Specification : -> Thickness : 2mm - 15mm. -> Wide : 1000mm - 2000mm. -> Length : Up to 5800mm. (Because of transportation) Feature : -> A2, B1, B2 Composite Panel.. -> Honey Comb Composite Panel. -> A.R Composite Panel. -> PET Composite Panel. -> Stainless Steel Composite Panel. -> Curtain Wall Composite Panel. -> Copper Composite Panel. -> Titanium Zinc Composite Panel.
EPM A2, B1 & Non-FR. At EPM's purpose-built high speed production line using the most advanced technology in the industry and covering an area of more than 50,000 square meters, our multi-million dollar state-of-the-art facility has an annual capacity to produce in excess of 60 million square meters(600 Million Square Feet) of Aluminium Composite Panels using the very best raw materials from internationally renowned suppliers. EPM A2 ACP EPM's A2 Fire-Retardant ACP core consists of well-balanced combination of combustible (LDPE) and non-combustible (Mg (OH)2) in the core, will prove resistance to fire thereby delaying combustion, and declining further spread. Where an A2 SCP core should be 90% of non-combustible proportion with 10% balanced mix of LDPE and other supplements. EPM FR-B1 ACP EPM's FR-B1 is composed of a modified mineral-based core which consists of non-combustible mineral (Magnesium Hydroxide) and small quantity of low-density polyethylene with a composition of 73% of mineral plus 25% of LDPE and 2% of other additives sandwiched in two aluminum skins. EPM NON-FR ACP EPM's Non-Fire Retardant ACP core is made up of 100% LDPE, Low-density polyethylene (Linear or Recycled) which is a plastic based core, a petroleum by-product and of course 100% combustible and contribute to increase the intensity of fire propagation when they burn and changes a small fire to a big disaster. EPM ACP SPECIFICATIONS Panel Measurements Length 2440mm, 3200mm, 3600mm, up to 6000mm Panel Thickness 3mm, 4mm, 5mm, 6mm Aluminum Skin Thickness 5mm, 0.4mm, 0.3mm Weight 3mm=4.5kg/m2: 4mm=5.5kg/m2 6mm=7.3kg/m2 (Polyethylene Core) 3mm=5.8kg/m2: 4mm=7.6kg/m2 6mm=10kg/m2 (Modified Mineral Core)
ACP Easybold is a full thickness 3mm sheet with polyester paint. Lightweight, flexible, easy-to-handle material, often is used internal environment and on small facades, giving designs modernity and beauty. â?? ACP Engebold is a 4mm thick sheet with PVDF Kynar paint. Is a High-performance material to exterior coating, resistant and with U.V radiation protection, providing stability and color durability. Suitable for permanent works of architecture and construction.
Aluminum composite panel Panel Width: 1220 1250 1500 2030 Panel Length: up to 6000mm Standard Size: 1220Ã?2440mm,Customized Accepted Panel Thickness: 3mm,4mm,5mm,6mm,8mm 12mm Aluminum Thickness: 0.06mm to 0.70mm PE Core, Recycle PE Core,Fireproof PE Core Color: Customization Delivery Time: Within 14 days after receiving deposite MOQ: 800 SQM Payment Terms: T/T,L/C
Aluminum composite panel Panel Width: 1220 1250 1500 2030 Panel Length: up to 6000mm Standard Size: 1220Ã?2440mm,Customized Accepted Panel Thickness: 3mm,4mm,5mm,6mm,8mm 12mm Aluminum Thickness: 0.06mm to 0.70mm PE Core, Recycle PE Core,Fireproof PE Core Color: Customization Delivery Time: Within 14 days after receiving deposite MOQ: 800 SQM Payment Terms: T/T,L/C
Product information: Aluminum composite panel is made of aluminum alloy and plastic material to feature great hardness, light weight and smooth service, provided with wide range of sizes, shapes, colors, and styles to offer broader options for construction design, in a bid to better meet the requirements of contemporary construction on lightweight, elegant decoration and high hardness Aluminum composite panel is widely used in all kinds of architectural decorations for its excellent properties, such as the, cladding, shops front, ceiling, counters, furniture, road signs, billboards, kiosks, elevators, stores. Product range: Surface Coating Polyester Coating Aluminum Alloy AA1100, AA3003 Aluminum Skin 0.10mm,0.12mm,0.15mm,0.18mm,0.21mm,0.25mm,0.30mm Panel Thickness 2mm,3mm,4mm,5mm Core Material Non-toxic low density polyethylene Panel Width 1000mm,1220mm,1250mm,1500, Panel Length 2440mm,3050mm,4000mm,5000mm Back Coat PE coating, Primer Coating ,Mill finish Products tolerance: Panel Width ±2mm Panel Length ±3mm Panel Thickness ±0.2mm Panel Diagonal 5mm Aluminum layer thickness ±0.02mm
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
Product's name: Wood Charcoal Keywords: Flat cube charcoal,Flat cube burning,Lump charcoal , Lump Shisha Charcoal, Silver Charcoal. Specification as following: Specification: Grade A Material (Composition) 90% bamboo charcoal & 10% pure nature bonding Moisture Content less than 6% Fixed Carbon More than 85% Ash 4% Heat value 7000J-8000J Volatile Matter 2% Hardness 90% Temperature (Burning) 700-880°C Burning Time 4-5 hours Others feature smokeless,odourless,innocuity, no bursting it is an environment-friendly products , no any chemicals Size: hexagon shape square diameter outer diameter Æ 40mm 40x40mm inner diameter Æ 10mm Æ 10mm Length 18-25cm 18-25cm Weight (Average) 285g-295/pc 285-295g/pc
4mm thick Aluminium composite panels pvdf finish
ACP/FR is more and more popular now which is premium fireproof cladding material and mainly used in high-rising building. ACP/FR will replace the normal ACP with LDPE core in the future.We are the supplier of aluminum composite panels in China. 1:Model NO. WS FR 2:Thickness: (1)Panel Thickness: 4mm (2)Aluminum Thickness:0.5mm 3: Width: 1220,1250, 1500mm 4:Surface Finishing: Smooth Attractive Color,etc 5:Transport Package:Bulk Packing or Wooden Pallets 6:Specification:1220x2440mm 7:Maximum Length:5800mm 8:Fr Class: A;B1 9:Certification:CE, ASTM, ISO, ASTM/NZS 10:port: Huangpu,China 11:Payment Terms:L/C, T/T, D/P
Aluminum flat rolled products, Building sheets Closure stock, Fin stock, Hot rolled plates, Pattern sheets, Cable wrap stock, Cold rolled coils, Flooring sheets/tread plates, Lamp cap stock, PCB entry sheets/coils, Circles, Cold rolled sheets, Foil stock, Litho stock, Spiral fin stock .
Product Specifications Thickness: 3mm, 4mm (1mm,1.5mm, 2mm, 5mm is also available) Width: 1,220mm - 1,600mm Length: 2,440mm (or customized) Thickness of Aluminum: Aluminum Thickness 0.12/0.12mm for Board Thickness 3mm (Or Customized from 0.05/0.05mm-0.21/0.21mm) Aluminum Thickness 0.40/0.40 for Board Thickness 4mm (Or Customized from 0.08/0.08mm- 0.50/0.50mm) Coating: PE Coating for Board Thickness 3mm (Or Customized) PVDF Coating for Board Thickness 4mm Nano coating is availabe Length: 2440mm (can be customized)
HLCALUMINIUM aluminium composite panels manufacturers produce many kinds of aluminium building materials with customized service. We manufacture aluminium composite panels (including PVDF coating, PE coating, PE core, unbroken core, Fireproof A2 and B1 ACP) fluorocarbon aluminum panel, aluminum honeycomb panel, aluminum ceiling, three-dimensional aluminum core aircraft plate and other aluminum products.
Indo bond aluminium composite panel Most modern and latesh lines as per international standards Sea worthy
Size:1220*2440*3mm Aluminium Alloy Thickness:0.18mm Color:As Customers' Request Surface Treatment:Anodized, Brushed, Foil Decoration, Mirror, PE Coated, PVDF Coated Function:Anti-Static, Antibacterial, Fireproof, Mould-Proof Application:Sighboard,Outer-wall,Curtain Wall,Balcony,Industrial Usage Packaging:Bulk or Wooden Box
ACM thickness:2mm, 3mm, 4mm, 5mm, 6mm. Aluminum thickness:12mm, 0.15mm, 0.18mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm. Panel size:1220mm*2440mm (regular),1250mm*2440mm,1500mm* 5000mm. Package:suitable for the container Payment:30% prepayment by T/T before production, 70% balance by T/T before shipment, or 100% irrevocable L/C at sight. Delivery time:10-15 days from the date that we get your prepayment.
Aluminum composite panel Specifications: 1) standard size: Thickness (t) : 1 mm, 2 mm, 3 mm, 4mm, 5mm Width (w) : 1220 mm£¬1250mm Length (l) : no limitation 2) aluminum thickness: 0.3/0.4/0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 6) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. 7) core: fire-resistant polyethylene or normal polyethylene(pe) 8) standard specifications can be altered to meet customer¡¯s specific requirements Please contact me if you are interested in our products, please contact me
Aluminum plastic composite panel Specifications: 1) standard size: 1220*2440 2) aluminum thickness: 0.026----0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 5) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customers samples available. 6) core: fire-resistant polyethylene or normal polyethylene(pe) 7) standard specifications can be altered to meet customers specific requirements
Aluminum composite panel We are an aluminum composite panel (acp) manufacturer located in shanghai city (the most vigorous economic region in china). We have 7 products lines with a anuual capacity of 10, 000, 000.00 square meters. The acp thickness we can supply 1 to 6mm and the width is less then 1600mm. We have advantage on 0.03 to 0.5mm for aluminum thickness. Coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. For more detailed information about our company, please visit our website. If there is anything you are interested in, please feel free to contact me.
Sustainable Development Of Aluminum Composite Panel Industry In order to the healthy and sustainable development of the Aluminum Composite Panel industry, we must take the comprehensive, coordinated and sustainable scientific development concept as the guidance and do a solid job in the following aspects. 1. Efforts must be made to improve product quality: product quality is the life of an enterprise and the foundation of industry development. We must change our tendency to emphasize quantity over quality and concentrate on product quality. 2. Aluminum production and integrating market demand: the main purpose of the aluminum-plastic plate is used as a building curtain wall and wall decoration, so the development of aluminum-plastic plate for construction, the demand of the architectural decoration industry as the leading direction, will closely combine with construction, building decoration industry, to the road of common development and common prosperity. 3. Give full play to the role of the association: the association should establish the scientific development concept, enhance the service function, promote the sustainable, rapid, coordinated and healthy development concept of the aluminum plastic plate from Aluminum Composite Panel Manufacturer, give full play to the association's function of bridge, coordination, service and self-discipline, and create a good environment for the development of the aluminum plastic plate industry. 4. Actively carry out technological innovation activities to promote the technical progress of the aluminum and plastic board industry: technology is the basis for the development of the aluminum and plastic board industry. Only continuous innovation and progress in technology can make the aluminum and plastic board industry last for a long time. Aluminous model board regards a kind of new-style adornment as decorating material, regard a kind of organic inorganic compound as material, although have a lot of outstanding performance, but still need to develop ceaselessly and progress, because the market and demand are not invariable, the technology is in ceaseless progress.