Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
We are very well producer of rubber roll sheet in Korea for satisfying the requirements below conditions Thickness:10~80mm Width: Min 910~ Max1,500mm Length: 10~30m Color: as your request excepting white Material: Natural rubber, SBR, EPDM as your request
We produce a high quality rubber product made from natural and synthetic rubber materials and our factory has been certified for ISO 9001:2015. Our products comply with well known International Standard as American and Standard quality which has been tested by Our rubber sheet available with - Thickness Start: from ONE (1) MM - Maximum Wide: from TWO (2) Meter - THREE point ONE (3.1) Meter. - Material: Natural Rubber, SBR, EPDM, Neoprene, NBR. Our product range as follows: - Rubber Sheet. - Rubber for industrial products (Gasket, Lining, Rail Pad, Roller, etc). - Rubber Flooring. - Rubber Gym Mat, Sports courts and playground/park. - Rubber for public transportation and public facility (Fender, Anti-fatique, etc).
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Coir fibre bale, coir pith, coco peat, grow bags, coco chips, coir needle felt, coir geo textiles, rubberized coir(latex sprayed) sheets for mattress ,mulch mats and garden articles.
Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications. Advantages of Flexible Magnet: Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes. Technical Data of Flexible Magnet: Shapes: Rolls or Sheeting & Strips Magnetization: Axially Magnetized Br: 1,600 Gauss BHmax:0.60 MGOe Hc: 1,370 Oersted's Max Operating Temperature:212F/100 Density(lb/in3): 0.133
We are engaged in wide range of Copper Ore Lumps. We are a renowned manufacturer and exporter of an impeccable Copper Ore Lumps, Known for their high efficiency and durability, these copper ore lumps are easily available in different dimensions, sizes and can be customized as per the demand of our esteemed clients. Copper Ore We are reckoned as one of the most outstanding Copper Ore Suppliers in the nation. We offer an inexplicable range of copper ore that are obtained from best Copper Ore Mines of the country. Additional Information: Item Code: KBT-MD-002 Minimum Order Quantity: 100 ton Port of Dispatch: Surat, Gujarat Production Capacity: 10000 Ton Delivery Time: 10 Day After confirmation Packaging Details: As per customer requirement. Specifications: Copper ore: 10 % to 62% Cu
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars
butyl tapes are waterproof and insulated tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Butyl Tapes Are Waterproof And Insulated Tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation - 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility Â40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. pplications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
