Product Description Tubular Plate Battery 2V 250AH (OPzS250-2) Specifications The OPzS battery is a traditional tubular plate flooded battery which offers 20 years design life with a cycle life of 1800 cycles at 80% Deep Of Discharge. This range is most suited for all standby power applications that require the highest levels of reliability and security. Characters 1. Use gel electrolyte, with nice performance on wide temperature range, suitable for harsh environments coperation. (-40�º C~60�º C) 2. Made by tubular positive plate materials, monthly self-discharge rateâ?¤ 1.5% 3. Excellent recover ability of Cycling and deep discharge, more than 800 times cycle life at 100% deep discharge, improve the system reliability effectively. 4. Floaing design life time up to 20 years, in the coperation of normal float charging, capacity keeps stable, attenuation rate stays low. Application Wind power system, Solar power system, Emergency lighting alarm systems, UPS(Uninterruptible power sypply) Telecommunications, Telephone exchanges control equipment, EPS instrumentation, Bank ATM System, Medical equipment, Fire and security system and so on. Capacity 77�°F(25�ºC) 100 hours rate(3.00A 1.85V) 300Ah 10 hours rate(25.0A 1.80V) 250Ah 5 hours rate(42.0A 1.80V) 210Ah 3 hours rate(62.5A 1.75V) 187Ah 1 hour rate(132.0A 1.67V) 132Ah Internal Resistance Full charged battery 77�°F(25�ºC):0.0008�© Capacity affected by Temperature (10 hour rate) 104�°F(40�ºC) 102% 77�°F(25�ºC) 100% 32�°F(0�ºC) 85% 5�°F(-15�ºC) 65% Self-Discharge 68�°F(20�ºC) Capacity after 3 month storage 90% Capacity after 6 month storage 80% Capacity after 12 month storage 60% Max discharge current77�°F(25�ºC):1250A(5S) Charge (Constant Voltage) Float:2.23 to 2.27V/77�°F/(25�ºC) Cycle:2.38 to 2.42V/77�°F/(25�ºC) Max Current:25A
These batteries plates are precisely designed to provide efficiency to the batteries. These plates are highly durable and require very low maintenance service. They can be availed in different series to match up the different requirements of the customers.
The plate is suitable for 12n6.5l-bs battery 54*62
All type of Battery plate Manufacturer
Sealed battery lead plate /lead acid battery plate/ lead plate for VRLAbattery /sealed maintenance free UPS battery plate / AGM battery plate.Large/ middle/small type sealed battery lead plate: Long service life:uniquie design and special lead calcium alloy, have overcome the early capacity decreasing defect of the lead calcium alloy and ordinary lower antimony alloy and had out standing extension of the cycle life and floating charge life. Low Self-discharge:Adopting high purity material, producing with strict process, so the monthly-self-discharging rate at: 2% under the room temperature. Excellent quality: Using high performance technology formula, with good advantage of the high energy ratio, deep charged and discharge high performance, good charge acceptance and so on. More choices:More that 380 kinds of specifications of valve regulated lead acid battery plates, strong production ability do our utmost to supply customerss wanted
Pakistan Accumulators (Pvt) Ltd is the first company in Pakistan to manufacture of Tubular Plate Flooded Lead Acid Batteries (Deep Cycle, Solar & UPS applications). The production design of this battery is dissimilar to the existing SLI and UPS batteries. It has a Tubular Plate for positive and a thick negative plate for enhancing life of battery.
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
The Dry Battery PTZ7L - 12V - 7Ah is a Valve Regulated Lead Acid sealed lead acid battery (referred to as VRLA) designed by AGM technology. AGM technology uses an Absorbed Glass Mat as a barrier; the electrolyte solution is absorbed at the plate, and the diaphragm is faster. Lead alloy composition and special additives suitable for starting purposes Advanced technology with an acid-free regulator valve, safe for users and vehicles. Outstanding advantages of the Dong Nai Maintenance-Free Dry Battery (VRLA) PTZ7A (12Vâ??7Ah) Specially designed for motorcycles. The most advanced technology for high performance, increased battery start-up, and service life Completely free of maintenance during use. Anti-shake design, suitable for all different terrain conditions.
Used Batteries scrap Brand Name Battery Scrap Model Number ISRI 200-206 Type Lead Battery Plate Scrap Pb Content (%) 99.95% Product Name Drained Battery Scrap Material Car Battery Battery scrap Lead Acid Auto Battery Scrap Type All kind of scrap brand Batteries Fe Content HMS Color Black/ Multi color Quality GRADE AAA Size 151*65*94mm Polypropylene 5 - 8 Sulphuric acid (10 - 20 % H2SO4) 10 - 15
Titanium bipolar plates are a high performance component designed for battery fuel cell systems. It is made of high-purity titanium material with excellent mechanical properties, corrosion resistance and electrical conductivity, providing reliable support and excellent performance for fuel cells. Through advanced manufacturing process, titanium bipolar plates ensure high precision and consistency, with flat surface and fine processing to ensure the stable operation of the battery fuel cell system and provide the best gas and liquid sealing performance. The main advantages of titanium bipolar plates are their lightweight design, high electrical conductivity and corrosion resistance. The lightweight nature of titanium reduces the weight of the entire battery fuel cell system, helping to improve energy efficiency. Its excellent electrical conductivity ensures effective current conduction, reduces energy loss, and improves system efficiency and response speed. In addition, the corrosion resistance of titanium material enables it to resist the erosion of corrosive substances such as acid and alkali in harsh environments and prolong the service life of the system. Parameter Material: titanium Size: according to the drawing Type: Etching / Chemical Machining, Other Machining Services Etching accuracy: Line width: 0.01mm; Aperture: 0.03mm; Tolerance: �±0.01mm
Titanium bipolar plates are a high performance component designed for battery fuel cell systems. It is made of high-purity titanium material with excellent mechanical properties, corrosion resistance and electrical conductivity, providing reliable support and excellent performance for fuel cells. Through advanced manufacturing process, titanium bipolar plates ensure high precision and consistency, with flat surface and fine processing to ensure the stable operation of the battery fuel cell system and provide the best gas and liquid sealing performance. Parameter Material: titanium Size: according to the drawing Type: Etching / Chemical Machining, Other Machining Services Etching accuracy: Line width: 0.01mm; Aperture: 0.03mm; Tolerance: �±0.01mm Features 1.Lightweight design: The titanium bipolar plate is made of titanium material, which has the characteristics of light weight. Compared with traditional metal materials, such as steel, titanium material has a lower density, so it can reduce the overall weight of the fuel cell system. This is especially important for automotive and other mobile applications, improving energy efficiency and driving range. 2.High Electrical Conductivity: Titanium bipolar plates have excellent electrical conductivity and can effectively conduct electric current. This helps reduce energy loss and increases the efficiency and responsiveness of the fuel cell system. Good electrical conductivity can also help maintain stable current distribution and balance, and improve the operating stability of the system. 3.Corrosion resistance: Titanium material has excellent corrosion resistance and can resist the erosion of corrosive substances such as acid and alkali. In fuel cells, where acidic or alkaline environments are involved, the use of titanium bipolar plates can provide longer life and reduce maintenance requirements. 4.High temperature resistance: Titanium bipolar plates can maintain stable performance under high temperature conditions. Some parts of the fuel cell system may be exposed to high temperature environments, such as inside the fuel cell stack. Titanium's high temperature resistance makes it ideal for reliable operation in these demanding conditions.
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly. Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
1. Quick Details: Place of Origin: Guangdong, China (Mainland) Brand Name: EverExceed Model Number: XHP 300 Usage: Power plant, plane Voltage: 1.2V Sealed Type: vented Maintenance Type: Low Rate Size: 164*167*345MM Weight: 13.80KG Nominal Capacity: 300AH Container: ABS/PP/PA Color: Transparent Plate type: sintered plate Battery Type: Nickel cadmium battery Electrolyte: KOH+LiOH Design life: 20+ years Shelf life: 5 years in dry condition Connector: Flexible cable Certificate: ISO/CE/IEC/TUV/DERKA Standard: IEC60623 2. Packaging & Delivery Packaging Details: packed in plywood cases Delivery Detail: Shipped in 56 days after payment
1.Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: EverExceed Model Number: XHP 250 Usage: Power plant, plane Voltage: 1.2V Sealed Type: vented Maintenance Type: Low Rate Size: 107*165*348MM Weight: 10.90KG Nominal Capacity: 250AH Container: ABS/PP/PA Color: Transparent Plate type: sintered plate Battery Type: Nickel cadmium battery Electrolyte: KOH+LiOH Design life: 20+ years Shelf life: 5 years in dry condition Connector: Flexible cable Certificate: ISO/CE/IEC/TUV/DERKA Standard: IEC60623 2. 1.2V 250AH EverExceed NiCd XHP series Sintered plate with big starting current NICD battery. EverExceed safe and reliable NiCd batteries including: 1) Nickel Cadmium Batteries: Pocket plate cells / sintered plate cells/ PBE plate cells 2) Nickel Iron Batteries: ideal green energy storage solution for solar/ wind/ hybrid applications 3) Aviation batteries / Military batteries: EverExceed full range of ultra low maintenance rechargeable NiCd batteries provide the best life cycle cost with long life duration, high quality and reduced maintenance. Ever Hot sell EverExceed Sintered Plate XHP series 80Ah battery with ABS container 3. Packaging & Delivery Packaging Details: packed in plywood cases Delivery Detail: Shipped in 56 days after payment
Basic Info. Model NO. PST12-12 Installation Packaged Rechargeable Chargeable Size 151*98*94mm Weight 3.43kg Color Black / Dark Gray Cell 3 Sealing Glue Sealing Separator AGM Flat Plate Plate Battery Case ABS Terminal Lead Safety Explosion-Proof Transport Package Carton, Then Pallet Specification CE/ FCC Trademark Pustun Origin China HS Code 8507200000 Production Capacity 2000 PCS/Day Product Description Maintenance Free Sealed Lead Acid Storage Battery, Deep Cycle AGM Type VRLA Battery for UPS, Solar Power System, Wind Renewable Energy, PV Application, Emergency Lighting, CCTV, Street Light, Fire & Security Alarm, Medical Equipment and so on.
Basic Info. Model NO. PST200-12 Installation Packaged Rechargeable Chargeable Size 522*239*2180mm Weight 60kg Color Black / Dark Gray Cell 3 Sealing Glue Sealing Separator AGM Flat Plate Plate Battery Case ABS Terminal Lead Safety Explosion-Proof Transport Package Carton, Then Pallet Specification CE/ FCC Trademark Pustun Origin China HS Code 8507200000 Production Capacity 2000 PCS/Day Product Description Maintenance Free Sealed Lead Acid Storage Battery, Deep Cycle AGM Type VRLA Battery for UPS, Solar Power System, Wind Renewable Energy, PV Application, Emergency Lighting, CCTV, Street Light, Fire & Security Alarm, Medical Equipment and so on.
We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly. Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
Lithium ion battery powder good quality Nickel 15% above, Cobalt 5% above, Lithium 3% above and Copper 7% above regular base .
BATTERY SCRAPS. Rain and Rinks available. Origin: Thailand. Please contact us for further discussions.
