Easy To Apply
Single Pack
Superior Durability
Excellent Gloss Retention
SCOPE
USES
Kisomin Aluminium Paint is a modified Synthetic Resin based enamel.
It provides high Light fastner and brightness with excellent orientation
finish. it has good adhesion on interior or Exterior surfaces.
Recommended as a decorative finish coat & can be applied on
surfaces like Grill, Windows, Cabinets & wide range Metal Structures.
VISCOSITY FOR APPLICATION
* For Brushing 40"-45" at 30C
* For Spraying 18" 20" at 30C
* For Roller 55"-60" at 30C
SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of
Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Stir the base thoroughly and then mix to uniform consistency.
Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4
Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm.
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information
Automatic series for customized Spider hand delta robot for Parallel robot-3c industry,
Parallel robot - food industry,
Parallel robot - medicine industry,
Parallel robot - Daily Chemical Industry,
Other standard automation systems : Automatic bagging, automatic sorting, automatic packing, automatic palletizing, automatic palletizing and automatic loading ... any want to automaitc same this kind ,offer training after-sale service ! whole life maintenance!
