Acrylic Road Marking Paint Suppliers and Manufacturers

Product formation: Be composed by acrylic resin, special resin, pigment, filler and organic solvent. It is the ambient temperature self dry solvent type coating , product features:, film hard and durable, high compressive strength, good adhesion, excellent wear resistance, weather resistance. technical data:, color and appearance of paint film colors and smooth film, viscosity (stormer viscometer), ku 80-100, dry film thickness, um 60-70, drying time (25, ), h surface dry1h, hard dry12h, fully cured 7d, adhesion (zoned method), class 2, impact strength, kg, cm 50, bending strength, mm 5, wear resistance, mg, 1000g/200r 50, flexibility, mm 2, water resistance 72days, , using:, widely used in the road, traffic crossing, workshop, warehouse, stadium and other places to set the line, , packing:, paint:20 kg/bucket.

Features: 1. Fast dry 2. Anti-yellowing 3. Abrasion resistance Application site: Road, factory, stadium etc.

Theaoson graffiti spray paint is composed of aerosol tank, aerosol valve, paint liquid and spray agent. This product is one component acrylic paint, made of acrylic resin, imported sunproof pigment, additives and solvent. With special valve and special nozzle, it is more convenient to paint various colors and different lines easily. Features High solid content Good covering power Rapid drying Good weather resistance Rich color Application It is suitable for all kinds of metal, ceramic, wood, glass and other materials graffiti painting. If it needs to be used for plastic material, it can be used in a small area first, and then be used in a large area after no adverse reaction. Usage Clean up dirt, oil and water stains on the surface of the sprayed object before using. A small area trial spray is carried out before spraying, and construction is carried out after no adverse reactions; From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; Shake the product up and down for about 1 minute, so that the material liquid is fully mixed and uniform, spray at a distance of about 15~20cm from the sprayed surface at a uniform speed, completely cover about 2~3 times, according to the required covering effect can decide the number of spraying times, spraying for multiple times, each time interval of 1 minute; If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.

Road Marking Paint

Road Marking Reflexive Paint (yellow, Black)

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,

The waterbone road marking paint is made of water as the dispersion medium, emulsified polyacrylic resin as the binder, and processed with the corresponding pigments, fillers and additives. During the construction process, the VOC emission is very small. A green product that can achieve clean production.

Fluorescent road marking paint is a kind of coating that emits fluorescence. It is made up of acrylic resin and fluorescent materials and other additives. It can absorb light under the illumination of the light source and convert it into another light of its own color. Therefore, it looks very bright and bright, and it can be painted with various signs to play the role of nighttime indication.

Road Marking Reflexive White Paint

Crude oil, cement, charcoal, flour, palm kernel oil, palm kernel seed, river sand, white beans, bitumen, turkey, parboiled rice, used car, motor oil, diesel.

Product: thermoplastic road marking paint Used for: asphalt and concrete Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦ Appearance: powder Color: white/yellow (or other colors according to buyer's requirement) Coating thickness: 1.6mm-2.0mm Abrasion resistance: 56.8 Glass beads: 0%/10%/20%/25%/30% Softening temperature: 90-104â°c Heating temperature180-220â°c Drying time after marking touch dryâ??3 mins full dryâ??10 mins Shelf life 1 year Storage: store in a tightly sealed container in a cool & dry place Area of line: 1 ton thermoplastic paint can mark about 200 m2

Luminous road marking paint.

Road Barrier ( roto Molding Process). Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding.

Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.

We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.

We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.

We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.