Introduction: 1.Compatible with all 1996 and newer vehicles (obd ii & can) . 2.Supports multiple code requests: generic, manufacturer specific and pending codes. 3.Displays dtc definition on the tft color screen. Reading/erasing dtc and i/m readiness hot keys make it easy to use this tool right out of the package. Provides quick access to emissions readiness status. Dtc information and erase function. 4.Features the unique patented one-click readiness key for quick state emissions readiness check and drive cycle verification. 5.Bright color coded leds and built-in speaker indicate emissions monitor status. 6.Retrieves generic (p0, p2, p3, and u0), manufacturer specific (p1, p3, and u1) codes, and pending codes. 7.Displays monitor and i/m readiness status (emissions). 8.Easily determines the cause of the malfunction indicator light ( mil). Clear codes, turns off malfunction indicator light (mil) and reset monitors. 9.Reads freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, etc., at the time the malfunction indicator lamp (mil) was set 10.Reads live pcm datastream. 11.Retrieves vehicle information (vin, cid and cvn). 12.Displays live o2 sensor test data. 13.Enhanced obdii mode 6 functions. 14.Automatic vin acquisition and decoding makes it much easier to read manufacturer specific codes and enhanced mode 6 data. 15.Troubleshooter code tips guide technicians to the root cause of a trouble code faster, saving diagnosis and repair time. 16.Multi-language menu options and dtc definitions ¡§cenglish, spanish, french, german, portuguese and more. 17.Internet updateable and upgradeable let you stay current with the latest technology. 18.Prints data via pc
Features: Read dtcs. Clear dtcs. View live datastream. View freeze data. Reading i/m readiness status data. Restrieve vehicle information. Compatible with all 1996 and newer vehicles(obdii & can). Supported protocols: j1859-41.6, j1850-10.4, iso9141, kwp2000(iso 14230), and can(control area network iso 11898). Support multi language. One-year limited warranty.
Technical Specifications MTK 6580 Quad Core 1GB, 8GB EMMC 7 inch Capacitive Touch Screen Display 80mm built-in Thermal & Lablel Printer Dual SIM Cards, Support Micro TF Card Including NFC and IC card (optional) Charging Dock Stand Black, White and Red Colors Can be used as Standalone Cash Register Built-in 80mm Thermal and Label printer make it unique from others. Possess low power consumption.
Place of Origin: Jiangsu, China Brand Name: Good Partner Function: SDK Display: 12.5" Full HD1080P Display Printer: 58mm built-in Thermal Printer Touch Screen: Capacitive Touch Panel Memory: 2GB DDR3 Storage: 32GB EMMC Customer Display: 5"HD Customer Display Operating System: Android 7.1 CPU: RK3288 Quad Core Optional function: NFC card reader (optional) Camera: Built-in 2D Scanner
Thermal Sensing Terminal * Safe Pass-Floor stand type Key Feature * Quick & accurate fever detection * Face mask Detection * High accuracy on facial recognition * Alert / Notification function * Enhanced quality and design * No installation work required (Simply set it up on the floor) * 8 inch tablet used
1) Bar Code Scanners: Type : a) QS 1000 b) QS 250 c) Qs 6000+ d) Qs 2500
Compatible with(cyue-tech featured): Windows xp, vista, windows7 32-bit & 64-bit, osx operating systems. Pc with easy obd-ii, scanmaster elm, wobd crazy and so on. Handheld equipments (suggested android smart phones) with os, android, symbian, windows mb etc. Compatible protocols: ISO15765-4/SAE J2480 (can bus), ISO14230-4(kwp2000), ISO9141-2, J1850 VPW, j1850 pwm.
We have very famous brand barcode scanner to export all countries with factory waranty. Xl 626a , xl 6800......... Many models
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
mporter & Supplier of Nickel Sludge. Our product range also comprises of Copper Ore, Tin Ore, TIn Sludge, Cobalt etc. The raw materials are available in powder form, to the exact chemical and physical (Mesh Size) specifications of the welding electrodes industry. Nickel Sludge Product Code : Nickel Nickel Percentage : 15% to 20% Payment Terms : T/T (Bank Transfer), Western Union, Other Minimum Order Quantity : 25 Metric Ton Production Capacity : 100mt Delivery Time : immidiate Packaging Details : as per costumer requirement
We are engaged in wide range of Copper Ore Lumps. We are a renowned manufacturer and exporter of an impeccable Copper Ore Lumps, Known for their high efficiency and durability, these copper ore lumps are easily available in different dimensions, sizes and can be customized as per the demand of our esteemed clients. Copper Ore We are reckoned as one of the most outstanding Copper Ore Suppliers in the nation. We offer an inexplicable range of copper ore that are obtained from best Copper Ore Mines of the country. Additional Information: Item Code: KBT-MD-002 Minimum Order Quantity: 100 ton Port of Dispatch: Surat, Gujarat Production Capacity: 10000 Ton Delivery Time: 10 Day After confirmation Packaging Details: As per customer requirement. Specifications: Copper ore: 10 % to 62% Cu