1. Follow the specifications: ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Parameters:: 1). Size: 62 * 172 * 225 mm. 2). Weight: 2.0 kg. 3). High-contrast touch screen display. 4). Temperature range: Operating Range: 0° to 40° C; Storage Range: -20° to 65° C. 5). Powered by internal battery (6 hours duration). 3. Functional: 1). The LPT-E is used for Integrity pile testing and judging defect position 2). Automatic data storage 3). Signal amplification capability 4). Data can be averaged over a variable number of blows. 5). Variable signal amplification over time 6). 24-bit A/D converter 7). Sample size: 4k 8). Sample Frequency: 48kHz, 96 kHz,144 kHz
Application field 1. Pile integrity inspection; 2. Inspect concrete structure inner defects, concrete junction surface quality, surface damage layer thickness; 3. Concrete compression strength inspection; 4. Concrete crack depth inspection; 5. Rock, concrete wall and other non-metal materials wall of hole integrity inspection; 6. Rock, concrete and other non-metal materials mechanical strength test. Technical specifications ItemIndexItem Index Main control unitEmbedded ipcIndication unit640*480 tft lcd Operation modeKeyboard+opticalelectric knobStorage unit1g+1g u flash disk General interface Usb interfaceMax lifting speed60m/min(20cm measure) Channel numberDouble channelMax sampling length64k Trigger modeContinuous emission, outter triggerEmission voltage65, 125, 250, 500, 1000 available Receiving sensitivity 30uv Amplifier gain82db Amplifier band width 5hz-500khzSampling interval 0.05-6.4us, 8 steps optional Sound time accuracy0.05usAmplifier resolution0.39% Power supply modeHigh quality li battery for 6 hours continuous workSchmidt hammer outer connection Yes Polywood case, meet exporting packing requirements
Foundation Testing PIT Pile Integrity TesterThe dynamic testing instrument for foundation pile is a test and analysis instrument for testing the structural integrity of foundation pile and the vertical bearing capacity of single pile under impact or vibration load in the process of pile integrity testing and monitoring of prefabricated pile. The purpose is to determine the bearing capacity and structural integrity of pile.
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
Electronic component, parameter, test meters and safety parameter, test meters..
Goniophotometer, spectrophotometer, integrating sphere, photometer.
With the rise of new economic building materials, galvanized H-shaped steel is widely used, especially in steel structure buildings, supports, and bridges. In short, it is integrated with many aspects of daily life. H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc. Product : Galvanized H beam Standard : AISI, ASTM, BS, DIN, GB, JIS, etc Web Width : 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Perforated/galvanized/black Inspection : BV,SGS,MTC,etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
* Stainless H beam is widely used in beams and columns of industrial and civil steel structures. Steel structure load-bearing supports for industrial structures. Ship and machinery manufacturing frame structure. Steel piles and supporting structures of underground works. * H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. Product : Stainless H beam Standard : AISI, ASTM, BS, DIN, GB, JIS, etc Web Width: 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Sandblasting, solution pickling Inspection : BV,SGS,MTC,etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
* H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. * H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. * And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc. Product : Carbon Steel H beam Standard AISI, ASTM, BS, DIN, GB, JIS, etc Web Width: 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Pickling, Phosphating, Galvanizing Inspection : BV,SGS,MTC,etc. Warehouse : Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name: DX51D Galvanized Strip Place of Origin: China Type: Steel Strip Standard: AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.11-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: �±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing.
* Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name : Galvanized Strip Place of Origin : China Type : Steel Strip Standard : AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate : ISO9001 Grade : SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness : 0.11-5.0mm Surface structure : anti-finger print /skin pass/oiled/ dry/chromated Size : Customized according to customer needs Tolerance : 1% Processing Service : Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing : by actual weight Delivery Time : 7-15 days Technique : Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details : in bundles, in bulk, customized packing. Production process: The first stage: pickling and decontamination of the whole roll of strip steel to make the surface bright and clean. The second stage: after pickling, it is cleaned in ammonium chloride or zinc chloride aqueous solution or mixed ammonium chloride and zinc chloride aqueous solution tank, and then sent to the hot dip tank for galvanizing. The third stage: after the strip steel is galvanized, it is rolled up and put into storage. The galvanized layer can generally not be less than 500g/m2 according to the customer's needs, and any sample shall not be less than 480g/m2.
Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name: Galvanized Strip Place of Origin: China Type: Steel Strip Standard: AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.11-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: ±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing. Production process: The first stage: pickling and decontamination of the whole roll of strip steel to make the surface bright and clean. The second stage: after pickling, it is cleaned in ammonium chloride or zinc chloride aqueous solution or mixed ammonium chloride and zinc chloride aqueous solution tank, and then sent to the hot dip tank for galvanizing. The third stage: after the strip steel is galvanized, it is rolled up and put into storage. The galvanized layer can generally not be less than 500g/m2 according to the customer's needs, and any sample shall not be less than 480g/m2. Post treatment of galvanized strip steel includes passivation, pre phosphating and oiling. First of all, passivation treatment should be carried out on the galvanized strip steel, which can improve the surface structure and luster of the zinc coating, improve the corrosion resistance and service life of the zinc coating, and improve the adhesion between the coating and the base metal.
* Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. * DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. * Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name : DX51D Galvanized Strip Place of Origin : China Type : Steel Strip Standard : AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate : ISO9001 Grade : SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness : 0.11-5.0mm Surface structure : anti-finger print /skin pass/oiled/ dry/chromated Size : Customized according to customer needs Tolerance : + 1% Processing Service : Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing : by actual weight Delivery Time : 7-15 days Technique : Hot Rolled Based, Cold Rolled Port : Tianjin Qingdao or according to your requirement Packaging Details : in bundles, in bulk, customized packing.
Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name: Galvanized Strip Place of Origin: China Type: Steel Strip Standard: AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.11-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: �±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing. Production process: The first stage: pickling and decontamination of the whole roll of strip steel to make the surface bright and clean. The second stage: after pickling, it is cleaned in ammonium chloride or zinc chloride aqueous solution or mixed ammonium chloride and zinc chloride aqueous solution tank, and then sent to the hot dip tank for galvanizing. The third stage: after the strip steel is galvanized, it is rolled up and put into storage. The galvanized layer can generally not be less than 500g/m2 according to the customer's needs, and any sample shall not be less than 480g/m2.
* Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name : DX51D Galvanized Strip Place of Origin : China Type : Steel Strip Standard : AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate : ISO9001 Grade : SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness : 0.11-5.0mm Surface structure : anti-finger print /skin pass/oiled/ dry/chromated Size : Customized according to customer needs Tolerance : + 1% Processing Service : Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing : by actual weight Delivery Time : 7-15 days Technique : Hot Rolled Based, Cold Rolled Port : Tianjin Qingdao or according to your requirement Packaging Details : in bundles, in bulk, customized packing..
Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name: DX51D Galvanized Strip Place of Origin: China Type: Steel Strip Standard: AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.11-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: �±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing.
ASTM Tubes, SS Tubes, 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760), High Nickel Alloy Tubes, supplier. TYPE : SEAMLESS / ERW / EFW / WELDED / CDW RANGE : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness. FORM : ROUND, SQUARE, RECTANGULAR, COIL, \'U\' SHAP, PAN CAKE. LENGTH : SINGLE RANDOM, DOUBLE RANDOM & REQUIRED LENGTH ENDS : PLAIN END, BEVELLED END, TREADED OTHER : â?¢ HYDRAULIC TUBE â?¢ CAPILLARY TUBE â?¢ HORN TUBE â?¢ BOILER TUBE â?¢ IBR TUBE â?¢ PRECISION TUBE Stainless Steel Tube : Standard� : ASTM / ASME A/SA 269 / 213 / 249 Grade� : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Duplex & Super Duplex Steel Tube : Standard� : ASTM / ASME A/SA 240 / 790 / 815 / 928 Grade� : 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760) Aluminium Tubes : Standard� : ASTM B 241 Grade� : 2024, 6061, 6063, 6082 & 7075 Titanium Tubes : Standard� : ASTM B 338/ASME SB 338 /ASTM B 337/ASME SB 337 /ASTM B 861/ASTM B 862 Grade� : Gr1,Gr2,Gr3,Gr7,G9,Gr11, Gr12,Gr16,Gr17 Carbon Steel tubes : ASTM / SA 179 / A 210 GR.A / BS 3059 GR.360 & 440 Alloy Steel Tube : Standard� : ASTM / ASME A/SA 213 Grade� : T1, T5, T9, T11, T12, T22, T91 Copper Alloy Tube : â?¢ Copper Tube : Electrolytic / Dioxide â?¢ Copper Nickel Tube / Cupro Nickel Tube :ASTM / ASME SB 111 UNS NO. C 70600 ( CU -NI- 90/10) / C 71500 ( � � � CU -NI- 70/30) / C 71640 ( CU-NI-66/30/2/2) â?¢Admiralty Brass Tube : ASTM / ASME SB 111 UNS NO. C 44300 ( ALLOY 443) â?¢Aluminium Brass Tube : ASTM / ASME SB 111 UNS NO. C 68700 ( ALLOY 687) TEST CERTIFICATE : Mill Test Certificate as per EN 10204 / 3.1 Types Of Tubes â?¢ SS 310 / 310S SEAMLESS Tubes â?¢ Duplex Steel UNS S31803 Tubes â?¢ Stainless Steel 304 / 304L Tubes â?¢ Duplex Steel SEAMLESS Tubes â?¢ Stainless Steel 316 / 316L ERW Tubes â?¢ Duplex Steel UNS S32205 Tubes â?¢ Stailess Steel 321 / 321H Tubes â?¢ Super Duplex UNS S32750 Tubes â?¢ Monel 400 EFW Tubes â?¢ Hastelloy C276 ERW Tubes â?¢ SS Tubes â?¢ Steel Tubes â?¢ Inconel 625 WELDED Tubes â?¢ Alloy 20 EFW Tubes â?¢ Cu-Ni 70/30 (C71500) Tubes â?¢ Cu-Ni 90/10 (C70600) Tubes â?¢ ASTM A105 Tubes â?¢ ASTM A350 LF2 / LF3 Tubes â?¢ Inconel 600 SEAMLESS Tubes â?¢ Hastelloy B2 Tubes â?¢ SS 317 / 317L Tubes â?¢ Super Duplex WELDED Tubes â?¢ SS 347 ERW Tubes â?¢ Super Duplex UNS S32950 Tubes â?¢ Monel K500 Tubes â?¢ Hastelloy C22 SEAMLESS Tubes â?¢ Stainless Steel 446 Tubes â?¢ ANSI Tubes â?¢ Inconel 718 EFW Tubes â?¢ 904L Tubes â?¢ Incoloy 800 Tubes â?¢ Titanium Gr 2 Tubes â?¢ Incoloy 825 WELDED Tubes â?¢ Titanium Gr 5 Tubes RFP India is Indiaâ??s well-known manufacturer, supplier and exporter of Tubes, which are a long hollow cylinder used for moving fluids (liquids or gases) or to protect electrical or optical cables and wires. We also offer other forms of HYDRAULIC TUBE, CAPILLARY TUBE, HORN TUBE, BOILER TUBE, IBR TUBE, and PRECISION TUBE. There are three classes of manufactured tubing - seamless, as-welded or electric resistant welded (ERW), and drawn-over-mandrel (DOM). Seamless tubing is produced via extrusion or rotary piercing. Drawn-over-mandrel tubing is made from cold-drawn electrical-resistance-welded tube that is drawn through a die and over a mandrel to create such characteristics as dependable weld integrity, dimensional accuracy, and an excellent surface finish.
1. Follow the specifications: ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Parameters:: 1). Size: 62 * 172 * 225 mm. 2). Weight: 2.0 kg. 3). High-contrast touch screen display. 4). Temperature range: Operating Range: 0° to 40° C; Storage Range: -20° to 65° C. 5). Powered by internal battery (6 hours duration). 3. Functional: 1). The LPT-E is used for Integrity pile testing and judging defect position 2). Automatic data storage 3). Signal amplification capability 4). Data can be averaged over a variable number of blows. 5). Variable signal amplification over time 6). 24-bit A/D converter 7). Sample size: 4k 8). Sample Frequency: 48kHz, 96 kHz,144 kHz
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
Auto Tensile Tester Technical Indexes 1: Load range: 50N, 100N, 250N, 500N, 1000N, 2.5kN.(Personal customization available) 2: Accuracy: 0.03%FS max 3: Max travel distance: 1200mm. 4: Test speed: 0.01mm/min â?? 1000mm/min. 5: Displacement accuracy: 0.005mm. 6: Sample width: 55mm. (optional) 7: Sample thickness: 5mm. (optional) 8: Power supply: AC 220V 50Hz.(optional) 9: Power consumption: 300W.(Max) 10: Dimension 380mm(L) X 450mm(B) X 1309mm(H) 11: Net weight: 90kg.
