Find Verified Detectable Duct Hunter Rod Cable Suppliers, Manufacturers and Wholesalers

Product Description :
HDPE cable duct used for underground fibre cable installation

Price of product ( USD price or FOB price) :
0.65 USD per Mtr of FOB Prices

HSN Code ;
3916

Minimum Order Size and Packgaing details :
10000 Mtr packing 100pcs/Box

Mine detection cable is mainly used in various oil and gas Wells with Oil well wax removal, viscosity reduction and coagulation reduction, coring and well logging, perforation etc., can also be used in ocean research and river, harbor, water conservancy hydrological measurement, as well as coal field geological prospecting, geothermal well logging, etc.,The detection cable is connected with the sensor and the signal terminal, which has a strong anti-interference signal transmission function.

Material - Aluminium
Width -400mm
Country of Origin - Made in India
Length -3 Meter
Finishing -Hot Dip Galvanized
Feature - Corrosion Resistant

cable duct and underground cable protection range of products are independently certified to British and European Standards and are used extensively for LV, MV & HV substation, highways, housing developments, commercial, retail and industrial infrastructure applications including a full range of cable protection duct for medium/high voltage cables operating at 11kV/33kV and 66kV/132kV.

Cables should be installed into ducts that are sized suitable to accommodate the cable diameters and before a cable is installed all cable duct should be checked and cleared of obstructions.

1. Premium quality Powder coated, pre-galvanized or hot dip galvanized steel or Aluminum.
2. Excellent finish.
3. Width 50mm to 1200mm, height 25mm to 100mm
4. Ladder type, perforated or covered duct options.
5. Stainless steel nuts & bolts.
6. Available with accessories like bends, Tees, Reducers, Supports etc.
7. Made in India.

Cable duct pipe confirming to is 16205 sizes available from 40mm to 120mm

This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation.

The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.

The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members.

Features & Application

òExcellent optical, mechanical & environmental performance
òHigh strength-to-weight ratio
òCSM dielectric type û Fiber Reinforced Plastic
òDry block construction
òHigh tensile strength
òHigh crush strength
òCorrosion resistance
òKINK resistance
òVery light weight
òVery flexible & small bending radius
òLong haul / backbone application
òJunction communication systems
òAll dielectric applications
òCATV applications.

Construction Parameters

Fiber Count 02 û 144 Fibers
Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Second (Outer) Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.

Introduce

TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location of the TRACEABLE DUCT RODDER .
We can generate the TRACEABLE DUCT RODDER has two kinds, one is to be able to carry the monitoring function, one kind is the individual tracking function. The difference between the two is that with a probe into the function of a video wire inside, and a power cable, you can head the head to install the head, in order to view the situation in the pipeline. A bare copper wire can be used to locate and track the position of the TRACEABLE DUCT RODDER in a single probe function.

The traceable duct rodders are available in 8mm-16mm diameter. Detectable duct rods are used to find, follow and accuratelymap the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod.
The traceable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads canmake a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter's lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides themost effectivemethod of signal transmission.

Copper cathode is the primary raw material input for the production of copper rod for the wire and cable industry. Brat supplies cathodes that are produced with ISA Technology and comply with the cathode standards LME Grade A and Copper Cathodes Grade 1 (ASTM B115).

Copper Wire Rods are high-purity copper semi-finished products primarily used as raw material for manufacturing electrical wires, cables, conductors, and various copper-based components. Produced through controlled casting and rolling processes, they offer excellent electrical conductivity, thermal conductivity, ductility, and consistent mechanical properties. Copper wire rods are commonly supplied in continuous coils and can be further processed through wire drawing, stranding, and insulation operations. Electrolytic Tough Pitch (ETP) copper grades such as C11000 are widely used for electrical applications. Their consistent quality, excellent workability, and high conductivity make copper wire rods suitable for power transmission, electrical equipment, telecommunications, automotive wiring, and industrial cable production.

Key Specifications
Product Type: Copper Wire Rods
Material: Refined Copper
Common Grade: C11000 / ETP Copper
Copper Purity: Typically 99.90%+ Cu
Typical Diameter: 8 mm, with other sizes available
Form: Continuous coil
Surface: Smooth and clean
Electrical Conductivity: High
Manufacturing Process: Continuous casting and rolling
Customization: Available according to buyer requirements

Copper Wire & Rods High-Conductivity Copper for Electrical & Industrial Use

Our copper wire and rods are premium-quality copper products manufactured from high-purity copper, typically meeting industry standards for electrical conductivity and mechanical performance. Designed for a wide range of applications, they offer excellent conductivity, flexibility, and durability.

Copper rods are commonly used as the base material for drawing wires and cables, while copper wires are used directly in electrical systems, power transmission, and industrial applications. These products are essential in construction, electronics, telecommunications, and manufacturing industries.

Key Features:

High-purity copper with excellent electrical conductivity
Available as copper rods (for wire drawing) and finished wires
Smooth surface finish with consistent diameter and quality
Excellent ductility, flexibility, and corrosion resistance
Suitable for electrical wiring, cables, and industrial applications
Widely used in power transmission, electronics, and construction
Manufactured to international standards (ASTM, IEC, etc.)
Available in various diameters, lengths, and coil forms
Supplied in coils, spools, or straight lengths depending on specification
Ideal for both industrial processing and direct application

Copper Rods are high-quality metal products manufactured from refined copper for electrical, industrial, and manufacturing applications. Known for their excellent electrical conductivity, thermal conductivity, corrosion resistance, and mechanical strength, copper rods are widely used in the production of electrical wires, cables, busbars, transformers, and other copper components. They are available in different diameters, grades, and surface finishes to meet specific industrial requirements. Copper rods can be supplied in straight lengths or coils, depending on the application. Their reliable performance and excellent workability make them a preferred raw material for electrical manufacturers, construction companies, and metal processing industries.

Key Specifications
Product Type: Copper Rods
Material: Refined Copper
Copper Purity: 99.90% - 99.99%, depending on grade
Common Grade: C11000 / Electrolytic Tough Pitch Copper
Diameter: Available in various sizes
Form: Straight lengths or coils
Surface: Smooth and clean
Electrical Conductivity: High
Customization: Diameter, length, and packaging options available

Premium-quality copper cathode manufactured to international standards with a minimum copper purity of 99.99%. Produced using advanced electrolytic refining technology for superior conductivity, corrosion resistance, and consistent quality. Suitable for wire rods, electrical cables, transformers, electronics, construction, automotive, and industrial manufacturing applications. Available in export-grade packaging with bulk shipment capability and flexible delivery terms.

BRIMSON Instrumentation cables ensure smooth Communication of low-level signals from electronic transmitters to the control room. These cables effectively cut down any distortion or cross talk. Thesuperior Aluminium Mylar industries like Petrochemivals, Steel, Aviation, fire Alarm Systems, Refineries, Pharmaceuticals, Thermal Power Projects, chemical Plants, Transmission systems, Computer Controlle Electrical & electronic Equipments etc.

Signal cables are imperative when you want to keep the signal to noice ratio and the capacitance to the minium in persence of stay magnetic fields. They are used in sensitive areas where accurate data inputs are necessary viz. electronic industries and Nuclear Power Plants.


RTD (Remote Temperature Detection) cables carry temperature readings from remote or inaccessible areas to the contol room.

The growing sophiticated of the electronic idustry continues to create a need for specially designed cables for use with computer-controlled electrical and electronic equipment. To satisfy requirement for impedance matching, lower bit error rates, lower crosstalk, longer transmission distances and high signal purity, we are manufacturing an expanding spectrum of instrumentation, daa and control cables in full purity, we are manufacturing an expanding spectrum of instrumentation, data and controlcables in full range of sizes, insulatings of different types, shields types for special installations. We can also armour these cables for mechanical protection.

Premium Grade Copper Cathode Sheets (Electrolytic 99.99% Purity)

We supply Premium Grade Copper Cathode Sheets (Electrolytic 99.99% Purity), manufactured and tested to meet international quality standards such as ASTM B115. Our copper cathodes are widely used in the electrical, electronics, and metallurgical industries due to their exceptional conductivity, corrosion resistance, and malleability.

Each cathode is produced through advanced electro-refining processes, ensuring uniform thickness, smooth surfaces, and the absence of radioactive or hazardous contaminants. Ideal for wire and cable production, transformer manufacturing, copper rod extrusion, and other industrial applications.

Origin: Zambia
Transit Route: Zambia to Dar es salaam Port
Destination Port: Upon Client Request

Copper Cathode is a high-purity form of copper metal, typically containing 99.99% copper (Cu), produced through electrolytic refining or electrowinning processes. It is cast into flat plates and serves as the primary raw material for manufacturing copper rods, wires, cables, tubes, and other industrial products. Due to its excellent electrical conductivity, corrosion resistance, and ductility, copper cathode is widely used in the electrical, electronics, construction, automotive, and renewable energy industries. It is the internationally traded benchmark product for refined copper.

Copper cathodes are high-purity copper metal sheets produced through an electrolytic refining process. They are widely used as a primary raw material in electrical, construction, and industrial manufacturing sectors.

Copper cathodes are flat rectangular sheets of refined copper (usually 99.99% purity) obtained after the electro-refining process of copper ore.

They are the starting point for producing:

Copper rods
Copper wires & cables
Copper tubes & pipes
Electrical components

Industrial versatility

Used in:

Electrical wiring
Power generation systems
Electronics manufacturing
Construction materials

Copper Cathodes High-Purity Copper for Industrial Manufacturing

Our copper cathodes are high-purity refined copper sheets produced through electrorefining processes. Typically conforming to LME Grade A standards, they contain a minimum copper content of 99.99%, ensuring excellent electrical and thermal conductivity.

Copper cathodes serve as the primary raw material for producing a wide range of copper products, including electrical wires, cables, rods, tubes, and industrial components. They are widely used in power transmission, electronics, construction, and manufacturing industries due to their superior conductivity and reliability.

Key Features:

High-purity copper (minimum 99.99% Cu content)
Electrorefined to meet international standards (LME Grade A)
Excellent electrical and thermal conductivity
Uniform rectangular sheets with consistent weight and composition
Free from impurities and suitable for direct industrial use
Primary raw material for copper wire, rods, and tubing production
Widely used in electrical, construction, and industrial sectors
Available in bulk for wholesale and export supply
Carefully handled and packaged to maintain quality and integrity

Our Copper Cathodes are manufactured using advanced electrolytic refining technology and conform to LME Grade A quality standards with a minimum copper purity of 99.99%. These high-quality cathodes offer excellent electrical and thermal conductivity, superior corrosion resistance, and consistent chemical composition, making them ideal for the production of copper rods, wires, cables, electrical components, transformers, alloys, tubes, and various industrial products. Each batch undergoes strict quality inspections to ensure compliance with international standards. The cathodes are securely packed for export to prevent damage during transit and are available in bulk quantities with reliable delivery schedules. Customized packaging and shipment options can also be provided to meet specific buyer requirements and destination country regulations.

Copper Cathode Manufacturer Supply

We are a reliable manufacturer and supplier of highquality Copper Cathodes for industrial electrical construction and metal processing applications Our copper cathodes are produced and supplied with a focus on consistent purity excellent conductivity dimensional stability and dependable quality for international buyers

Our Copper Cathode is suitable for manufacturing copper wire cables sheets tubes rods electrical components transformers motors and various copperbased products High electrical and thermal conductivity makes it an excellent raw material for demanding industrial applications

Product Specifications
Product Name Copper Cathode
Copper Purity Up to 9999
Grade Grade A Industrial Grade
Copper Content 9995 or as agreed
Appearance Clean smooth coppercolored plates
Shape Rectangular cathode sheets
Standard ASTM EN IEC or buyer specification
Application Wire cable tube rod sheet electrical products
Electrical Conductivity Excellent
Thermal Conductivity High
Surface Clean and free from excessive contamination
Packaging Standard export bundles with secure strapping
Loading Container or bulk shipment according to order requirements
Origin Available according to supplier documentation
Inspection Quality inspection available before shipment
Customization Specifications and packaging can be arranged according to buyer requirements
Key Advantages

High copper purity and consistent quality
Excellent electrical and thermal conductivity
Suitable for largescale industrial production
Reliable raw material for copper processing
Exportready packaging and handling
Flexible order quantities subject to supplier terms
Quality inspection and documentation available

Packaging Shipping

Copper cathodes are securely bundled and packed for international transportation to help protect the material during loading handling and delivery Shipping arrangements can be made according to destination order quantity and buyer requirements

Why Choose Us

We focus on consistent product quality competitive supply professional communication and reliable order handling Our team can support buyers with product specifications inspection arrangements export documentation packaging options and shipping coordination

Clean copper wire scrap with high recovery value, based on Melbourne market scrap ranges. Suitable for recycling and remelting.

Clean Copper Wire Scrap- Advantages
High Copper Recovery: Clean, unalloyed copper wire scrap offers excellent recoverable copper content.
High Conductivity: Recycled copper retains the excellent electrical and thermal conductivity associated with copper.
Cost-Effective Raw Material: Provides manufacturers and recyclers with a valuable secondary source of copper.
Recyclable: Copper can be recycled repeatedly without significant loss of its essential properties.
Wide Industrial Demand: Used as a raw material for producing copper rods, wires, cables, tubes, and other copper products.
Easy Processing: Clean wire with minimal contamination can be efficiently sorted, processed, and recycled.
Environmentally Beneficial: Recycling copper reduces the need for primary mining and can lower energy consumption compared with producing copper from virgin ore.

We are manufacturing of Fiber Optic cable and accessories from INDONESIA.
Here the type and function for your reference:
1. G.657.A2 (Aerial cable capacity 1-2 core) for ACCESS NETWORK;
2. G.652.D (Aerial cable, Duct cable, Direct Buried cable, SCPT, ADSS cable with capacity 2-288 core) for DISTRIBUTION NETWORK;
3. G.655.C (Aerial cable, Duct cable, Direct Buried cable, ADSS cable capacity 2-288 core) for BACKBONE NETWORK;
4. G.654.E (Aerial cable, Duct cable, Direct Buried cable, ADSS cable capacity 2-288 core) for 3U (Ultra high speed, Ultra large capacity, Ultra long-haul);

Copper Cathodes are high-purity refined copper products produced through electrolytic refining and widely used as a primary raw material in electrical, electronics, construction, and manufacturing industries. Typically containing around 99.99% copper, they offer excellent electrical and thermal conductivity, corrosion resistance, ductility, and reliable processing performance. Copper cathodes are commonly supplied in standard cathode sheets or bundles and are suitable for producing copper rods, wires, cables, tubes, sheets, and various copper alloy products. Their consistent chemical composition and high purity make them an important internationally traded commodity for copper processors, smelters, manufacturers, and industrial raw-material buyers.

Key Specifications
Product Type: Electrolytic Copper Cathodes
Copper Purity: Minimum 99.99% Cu
Grade: Grade A
Form: Cathode Sheets
Surface: Clean, smooth, and metallic
Electrical Conductivity: Excellent
Typical Impurities: Controlled according to applicable Grade A specifications
Dimensions: As per producer/contract specification
Origin: Subject to supplier availability
Customization: Packing and lot requirements available

Grade A Electrolytic Copper Cathodes: 99.99% Cu minimum, assayed at 99.998% Cu

Grade A electrolytic copper cathode is refined copper produced by electrolytic refining, supplied from the Democratic Republic of the Congo. It is the standard feedstock for rod mills, wire and cable makers, brass mills and tube and strip fabricators.

INDICATIVE PRICING: LME copper cash reference less 3% to 6%, subject to final quotation. The displayed USD 13,795.44 to 14,235.72 per metric ton is an illustrative range calculated from a USD 14,676 LME cash reference for 28 October 2026. It is not a fixed or binding offer and does not update automatically. Final benchmark date, discount, inspection and other charges are agreed in writing.

SPECIFICATIONS
- Purity: 99.99% Cu minimum. Independent laboratory analysis by Alfred H Knight (AHK), issued September 2025, returned 99.998% Cu in all three lots tested.
- Impurities (ppm): S 3.9 to 6.0, Fe 3.2 to 4.2, Pb 1.8, Zn below 0.5 to 0.5, Te below 1.5, Sb, Si and Sn below 1.0. As, Bi, Cd, Co, Cr, Mn, Ni, P, Se and Ag all below 0.5.
- Cathode sheets: 914 x 914 mm, 12 mm thick.
- HS Code: 740311.

PACKING
Aluminum band bundles on pallets of 2 MT net (+/-1%), stuffed freely in 20' FCL. Each container carries 20 to 22.2 MT approx., with a minimum of 20 MT loaded at the port of loading.

QUALITY AND COMPLIANCE
Production is in compliance with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. Every cargo ships against an independent load-port inspection by SGS, Bureau Veritas, Alex Stewart or CCIC, and the independent load-port assay sets the contract grade. Conflict-free provenance certification and full export documentation accompany each shipment, with carbon footprint disclosure where applicable.

APPLICATIONS
Copper rod for wire, cable and busbar used in power grids, electric vehicles, renewable energy and buildings. Brass and bronze casting. Tube, strip and foil for electronics and plumbing.

SUPPLY AND TERMS
Motjuan supplies up to 5,000 MT per month, with a minimum order of 25 MT. Loading ports are Dar es Salaam, Tanzania and Durban, South Africa. FOB, with CIF to the buyer's nominated port on request. Delivery time: 15 to 25 days. Payment instrument: DLC / LC / TT. Our producing partner is an established exporter with a proven track record of delivering to international buyers, including China. Binding terms follow a signed Sales and Purchase Agreement.

MANDATES AND INTERMEDIARIES
We welcome mandates and intermediaries officially appointed by the end-buyer. Proof of appointment must be provided before any offer is released, as we undertake KYC and due diligence as required by UAE Federal Laws.

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Product description

This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings.

Features & application

Excellent optical, mechanical & environmental performance
Csm dielectric type û fiber reinforced plastic
High tensile strength
High crush strength
Aerial application
Application in lan, wan, especially in ftth networks
Easy to clamp and install
Can bear ice loads and high wind pressures.

Construction Parameters

Fiber Count 02 to 12 Fiber
Fiber Type G.652.D
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm
Nominal Cable Delivery Length (km) 2 KM + 3% .

Mechanical Characteristics

Tensile Strength (N) 600
Tensile Strength (N) (Installation) 1000
Crush Strength (N) 2,000
Minimum Bending Radius (mm) 75
Temperature Operating Range -10 to +70¦C.

Product description

This product description is for 08 fiber single mode double armored optical fiber cable designed to meet the technical requirements as mentioned as per specification documents, it fulfills the design for the applications desired therein. The design is based on stranded loose tube which provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This cable is suitable for both duct and direct buried applications, it provides extra strength and rodent protection by using double armor and two inner coats. The stranded loose tubes contain thixotropic jelly for protection of the optical fibers as required. The thixotropic jelly protects the fibers within the loose tubes and provides excellent quality filling compound for stopping ingress/transport of water into the cable. The product is manufactured on itu-t g.652.D fiber. It facilitates easy and economical installation.

Features & application

Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type v fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.

Construction parameters

Fiber count as per customer¦s requirement
No. Of loose tube to be designed to meet the specifications
No. Of fiber in each tube to be designed to meet the specifications.

Color of fibers as per tia/eia-598a
Loose tube material polybutylene terephthalate (pbt)
Loose tube filling material thixotropic jelly
Central strength member fiber reinforced plastic (frp) v non metallic
Core moisture protection methodology jelly filled construction
Peripheral strength member glass yarn
material medium density/high density polyethylene (mdpe/hdpe).

Product description

Polythene insulated jelly filled, un-armored telecommunication cables (10 to 2400 pairs with conductorsÆ dia of 0.4mm, 0.5mm, 0.6mm and 0.9mm) are manufactured on pakistan telecommunication company specifications lw-33 with reference to various international standards and specifications. Premier cables offers a wide range of telephone cables.

Application
This cable is usually used for direct buried applications for distribution in the exchange areas as local network and interexchange applications. It is a cable with solid polyethylene insulated unit twin jelly filled construction.

Construction
Conductor:
Solid annealed copperith conductor sizes of 0.4 & 0.6mm.
Insulation:
Colored high molecular weight solid high density polyethylene.
Color coding:
Cables are fully color coded in accordance with pic even count color code.
Twining/pairing:
Two colored insulated conductors are uniformly twisted together to form a pair. Varying lay length is designed to minimize the cross talk and capacitance unbalance.
Stranding / cabling:
Twisted pairs are assembled into unit of 25 pairs. When desired for lay-up reason, the units are divided into two or more sub-units, which are bind with durably colored polyethylene tapes to form a compact and circular cable.
Filling compound:
The water resistant filling compound is applied to the air space within the cable core.
Core covering:
A non-hygroscopic and dielectric polyester tape and water blocking tape are applied helically having a suitable overlap.
Flooding compound:
Sufficient flooding compound is applied between the core wrap and shield.

This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation.

The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.

The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members.

Features & application

Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type û fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.

Construction Parameters

Fiber Count As per CustomerÆs Requirement
No. of Loose Tube As per CustomerÆs Requirement
G.655 As per CustomerÆs Requirement
G.652 As per CustomerÆs Requirement
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP)
Armoring Corrugated Steel Tape Armoring
Peripheral Strength Member (if required) Aramid / Glass Yarn
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Outer Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.

The manufacturer of electromechanical products focused in the national and international market with the purpose of attending its clients in a rapid, efficient and effective manner all in an atmosphere of Total Quality, a decisive characteristic in an ever so demanding consumer reality. This was the start off point of a policy for constant improvement of the process to optimize commercial operations with our clients and suppliers.

In 2014 the company obtained ISO 9001:2008 which certifies quality within international parameter of its internal practice.

Professionals with more than 10 years’ experience, adequate inventory, operational logistics formulated to optimize commercial operations, and a well-trained sales team with know-how to solve daily technical queries.

In case of more complex necessities regarding our products or services, we offer competent technical support thus assuring reliability and security to our clients in a competitive, rapid, demanding, and ever changing market.

Our Mission:

Attend and exceed our customers’ and partners’ expectations furnishing products and services of high quality, reliability, and punctuality.

Vision:

Consolidate and fortify our trademark, nationally and internationally, as a first alternative in the “Electromechanical Products” market thru credible, ethical, and transparent commercial channels assuring loyalty and excellency in our services.


Catalog with complete product line is available to quotations

Hub and mid-drive BLDC motors for e-scooters, PMSM motors for e-rickshaws, 3-wheel cargo and light commercial EVs. Liquid or air cooled, with matched controllers available. Dyno-tested with efficiency maps. MOQ 20 pcs.

EV traction motors for two-wheelers (2W), three-wheelers (3W), and light commercial vehicles (LCVs) convert electrical energy into mechanical power to drive electric vehicles. Available in BLDC, permanent magnet synchronous motor (PMSM), and induction motor configurations, these motors can be supplied with different power ratings, torque outputs, voltage options, and mounting arrangements. Depending on vehicle requirements, designs may include hub motors or centrally mounted drive motors integrated with a transmission or reduction gearbox. Applications include electric scooters, motorcycles, rickshaws, cargo three-wheelers, and electric light commercial vehicles. Specifications should be selected according to vehicle load, operating conditions, efficiency targets, and controller compatibility.

Battery enclosures for 2W, 3W, passenger cars, buses and energy storage: extruded aluminium frames with FSW/MIG-welded floor plates, HPDC trays and stamped steel lids. IP67 sealed, helium leak-tested, with integrated cooling channels on request. Designed and validated to customer specs (ISO 12405, ECE R100 crush/vibration support). Project-based pricing by size.
EV battery pack housings and enclosures are engineered structures designed to contain and protect battery modules and associated components in electric vehicles and energy storage applications. Manufactured from aluminium alloys, steel, or other application-specific materials, they can be designed for strength, thermal management, vibration resistance, and protection against environmental exposure. Configurations may include battery trays, covers, mounting points, sealing interfaces, and provisions for cooling systems and electrical connections.

Fabricated enclosures and pedestals for AC and DC chargers, with cable management, locking doors, powder coating and optional branding. Custom sizes and kiosk designs. MOQ 10 pcs.
EV charging station enclosures and pedestals are designed to house, protect, and support electric vehicle charging equipment in residential, commercial, industrial, and public charging installations. Available in wall-mounted, floor-standing, and pedestal-mounted configurations, they can be manufactured from powder-coated steel, stainless steel, or aluminium, depending on the application. Design options include indoor and outdoor models, cable-management provisions, ventilation, access panels, and mounting brackets. Custom dimensions, cut-outs, finishes, and equipment layouts can be specified to suit different charger designs. Material, ingress protection, corrosion resistance, and electrical safety requirements should be selected according to the installation environment.

Field-oriented-control motor controllers for 2W/3W/LCV traction motors with regenerative braking, CAN communication, IP67 housings and over-temperature protection. Paired with our motors or customer motors. MOQ 20 pcs.
Motor Controllers and Inverters are electronic devices used to regulate the operation, speed, torque, or power conversion of electric motors. Variable Frequency Drives (VFDs) control AC motor speed by adjusting the output frequency and voltage, while other motor controllers may provide starting, stopping, reversing, and protection functions. Inverters can also convert DC power into AC power for motor operation or other electrical applications, depending on their design. These products are widely used in industrial machinery, pumps, fans, conveyors, HVAC systems, automation equipment, and renewable-energy installations. Selection depends on motor rating, supply voltage, phase, control method, and operating environment.

Ventilated and solid brake discs for passenger cars, SUVs and LCVs, cast in GG20/GG25 grey iron with balanced machining, anti-rust coating (geomet or black paint) and 100% runout inspection. Manufactured in IATF 16949 certified plants with chemical and hardness reports per heat. Available for European, Japanese, Korean and Indian OEM applications; OEM cross-reference list on request. MOQ 200 pcs per part number; packed in individual boxes, palletised.

Turbocharger core assemblies (CHRA), turbine housings, compressor wheels and bearing housings for diesel passenger cars, LCVs and HCVs. High-speed balanced; cross-referenced to Garrett, BorgWarner, Holset and MHI numbers. MOQ 20 pcs.
Turbocharger Components and Cartridges are precision-engineered parts used in turbocharging systems to increase engine air intake and support improved engine performance. A turbocharger cartridge, commonly called a CHRA (Center Housing Rotating Assembly), typically includes the turbine shaft, compressor wheel, bearings, and center housing assembly. Other components may include turbine housings, compressor housings, actuator parts, seals, and repair kits. These products are used in passenger vehicles, commercial trucks, buses, agricultural machinery, construction equipment, and industrial diesel engines. Compatibility depends on turbocharger model, dimensions, shaft configuration, and engine specifications, so part numbers and technical measurements should be verified before ordering.

Aluminium brazed radiators, charge-air coolers and condensers for passenger cars, LCVs, tractors and gensets. Helium leak-tested, pressure-cycle tested; plastic or aluminium tanks. OE-fit applications and custom industrial sizes. MOQ 20 pcs.
Aluminium Brazed Radiators and Intercoolers are heat-exchange components manufactured using aluminium cores and brazed joints to provide efficient thermal transfer and compact construction. Radiators help dissipate engine coolant heat, while intercoolers reduce the temperature of compressed intake air in turbocharged or supercharged engines. These components are used in passenger vehicles, commercial trucks, buses, agricultural machinery, construction equipment, and industrial engine systems. Available in different core dimensions, fin configurations, tube designs, and mounting arrangements, they can be specified for particular engine and operating requirements. Buyers should confirm compatibility, pressure ratings, cooling capacity, and connection dimensions before ordering.

E-AYY
PVC Insulated Cable with Aluminium Conductor

This power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

E-AYY
PVC Insulated Cable with Aluminium Conductor

This power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

Material - GI
Shape - V Shape
Thickness - 2mm
Country of Origin - Made in India
Length - 12 m
Finishing - Hot Dip Galvanized

Hot Dip GI Angle

Length Of Rod - 3mete
Usage/Application - Earthing
Material -Copper
Diameter - 17mm
Features - Corrosion Resistance
Country of Origin - Made in India
Purity - 99%

Copper Earthing Rod

Length Of Rod - 1000mm
Usage/Application - Earthing
Material - Galvanized Iron (GI)
Country of Origin - Made in India
Finishing - Hot Dip Galvanized
Feature - Corrosion Resistant

GI Earthing Rod

Size - 600x600mm
Thickness - 3mm
Shape - Square
Usage/Application - Earthing
Material - Copper
Country of Origin - Made in India
Cu Content - 99.9%

Copper Earthing Plate

Usage/Application - Earthing
Material - Galvanized Iron (GI)
Diameter - 20mm
Features - Corrosion Resistant
Country of Origin - Made in India
Length - 3meter

Earthing pipes are known as earthing electrode pipes, these are suitable for all types of installation right from domestic to power stations. These are widely used in electrical installation, transmission line in transformer earthing and other such applications.Earthing Electrode used in various industries and for the various purpose.

These earthing electrodes are manufactured by high grade raw materials and by officials are expert in their field. We follow strict measures while manufacturing earthing system.

Material - Copper
Technique -Hot Rolled
Single Piece Length - 3 meter
Shape - Rectangular
Thickness - 5mm
Country of Origin - Made in India

Copper Earthing Flat

Usage/Application - Earthing
Material - Mild Steel
Finish -Hot Dip Galvanized
Country of Origin - Made in India
Thickness - 3mm
Strips Length - 5m

We are manufacturing and supplying earthing flat that are manufactured using qualitative range of iron and steel. To meet the specific requirements of our clients, we also offer these earthing strips in customization facility based on different parameters. Our range of G I earthing strips are widely used for Earth protection.

We are providing earthing to the various area like industrial, residential, commercial, etc. Our stripes are usually used for providing a stable platform for operation of sensitive equipment. Our professionals use galvanized iron for manufacturing these strips. These are known for their lowest resistance value owing to which it can easily pass out the current to the earth.

Surface Finish - Hot Dip Galvanized
Dimension - 400x300mm
Features - Corrosion Resiatnce
Material - GI
Shape - Rectangular
Country of Origin - Made in India

Hot Dip GI Plates

Antenna/Tower Height - 40m
Material -MS
Country of Origin - Made in India
Surface Finish - Hot Dip Galvanized
Feature - Corrosion Resistant

Telecom Tower