Dell 19 E Series Monitor : Diagonal Viewing Size: 47.01 cm 18.5 inches (18.5-inch wide viewable image size) Aspect Ratio Widescreen (16:9) Panel Type, Surface: TN (Twisted Nematic), anti glare with hard coat 3H Optimal Resolution: 1366 x 768 at 60 Hz Viewable Image Dimension (H x W): 409.8 mm x 230.4 mm 16.13" x 9.07" Contrast Ratio: 600 to 1 (typical) Backlight Technology: LED Brightness: 200 cd/m2 (typical) Response Time: 5 ms (back to white) Viewing Angle: (65° vertical /90° horizontal) Adjustability: Tilt only Color Support: Color Gamut (typical): 83% (CIE 1976)1 Color Depth: 16.7 million colors Built-in Devices: Dell Display Manager Pixel Pitch: 0.30 mm Display Type: Widescreen Flat Panel Display Flat Panel Mount Interface: VESA (100 mm) mounting holes for flexible mounting solutions Display Screen Coating: Antiglare with hard-coating 3H Audio Output: Optional Dell Soundbar (Model #AC511)
I posted below a load of LCD Monitors that is currently available and looking for best offers only. The load is packaged in 40 gaylord boxes and will fill a 40' HC container. I attached our grading chart which details each grade in this load with associated pictures. I also attached pictures of this stock for your easy reference. LCD stands will be included with the load, but since they are removed we cannot guarantee all stands match the LCD monitors in this load. Grade A LCD Monitors 19" Widescreen 730 units 22 Widescreen 528 units 24 Widescreen 148 units Grade B LCD Monitors 19 Widescreen 546 units 22 Widescreen 558 units 24 Widescreen 116 units Total Quantity: 2,626 units
Posted below is a breakdown of a load of tested working LCD Monitors that is available. Each load is packaged in 40 gaylord boxes and will fill a 40' HC container. We can add LCD stands to this load prior to shipment if required. Please inform us if stands are required while making offers. Due to the fact that not 100% of the LCD Monitors include stands as they are processed in, we cannot guarantee that all units will include a stand. However, we will be sure to load as many stands that came from this stock. Load #2 Grade B LCD Monitors 19" Regular - 1,042 units 19" Widescreen - 1,378 units 22" Widescreen - 700 units Total Quantity: 3,120
Posted below is a breakdown of a load of tested working LCD Monitors that is available. Each load is packaged in 40 gaylord boxes and will fill a 40' HC container. We can add LCD stands to this load prior to shipment if required. Please inform us if stands are required while making offers. Due to the fact that not 100% of the LCD Monitors include stands as they are processed in, we cannot guarantee that all units will include a stand. However, we will be sure to load as many stands that came from this stock. Load #1 Grade A LCD Monitors 19" Regular - 1,016 units 19" Widescreen - 1,560 units 22" Widescreen - 544 units 24" Widescreen - 134 units Total Quantity: 3,254
Divanti Group is a large supplier of used LCD Monitors. Our current monthly production is 35,000 units. Our LCD Monitors have been thoroughly tested to ensure they are able to be reused or remanufactured. Our production facility produces full loads of Grade A or Grade B LCDs. After our testing process, we sort and package by size of the screen (15", 17", 19" 4.3, 19" Wide, 20" Wide, 22" Wide, 23" Wide, 24" Wide). We typically sell our loads as mixed sizes, but we are also capable of selling custom loads with select sizes and quantities as inventory becomes available. Feel free to contact us for more information regarding our LCD products. Thank you.
Divanti Group is a large processor of used LCD/ LED Monitor panels. Our current monthly production is 35,000 panels. Our LCD/LED Panels have been thoroughly tested to ensure they are able to be reused or remanufactured. After our testing process, we sort and package by size of the screen (15", 17", 19"-21" Regular, 19"-21" Widescreen & 22" and Larger Widescreen). Our packaging department is able to package the panels in bulk boxes or for additional charges we can use custom packaging if required. We typically sell our loads as mixed size panels, but we are also capable of selling custom loads with select sizes and quantities as inventory becomes available. I attached some sample pictures as our LCD panels were tested for your reference. Feel free to contact us for more information regarding our LCD products. Thank you, Scott
Dell 27 P Series Monitor : Diagonally Viewable Size: 68.6 cm 27" (27-inch wide viewable image size) Panel Type, Surface: In-plane switching, anti glare with hard coat 3H Optimal resolution: 1920 x 1080 at 60 Hz Contrast Ratio: 1000: 1 (typical) 2 Million:1 (Max) (Dynamic Contrast Ratio) Brightness: 300 cd/m2 (typical) Response Time: 8 ms (gray to gray) Max Viewing Angle: (178° vertical / 178° horizontal) Color Support: 16.7 million colors Pixel Pitch: 0.1 mm Panel Backlight: LED Display Type: Widescreen Flat Panel Display
Dell 20 P Series Monitor : Diagonally Viewable Size: 49.4 cm 19.5" (19.5-inch wide viewable image size) Aspect Ratio: Widescreen (16:9) Panel Type, Surface: In-plane switching, anti glare with hard coat 3H Optimal resolution: 1600 x 900 at 60 Hz Contrast Ratio: 1000: 1 (typical) 2 Million:1 (Max) (Dynamic Contrast Ratio) Brightness: 250 cd/m2 (typical) Response Time: 8 ms (gray to gray with Overdrive) Max Viewing Angle: (178° vertical / 178° horizontal) Color Support: 16.7 million colors Pixel Pitch: 0.2712(H)mm x 0.2626(V) mm Panel Backlight: LED Display Type: Widescreen Flat Panel Display
Dell 22 P Series Monitor : Diagonally Viewable Size: 54.61 cm 21.5 Inches (21.5-inch wide viewable image size) Aspect Ratio: Widescreen (16:9) Panel Type, Surface: In-plane switching, anti glare with hard coat 3H Optimal resolution: 1920 x 1080 at 60 Hz Contrast Ratio: 1000: 1 (typical) Dynamic Contrast Ratio : 2 Million:1 (Max) Brightness: 250 cd/m2 (typical) Response Time: 8 ms (gray to gray) Max Viewing Angle: (178° vertical / 178° horizontal) Color Support: 16.7 million colors Pixel Pitch: 0.248 mm Panel Backlight: LED Display Type: Widescreen Flat Panel Display
Eucalyptus essential oil available both in bulk and small quantities according to request. 100% pure and natural oil from steam distilled eucalyptus leaves. Two different species E kochii which is between 90% and 95% cineole and E loxophleba lissophloia which is between 70% and 75% cineole. High cineol eucalyptus oil, strong Camphoraceous fragrance, steam distilled. Every batch produced from a single plant clone, organic 100% pure natural product. Price depends on quantity, oil analysis and samples available after request. Every step of the process from plantation to harvest is closely monitored by field expert scientists ensuring that all of our production meets all international quality standards and regulations. Our distillation mills are equipped with the latest technology ensuring top quality in every drop. All of our essential oils are maintained in special conditions in a controlled environment where experienced personnel constantly monitor the temperature and humidity of the storage. Every production is made from a single plant clone and has a specific batch number assigned to it for optimal monitoring. At the center of our activities is our love for nature and natural products, which guides us to handle everything with care to our planet, offering our clients pure and Eco friendly products. Our farms and distillation mills are located in Greece and Bulgaria while our sales and management headquarters are based in South Australia. By choosing us you will enjoy worldwide shipping, great customer service and environmental friendly top quality natural products. We value every one of our customers individually ensuring personal contact with every interaction and are proud that all of our clients that started working with us stayed with us forming a long lasting relationship. We provide every service related to essential oils from 5ml to 1000kg, shipping anywhere in the world, offering private labeling and bulk sales. Only UN approved packaging is used for our products ensuring top quality and safety and every step of the process is done by the book.
Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of a microorganism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, the packing of desiccated coconut. End Of Use:- Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture: 5% max FFA : 0.3% max Fat content: 62% min for high fat and 30 % +/- 5 % for low fat SO2: 100ppm max E-coli & Salmonella: negative. Natural white, free from foreign matter. Flavour: Mild, fresh and sweet characteristic of coconut with no off-flavour and odour Contact us for More Inquiry
Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of microorganism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, the packing of desiccated coconut. End Of Use:- Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture: 3% max FFA : 0.3% max Fat content: 62% min for high fat and 30 % +/- 5 % for low fat SO2: 100ppm max E-coli & Salmonella: negative. Natural white, free from foreign matter. Flavor: Mild, fresh and sweet characteristic of coconut with no off-flavor and odor Contact us for More Inquiry
Desiccated coconut We Have Quality Desiccated Coconut Powder The processes of desiccated coconut are as below: Removal of coconut husk, Removal of coconut shell, Removal of thick brown coconut skin, Washing of white coconut meat to remove foreign material, Blanching of white coconut meat to reduce the number of microorganism to the safe level fit for human consumption within its shelf life, Cutting of white coconut meat into the desired size ( will be medium and fine size levels ) Hot air blow drying the grated white coconut meat to reduce the moisture content from 19% to less than 3%, Cooling of desiccated coconut, Sieving of desiccated coconut to separate desiccated coconut as according to the desired size, Finally, the packing of desiccated coconut. End Of Use:- Fillers inside Chocolate Bars Ingredients in biscuits, Toffees, and Chocolates Cake Decorations Baking Industry Snacks Frozen Food Industry, Ice Cream Specification: Moisture : 3% max FFA : 0.3% max Fat content: 62% min for high fat and 30 % +/- 5 % for low fat SO2: 100ppm max E-coli & Salmonella: negative. Natural white, free from foreign matter. Flavor: Mild, fresh and sweet characteristic of coconut with no off-flavor and odor Contact us for More Inquiry
Contains omega-3 (up to 12%) and omega-6 (up to 19%), eicosanoic acid (up to 14%), erucic acid (up to 50%), oleic acid (up to 30%). Contains vitamin complex: group B vitamins, vitamins E, K, D, A, P. Helps to stay away from coronary heart diseases It can be used as an antibacterial oil Helps to detoxify human body Helps to reduce hair fall through improved blood circulation if it is massaged on scalp Stimulates digestion, circulation and excretory system It can be used as an irritant for stimulating sensation in senseless organs and muscles. Irritants are also useful for driving up muscles. Helps preventing fungal growth, thus it can be used as anti-fungal Helps in winter for making body warm and
EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and a wide temperature range
Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installationï¼? Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".