items such as in ice cream, jelly, ketchup, chocolate, candies, desserts, beverages, essences, wines, tobacco products, and other consumables. As an experienced Ethyl Maltol manufacturer and supplier, we has been supplying and exporting Ethyl Maltol for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Maltol Specification ITEM STANDARD Appearance White crystal Solubility in ethanol colourless and clear Purity 99.2 % Melting point 89-93 Moisture 0.5 % Residue on ignition % 0.2 % Heavy metals (as Pb) 10 PPM Arsenic 1 PPM Fe 1 PPM
Categories Aromas Qty in 20' FCL 14400kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 8006-90-4 HS Code 290611 Specification FCC/USP Ethyl Acetate, E1504, CAS No.141-78-6, with chemical formula C4H8O2. manufacturing process through ethanol and acetic acid, safe food additives, used as aromas & perfumes. Function: Ethyl acetate is the ester of ethanol and acetic acid, it is manufactured on a large scale for use as a solvent. This colorless liquid has a characteristic sweet smell (similar to pear drops) and is used as a solvent in oil-based lacquers and enamels, in inks and adhesives and as a process solvent. As an experienced Ethyl Acetate manufacturer and supplier, we has been supplying and exporting Ethyl Acetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Acetate Food grade Specification ITEM STANDARD Appearance Colourless transparent liquid Assay (%) 99.5 Loss on drying (%) 0.1 Acidity (as Acetic, %) 0.004 Density (g/cm3) 0.897 0.902 Evaporation Residue (%) 0.001 Color (Apha) 10 Distillation range () 76.0 79.0 Ethanol (%) 0.04 Arsenic 3 mg/ kg Lead 2 mg/ kg Mercury 1 mg/ kg Heavy Metals (as Pb) 10 mg/ kg
Ethyl Vanillin, CAS No.121-32-4, Chemical Formula C9H10O3, manufacturing process from chemical synthesis. Ethyl Vanillin is one of the important edible food flavors and fragrances and the raw material in food additive industry. It has full-bodied and lasting fragrance of Vanilla Beans and is 3-4 times as fragrant as Vanillin. Ethyl Vanillin is used in food, sweets, chocolate, candy, ice cream, drinks and cosmetics as fragrance fixative and additive. As an experienced Ethyl Vanillin manufacturer and supplier, we has been supplying and exporting Ethyl Vanillin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Vanillin food grade Specification ITEM STANDARD Appearance Fine white to slightly yellow crystal Odor Characteristic of vanilla, stronger than vanilla Solubility (25 ) 1 gram completely dissolves in 2ml 95% ethanol, and make clear solution Purity (HPLC) 99% Loss on Drying 0.5% Melting Point () 76.0- 78.0 Arsenic (As) 3 mg/kg Mercury (Hg) 1 mg/kg Total Heavy Metals (as Pb) 10 mg/kg Residue of Ignition 0.05%
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Product Description Categories Sweeteners Qty in 20 FCL 9000kg, 11250kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E951 CAS No. 22839-47-0 HS Code 292429 Specification FCC/USP Aspartame is an artificial sweetener, like Acesulfame Potassium, Sucralose, Sodium Saccharin, Sodium Cyclamate and Neotame. It is widely in daily food products to replace sugar. There are too many types of Aspartame in the market, generally are powder 100mesh, Granular 20-60mesh, Fine Granular 60-100mesh, HDP 100-200mesh and Super Fine Powder 300mesh. Weâ??re China Aspartame supplier not only sell Aspartame but also provide manufacturers analysis, market price trends, free samples and also other food additives for mix combined. Aspartame Powder 100mesh Specification Test Item Specification Appearance White Powder Odor/Taste Conforms to Quality Standards Identification Meets Requirements Assay (on dry basis) 98.0% to 102% Loss on Drying 4.5% Residue on Ignition / Sulphated Ash < 0.2% Optical (Specific) Rotation +14.5 and +16.5 Conductivity 30 Scm-1 Transmittance 95% Extraneous Matter Free from material foreign to product pH (0.8% Solution) 4.5 ~6.0 Heavy Metal (as Pb) 10 ppm Lead < 1 ppm Arsenic < 3 ppm Residual Solvents Meets Requirements 5-benzyl-3,6-dioxo-2 Piperazineacetic Acid (DKP) 1.5% Other Related Substances 2.0% USP/NF; 1.5% EP L-phenylalanine 0.5% Solubility Completely Dissolves Particle Size NMT 5% on 100 mesh Bulk Density 0.3 +/- 0.1 g/mL Total Aerobic Plate Count 250 CFU/g Yeast and Mold Count 100 CFU/g Coliforms 3.0 MPN/g Escherichia Coli Negative/g Salmonella Negative/25g
Calcium Caseinate, CAS no.9005-43-0, is a protein produced from casein in skim and sometimes 1% milk, and functions as a calcium and protein supplement. Calcium Caseinate supplies the necessary amino acids for human bodies and reinforces the absorption of calcium inside human bodies. It uses as thickening, emulsification and formability properties, and used in nutrition beverages, cheese, bread and baked goods. It is a protein that can also be used as dietary supplement for bodybuilders and other athletes. As an experienced Calcium Caseinate manufacturer and supplier, we has been supplying and exporting Calcium Caseinate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Calcium Caseinate Specification APPEARANCE CREAM WHITE POWDER PROTEIN (DRY BASIS) 90.00% MOISTURE 5.5% PH 6.3- 7.0 ASH 6.00% FAT 1.5% TOTAL PLATE COUNT 20000G Calcium 1.00 PATHOGENIC BACTERIA NEGATIVE YEAST/MOULD 50/G MAX
Vital Wheat Gluten, CAS no.8002-80-0, food protein, extracted from wheat flour, available as Pale yellow powder. Non-GMO Vital Wheat Gluten is a meat-like, vegetarian food product, used as a meat substitute in many cultures.Vital Wheat Gluten often used to imitate the flavor and texture of duck, poultry, pork, beef, and seafood. It is a natural vegetable protein with a 75% crude protein content procured from wheat, which has had its starch removed. As an experienced Vital Wheat Gluten manufacturer and supplier, we has been supplying and exporting Vital Wheat Gluten for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Vital Wheat Gluten Specification ITEM STANDARD PROTEIN (N5.7 ON DRY BASIS) 75%MIN MOISTURE 9%MAX ASH 1%MAX GRANULATE SIZE (% 198MICRON) 95%MIN WATER ABSORPTION (ON DRY BASIS) 150%MIN
Cocoa Powder CAS No.83-67-0, is a powder of cocoa beans manufactured through fermentation, available as Fine, free flowing brown powder used as food supplements to improve flavoring. Cocoa powder is also available in Alkalized form as Alkalized Cocoa powder. As an experienced Cocoa Powder manufacturer and supplier, we has been supplying and exporting Cocoa Powder for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Cocoa Powder Specification Natural Cocoa Powder 10%-12% ITEM STANDARD Appearance Fine, free flowing brown powder Colour of powder Brown to dark brown Flavour Characteristic cocoa flavour Fat content (%) 10 12 Moisture (%) 5 Ash (%) 8 Fineness through 200 mesh (%) > 99 pH 5.2 5.8 Total plate count (cfu/g) 5000 Mould count (cfu/g) 100 Yeast count (cfu/g) 50 Coliforms Not detected Shigella Not detected Pathogenic bacteria Not detected
Isolated Soy Protein, CAS no.9010-10-0, is manufactured from high quality Non-GMO soybean, available as yellow or milk white powder. It has excellent dispersibility, a high viscosity. Isolated Soy Protein is used in high protein beverages, infant formulas, cereals, nutritional bars, meat products, low-temperature barbeque products, reformed cheese, sausages, fish food, and frozen food. As an experienced Isolated Soy Protein manufacturer and supplier, we has been supplying and exporting Isolated Soy Protein for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Isolated Soy Protein Specification SOY PROTEIN ISOALTE (Emulsion Type) is our new special designed soy protein isolate with higher viscosity and stronger emulsification, it can help meat processors to achieve higher emulsification requested and higher water binding to reduce the cooking loss and prevent fat loss and improve the structure of final products in a cost effective way. Physical Characteristics Protein(in dry basis N 6.25 mfb) 90% min Moisture 7% max Ash 6% max Crude fiber 0.5% max Fat 0.5%max PH 7.3 ± 0.5 Colour light Flavour neutral Typical Bacteriological Analysis Standard plate count 20,000/g max Coliforms 100/g max E Coli (in 0.1g) negative Yeast and mould 100/g max Salmonella (in 25g) negative Particle Distribution (Typical Analysis)99% through 100# U.S. standard screenHeavy Metal Analysis lead 1.0 mg/kg max Arsenic 0.5 mg/kg max Packing: 20kg net weight, paper/plastic bag poly-lined.Storage: below 75â?? and 60% relative humidity promotes longer shelf life.Certificate: BRC, HACCP, ISO9000, ISO22000, IP, Kosher & Halal certificatedShelf life: one year.
