MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1). Qualifications: PCD: NXP RC531, RC632; RC400, RC500(select) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: USB DC5V Power consumption: 150mA LED: four LED (red, green, blue, yellow) Dimension: 123mm ¡Á 88mm ¡Á 25mm Weight: About 200g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF.
MF1 IC S50 The ever-popular MF1 1K chip card from Philips, also known as MF1 Classic. accordingto the ISO 14443A standard. contains 1Kbytes of read/write memory that canbe used for multiple applications. 1. Electric feature: Contactless transmission of data and supply energy (no battery needed) Operating distance:Up to 100mm (depending on antenna geometry) Operating frequency:13.56 MHz Fast data transfer:106 kbit/s High data integrity:16 Bit CRC,parity,bit coding,bit counting True anticollision Typical ticketing transaction:< 100 ms (including backup management) 2.EEPROM 1 Kbyte,organized in 16 sectors with 4 blocks of 16 bytes each (one block consists of 16 byte) User definable access conditions for each memory block Data retention of 10 years Write endurance 100.000 cycles 3.Security Mutual three pass authentication (ISO/IEC DIS9798-2) Data encryption on RF-channel with replay attack protection Individual sert of two keys per sector (per application) to support multi-application with key hierarchy Unique serial number for each device Transport key protects access to EEPROM on chip delivery 4.Physical Feture: A)Card material: PVC, polyester, ABS, PET, PETG, combination B) Card size: CR80 (54 x 85. 6mm), CR50, custom size C) Options: hole punch, signature panel, loco or hico mag. strip, foil, hologram image, magnetic strip D) Color: white glossy, white matte, custom color finish, custom photo overlay E) Chip available:original MF1 S50, S70 or compatible chinese chip F) Applications: certificate ID card, access control, transportation, LNG, library, parking Shipping Weight: 0.006KG/PCS Disclaimer:The picture related to this product are provided for reference only. We do not have intellectual property rights over the trademark(s) This/these trademarks are not contained when displaying or selling. Pack according to your instructions
Material PVC Dimension 85.60 x 54.00mm (credit card size ,CR80 or customization) Thickness 0.3mm, 0.5mm, 0.6mm, 0.84mm (0.3mm to 1.5mm upon request) Frequency 13.56MHz Encoding Available Printing Offset Printing, Silk-Screen Printing Card Surface Matt/Glossy Finish Package 200PCS/Box, Box Size: 21.5*9*5.5CM; 2000PCS/Carton, Size: 49.5*24.5*13.6CM, 14KG/Carton; Applications Membership Management, Access Control, Hotel, Transportation, Loyalty, Promotion, etc. Available Crafts 1. signature panel and scratch panel 2. Offset print Pantone color 3. barcode in different types(39/EAN 13/EAN 128...) + QR Code 4. hot stamping gold/silver color 5. hologram as required 6. personalization: Emboss or thermal print Card Number, member name & expiry date etc
1) IC: Philips Mifare 1 S50 2) Storage capacity: 8Kbit 3) Speed: 106Kbound 4) Read/write time: 1-2Ms 5) Working temperature: -20C-85C 6) Erase-write: >100000 times 7) Data storage: >10 years 8) Frequency: 13.56MHz 9) Induction range: 2.5-10cm, 10) Specification: 0.87x85.5x54/non-standard card, 11) Material: PVC, PET, 0.13 copper cash 12) Application: Subway, identification, school, parking lot, bar. Specification: 0.87x85.5x54/non-standard card.
Shenzhen intelligence card is located in dakan technology park xili , shenzhen city guangdong provence . With advanced production lines, technologies, and employee of high-caliber, depending on our employee's strength and intelligence, we believe in the value of ¡®credibility, entrepreneurism, practicality, creativity¡¯ to build up ¡®xinye card¡¯ brand. In the fierce competition of the contactless smart-card market, we acquire four patents and obtain excellent results in the product quality, biggest overseas orders and product sale. When the rfid market still germinates in china, we imported the top-ranking rfid production line, with which we hold the largest throughput at present. We specialize in the smart card and rfid application, readers, and system integration solution, provide a top-rank design, product, and service. Our experience of self-formation is also an experience to interact with our customers, during which we planted diligence to harvest acceptance and fame. We hereby express sincere thanks to all customers and our friends.An even-brighter future .Following the scientific development theory, we manufacture the smart cards, rfid labels and research the system integration, to try to become a comparatively famous company in this industry. Credibility is a foundation of our company's survival and development, which is our consistent idea to the customers;the customers are " parents of basic necessities of life " of our company.To make the customers satisfactory is the goal that our company pursues all the time. At the time of thorough globalization, we are striving to make our company a reliable supplier of consistent service to all customers, thus to contribute to the modernization of our country and our customer. In standard box
Applications: bus, taxi, metro, highway, supermarkets, gas station, kiosk, store, theater and so on fast payments fields Government, institution, company, factory, school, hospital, hotel Urban public transportation ticket payment system, company shuttle bus ticket payment system, school shuttle bus payment system Features: made of industrial grade material, fully adapt to special circumstances on bus Sealed, dust-proof, waterproof, shockproof and anti-electromagnetic interference Dedicated stable power supply, voltage overload protection With the most advanced Linux system, high-definition LCD display Wi-Fi communication + USB data acquisition, support remote upgrading Contactless smart card, read/write capability, light display for reading card Live voice prompts, supports 15 kinds of voice prompts: such as "student card", "employee card" Supports MIFARE® 1 card, CPU card, supports PBOC3.0 bank standards With Thermal printing module, can connect to POS58 slip printer Optional GPS positioning module, for global positioning satellite positioning Great stability of data storage, data kept as long as 10 years even with power outage Card capacity: 91,880,000pcs Can check the nearest 20 records, to prevent ticket payment dispute Technical specifications: Model: handheld POS machine Linux system for urban bus transportation management Dimensions: 200*151*61.5mm Material: engineering plastics, anti-static electricity coating design, be protected from high-frequency interference Display: 3.5-inch LCD display, 320x240 Operating system: Linux 2.6 system CPU: N32905 processor, ARM9 core @ 240MHz Memory: 32MBytes SDRAM, 128MB NAND flash Data capacity: 259840pcs of detailed data for console storage, unlimited data at GPRS storage Card capacity: 91,880,000pcs Working voltage: DC 8-50V Operating temperatures: -25-65°C Storage temperatures: -40-85°C Humidity range: 0-90% RH non condensing Pilot lamp: red, green light Sound prompt: buzzer, single channel speaker (voice report) RFID: can read and write ISO 1443 type A/B electronic tag (incl. combi-card) Supporting card: MIFARE® 1 card, CPU card, UnionPay IC card Frequency: 13.56MHz Interfaces/connectors: RS232, USB Printer modules: can be connected to slip printer-POS58 Positioning mode: GPS Communication modules: GPRS (900MHz/1800MHz), or CDMA (800MHz) Wi-Fi: supporting 802.11n/b/g standards, 150Mbps, 2.4Ghz UnionPay: compatible for PBOC3.0 UnionPay card MIFARE and MIFARE Classic are trademarks of NXP B.V. http://cardlan.manufacturer.globalsources.com/si/6008848992593/pdtl/IC-card/1150201430/Onboard-Bus-Ticket-Validator.htm
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm¡Á21mm¡Á8mm Package: DIP32 Weight: about 15g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 30 pcs per box, box size: 16cm*12cm*5cm.
The capacity of the chips ranges between 1kbit and 64kbit. Operating frequency: 1mhz(5v) 1zhz(2.7v) 400khz(1.8v) Operating voltage: 5v, min 1.8v if require Write\erase: 1, 000, 000 times Data retention: 100yares Application area: data storage, phone card, campus card and so on The logical encryption cards are widely used in medical insurance, data storage, net bar toll, door-control and so on. The chips we adopt include siemens series and atmel series, the capacity range between 2k bit and 16k bit. Signature applications of contact ic card:
We mainly adopt the Mifare Classic 1K with 1 Kbytes Eeprom read/write memory and Mifare Classic 4K with 4 Kbytes of EEPROM read/write memory. They are compatible with existing MIFARE infrastructures. Operating in accordance with ISO 14443A, Mifare 4K functions at a distance of up to 10 cm with true anti-collision properties and without the need for a battery. The Mifare classic family is the pioneer and front runner in contactless smart card ICs operating in the 13.56 MHz frequency range with read/write capability We also make the I-code SL2, Mifare Ultralight, Ultralight C, Mifare Desfire D21D41D81, ISSI24C16, ISSI24C02, ISSI24C64, Mifare Plus 2k4k, EM4200, EM4450, EM4305 etc. 200pcs per box , 2000pcs per carton. Each carton gross 27.5kg.
Contactless card is also called rf(radio-wave frequency) card. Our contactless card has adopted the most advanced american ait process. The core of ait technology is inlay embedding and module welding. The inlay is embedded into the pvc sheet accurately by ultrasonic measurement and then the module and the inlay are welded within nitrogen gas surrounding. Signature applications of thermal rewrite card:
Introduction: The rewrite card is a card with thermo rewrite film covered over the pvc or pet card in accordance with ISO7816. The consumption record and promotion information can be typed on the thermo rewrite film when the custom consumed with card. Next time the information can be erased and rewrite. It is convenient, not only for the custom to look over the consume record, but also for business to renew the promotion information. The rewrite card has been widely used in the lines of entertainment, retail sail, oil system, hotel, aviation and so on. Key features: Consume record can be typed directly on the card and convenient for the custom to look over. The card information can be erased and retype over and over, remaining for a long time. Different colors of materials are for choice, the typing range can be set differently, too. The visual information is personalized, tasteful and fashionable. Guarantee the consumers benefit effectively. Improve the effect of advertisements; increase the customs interest to consume with card. Application: Prepaid card, bonus point card, appointment/ booking card, security access control card, loyalty/ vie card, parking card, student id card, visitor& employee id card, lucky draw/ game card, gift card, ski pass card, and so on.
The logical encryption cards are widely used in medical insurance, data storage, net bar toll, door-control and so on. The chips we adopt include Sidemen's series and ATMEL series, the capacity range between 2k bit and 16k bit.
Typical applications: Transportation Government Home -banking Health care 180; medical identification. Signature applications of IC card:
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, normal distance) SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 180mA Dimension: 141mm¡Á100mm¡Á31mm Weight: about 100g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF. 1 pc/box, box size: 16*12*5cm.
Contact IC card, contactless IC card, rewritable card, magnetic card, scritch card, bar code card, phone card, IC card reader & writer, rewritable card printer..
. Mifare 1k card . Mifare 4k card . Mifare 4k Desfire . Icode SLI (MOA2) . Icode SLI . Hitag . EM - Proximity card . Ultralite 512bit Mifare . 1kb contactless card . Proximity card . 1k Inlays . Pesonalization of card 5000 nos.