Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Central Asia, Midde East
KAZAKHSTAN DIESEL GAS D2 OIL GOST 305-82 Quantity: 50,000-500,000 Metric Tons CIF Price: Gross $420USD per Metric Ton / Net $410USD per Metric Ton. FOB Price: Gross $410USD per Metric Ton / Net $405USD per Metric Ton COMMISSION: $5 SELLER SIDE / $5 BUYER SIDE TERMS & OPERATIONAL PROCEDURE: C.I.F 1. Buyer issues ICPO must be with buyer company letterhead and buyer banking information. 2. Seller issues Draft Contract (open for any amendments) to Buyer. Buyer signs, seals and returns the Draft Contract to Seller for final endorsement with letter of acceptance. Seller gives Partial proof of products. (A) Certificate of Origin (B) Product quality passport (Analysis test Report) By KAZAKHSTAN standard gost R (C) Commercial Invoice (D) Statement of availability of product 3. Within 7 banking days, Buyers bank sends Transferable SBLC, DLC, BG via MT760/MT700 Letter Credit according to sellers fiduciary bank verbiage to seller nominated fiduciary offshore bank account for first month shipment, should buyer fail to issue payment instrument within 7 banking days, buyer will make cash deposit of $ 400,000 by TT wire transfer for security guarantee to enable seller charter vessel and commence shipment, and this payment will be deducted from the total cost of product after inspection at discharge port, Sellers Bank issues Full POP Documents to the Buyers Bank alongside with the 2% Performance Bond (PB) a) Copy of license to export, issued by the department of the Ministry of Energy, KAZAKHSTAN Federation. b) Copy of Approval to Export, issued by the Ministry of Justice, KAZAKHSTAN Federation. c) Copy of statement of availability of the product. d) Copy of the refinery commitment to produce the product. e) Copy of Transnet contract to transport the product to the loading port. f) Copy of the port storage agreement. g) Copy of the charter party agreement to transport the product to discharge port h) Copy of Vessel Questionnaire 88. i) Copy of Bill of Lading. j) SGS Report at loading port. k) Dip test Authorization (DTA) & ATB l) NOR /ETA m) Certificate of Ownership Transfer n) Allocation Transaction Passport Code Certificate (ATPCC) by Ministry of Energy Shipment commences as per signed contract delivery schedule and the shipment should arrive at Buyers discharge port within 5- 25 days. The SGS inspection will be borne by the Seller at the loading seaport and Buyer at the unloading seaport. 4. Buyer releases payment to Seller by TT/MT103 upon receipt of the shipping documents and confirmation of the Q & Q by SGS/CIQ at destination port. 5. Seller pays commission within 48 hours by swift MT103 to all intermediaries as signed NCNDA/IMPFA.
The minimum order quantity is 10.000 Metric Tons (MT) per month, we accept FOB or CIF shipping terms according to your requirement. We have an excellent commercial relationship with the refinery in charge of supplying the products, this allows commercial dialogues to be more direct with them and facilitates negotiations. Interested in receiving more specific information such as prices, technical sheets and more about the D2, leave a message with your requirements or send your contact information to start a business dialogue.
- Quantity: 100,000 - 500,000MT per month
Diesel Gas Oil D2
D2 Diesel Gas Oil is offered by our ends sellers considering needs of diverse industrial sectors. We provide D2 Diesel Gas Oil in different grades. Our D2 Diesel Gas Oil is mainly used to run several industrials as well as commercial automobiles. We take up bulk orders of D2 Diesel Gas Oil and deliver it timely. Our D2 Diesel Gas Oil is available at competitive rates. Minimum ordered quantity of our D2 Diesel Gas Oil should be 50.000MT Grade Available : D2 DIESEL GAS OIL L-0.2-62 GOST 305-82 OFFICIAL GUARANTEED SPECIFICATION FOR RUSSIAN ORIGIN GAS OIL 0,2/62 GOST 305 82 RUSSIAN GAS OIL D2 GOST 305 Â82 COMPONENT INIT MIN MAX Density@ 20 deg C Kg / m3 0.870 Colour 1.0 2.0 Flash point, PMCC Deg C (C) 57 66 Kinematic viscosity @20 deg C C ST 3.0 6.0 Pour point Deg C (C) (*) 10.0 Cloud point Deg C (C) (*) 5.0 Mercaptan Sulphur 0.01 Acidity, mg / 1000 cm3 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.01 0.02 Copper corrosion 3hrs@50 deg C (Typical) 1 A CCR on 10% Residues %wt 0.20 Cetane Index 45 Distillation range: - 50% Recovered Volume deg C (C) 280 - Â90% Recovered Volume deg C (C) 350 - Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 The product is guaranteed by Seller not to contain bacteria and other living organism contamination above normal level (1000 CFU/l).
Diesel Gas D2 OIL GOST 305-82 Requirement from Buyer 1. PRODUCT: 2. QUANTITY: 3. DESTINATION: 4. TERM CONTRACT Only ): 5. PAYMENT TERM: 6. TARGET PRICE: 7.Letter of Intent (LOI)
Diesel Gas D2 Oil Gost 305-82 Minimum Quantity: 5000 Metric Tons per Month Maximum Quantity: 50,000 Metric Tons per Month CIF Price: Gross USD $400.00MT NET / USD $390.00MT on CIF FOB Price: Gross USD $390.00MT NET / USD $380.00MT on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Diesel Gas Oil D2 or S500 GOST
DIESEL-GAS OIL L0.2-62 GOST 305-82 (Diesel D2) Origin Russian Quantity: Quantity MINIMUM 50,000MT MAXIMUM 900,000MT x 12 months Loading Port: Vladivostok Delivery: CIF/FOB (AWSP) CIF Price: Gross 300.00 / Net $290.00 USD per Metric Ton, FOB Price: USD Gross $270/260 Net per Metric Ton, Commission: USD 5.00 seller side, USD 5.00 Buyer side Per Metric Ton
DIESEL-GAS OIL L0.2-62 GOST 305-82 (Diesel D2) Origin Russian Quantity MINIMUM 50,000 MT MAXIMUM 500,000 MT x 12 months C.I.F Price: Gross $210 USD / Net $200 USD per MT C.I.F ASWP F.O.B Price: Gross $170 USD / Net $160 USD per MT F.O.B Rotterdam Commission: Seller Side $5.00 USD , Buyer Side $5.00 USD per MT C.I.F ASWP Commission: Seller Side $5.00 USD , Buyer Side $5.00 USD per MT F.O.B Rotterdam
Origin: Kazakhstan, Georgia, Malaysia Incoterms: CIF/FOB Loading Port: Rotterdam and Houston etc Payment Terms: MT103 TTWIRE Performance Bond: 2% PB Contract Term: SPOT 6-12 Month Minimum (With Rolls and Extension Inspection: SGS CIQ or Similar Diesel Gas D2 Oil Minimum Quantity: 50,000 MT per month CIF Price: Gross USD $625.00 MT / Net USD $615.00 MT FOB Price: Gross USD $435.00 MT / Net USD $425.00 MT TRANSACTION WORKING PROCEDURE FOB Rotterdam/Houston 1. Buyer sends Company Profile along with ICPO, Tank Storage Agreement (TSA) and data page of buyers passport 2. Seller Issues commercial invoice (CI), Buer signs and returns commercial invoice back to seller. 3. Seller verify buyer TSA by Letter and Seller issues the following POP documents to buyer: a)Statement of Product Availability b)Commitment Letter of Supply c)Unconditional Dip Test Authorization (UDTA) d)Authorization to Sell and Collect (ATSC) e)Authorization to verify the product in Seller''s tank (ATV) f) Fresh SGS not older than 72 hours 4. NCNDA/IMFPA will be signed among all parties involved. 5. Buyer options conduct DIP TEST on the product and make the payment for the total value of product injected into the tanks through the means of mT103-TT 6. Seller pays commission to all intermediaries involved in the transaction and subsequently monthly shipment continues as per terms and conditions of the commercial invoices and extension of transaction by issuing 12 months contract to buyer for proceeding. STAND TRANSACTION CIF PROCEDURES 1. Seller confirms ICPO + passport of buyer and issues FCO for signing 2. Seller issues contract for amendment and countersigning as per mutual agreement. 3. Seller legalizes and register contract at seller expense and send to buyer as final approved, registered and legalized contract 4. Seller sends to buyer via e-mail, the following POP documents in buyer''s name for verification of the allocation: A. Statement of product availability B. Refinery commentment to supply C. Company profile D. MSDS E. Company license to export 5. Buyer and Seller sign the CPA with the secured shipping company for documentation along with the NCNDA and IMFPA for commission construction
Diesel GASOIL D2 Origin: QATAR QUALITY: Established by the International Standards (SGS). Specification: Standard Form of Packing : As Per Buyers Request Minimum Order Quantity: 10.000 Metric Tonnes Production Capacity: 500.000 Metric Tonnes Per Month. Shipping Terms FOB or CIF ASWP PORT : RAS LAFFAN/HAMAD/ROTTERDAM/ FOB PRICE: USD: $ Inspection: SGS or Equivalent CiF PRICE USD: $ 850 Metric Tons COMMISSION CHARGED SHIPMENT TIME within 20 days from LC DATE and DELIVERY within 35 to 45 days from the date of bill of ladings depending on chosen port. NO, TTM/FTF Diesel GASOIL D2 Gost 305-82 D2 Gost 305-82 D2 is an abbreviation for Gas oil. It is the second distillate from the processing of crude oil. It can be used without reformers and additives. D2 has helped in a major reduction of wasted energy, pollution and waste. It can be used without reformers and additives. Diesel Gasoil (D2) is any liquid fuel used in diesel engines, whose fuel ignition takes place without any spark, as a result of compression of the inlet air mixture and then injection of fuel. Gasoil (also known as fuel oil, heavy oil, marine fuel, bunker, or furnace oil) is a fraction obtained from the distillation of petroleum (crude oil). It includes distillates (the lighter fractions) and residues (the heavier fractions). The 305â??82 version of D2 has lower sulphur content. The GOST 305â??82 variant of Gas oil and D2 meets the ISO industry standards with a suplhur content of 0.2% maximum. This low sulphur content refers to Ultra Low Sulphur Fuel. D2 Oil GOST 305â??82 also creates less pollution. Since 2006, nearly all of the petroleumâ??based diesel fuels available in North America and Europe have been of a ULSD type.
DIESEL GAS D2 OIL ORIGIN: KAZAKHSTAN LIFTABLE QUANTITY: 50,000MT MONTHLY: 200,000MT PRICE FOB: US $480 GROSS, US $470 NET PER MT COMMISSION: US $10 PRICE CIF: US $530 GROSS, US $520 NET MT COMMISSION: US $10 SHARING: $5 ON THE SELLER SIDE AND US $5 ON THE BUYER SIDE
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude, and can be used without reformers and additives. So, the first engines used D2 as fuel before petrol cars as we know them today was invented This chemical compound holds the highest amount of energy components and lubricant properties in one mixture and offers the best fuel performance available on the market today. Most scientists agree that grade2 diesel fuel will protect injection pumps, seals, and other important engine parts. D2 is the current standard for all automotive diesel fuel sold in the Union member states and other countries