TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone, etc .
Tci cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone, etc .
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone
Product Description: 215.9mm IADC137 Industrial standard:SY/T5164 Payment terms: T/T,Western Union,and L/C are acceptable Applications:Medium hard with high compressive strength and high abrasiveness, such as limestone, dolomite, sandstone and chert, etc. Note:other size and IADC is available
Product Description: 215.9mm IADC137 Industrial standard:SY/T5164 Payment terms: T/T,Western Union,and L/C are acceptable Applications:Medium hard with high compressive strength and high abrasiveness, such as limestone, dolomite, sandstone and chert, etc. Note:other size and IADC is available For more info: www.crossingbit.com Hebei Crossing Drill Bit Manufacture CO.,LTD
1. The water circulation, elastomer&mental-face sealed roller bearing tricone bit . 2. Sy/t5217-2000 and api spec7-1 standard; 3. Gauge protection extend period of using life ons for water well and oilfield 7. The size range from 3 7/8 to 22. Wooden box
Bit size Inch (in) 5 7/8 6 61/8 6 1/4 7 7/8 8 3/8 8 1/2 8 3/4 9 1/2 9 5/8 9 3/4 9 7/8 12 1/4 13 3/4 Metric (mm) 149.2 152.4 155.6 158.7 200.0 212.7 215.9 222.2 241.3 244.5 247.3 250.8 311.1 349.2 Bit type 437 437 437 437 447 417 417 417 417 417 417 417 417 417 517 517 517 517 517 437 437 437 437 437 437 437 437 437 537 537 537 517 517 517 517 517 517 517 517 517 617 617 547 537 537 537 537 537 537 537 537 637 637 617 617 617 617 637 637 637 API Regular Pin (in) 3 1/2 4 1/2 6 5/8 Recommended make-up torque for bit shank (KN.m) 9.50-12.2 16.30-21.70 37.93-43.30. Carton or box.
Our tricone bits can be devided into two series: steel tooth tricone bit (mill tooth tricone bit) and TCI tricone bit (tungsten carbide tricone bit), both of which are used for mining, piling, water well drilling and oil well drilling. Our tri-cone bits are of American style and we process our products strictly according to API standard and ISO9001-2001 quality controlling certificate, that can ensure you of our offering good quality products. Product Specification/Models: various sizes and styles Steel tooth tricone bit: IADC 127, 126, 117, 216, 125, 215, 311 TCI tricone bit: IADC 517, 527, 537, 547, 617, 515, 525 Application: for water well drilling, oil well drilling, mining, piling. Packed by case.
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price. We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price. Product Description: Steel teeth Bits 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.) 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability. Plywood case or according to the conform order.
Tricone Bits are designed for multiple drilling applications, such as Gas and Oil production, Mining and Mineral Exploration, Water Well production, and various other industrial uses. Tricone bits we supplied are made from high quality materials (steel forging, carbide, and others) as per API spec 7 or ISO9001 system, including S series elastomer sealed journal bearing bit, S series non-sealed journal bearing bit, SV series six-point position stabilization motor bit, SL series pilot hole-reaming core bit, SD series single cone bit, etc. Please provide IADC code when asking for quotation.
TRICONE BITS : tricone drill bit is used when working with soft rock formations. Tricone drill bits that are ideal for soft rock formations will have long protruding teeth. They are also used to drill medium rock formations which include dolomites, hard limestone, and calcites. Core Bits APPLICATIONS:- ->Glass ->Ceramics ->Tile ->Rock and stone ->Granite and marble ->Concrete ->Masonry products ->Hard metals
1.Tighten the bits when screw on. 2.When the bit lower down to the bottom , Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling. 3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay. 4.When drill jammed, withdraw first, should not to force the rig start. 5.Drill could not without water, to ensure that the bit will be too hot. 6.Use the bits in right order , big size first, then small one . 30*40*45 cm 50kg
1.Tighten the bits when screw on. 2.When the bit lower down to the bottom , Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling. 3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay. 4.When drill jammed, withdraw first, should not to force the rig start. 5.Drill could not without water, to ensure that the bit will be too hot. 6.Use the bits in right order , big size first, then small one . 30*35*40cm 45kg
The used tricone bits are much more cheaper than the new ones because of the cost is low, but the quality is promised. 30*35*40cm 45kg
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price. We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price. Product Description: Steel teeth Bits 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.) 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability. Plywood case or according to the conform order.
product name: tricone bit, tricone rock bit, rock roller bit, roller cone rock bit, etc diameter: 171/2" IADC:737 connection thread: 75/8" API Reg pin bearing: sealed bearing usage: water, oil, gas well drilling, foundation bore pile drilling application formation: hard rock formation Company profile Hebei Crossing Drill Bit Manufacture CO.,LTD is a professional supplier of drilling tools,including tricone bit,PDC tricone bit,Hole opener,single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field,profile optimization,design of inserts arrangement and low torque,material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas,mining,geothermal,construction and so on. The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the United States, England,Canada,Brazil,Russia,Italy,Iran,Saudi Arabia,Korea, India, and Poland and so on. The main products we can provide: 1.tricone bit(steel tooth and tungsten carbide insert tooth bit) 2.PDC bit(steel body and matrix body PDC bit) 3.rock hole opener for vertical and horizontal directional drilling, rock reamer 4.other drilling tools(single tricone cutter, mud motor, drill rod, drag bit, etc)
1.Cutting structure this type TCI tricone bits: The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit. 2.Gauge structure this type TCI tricone bits: Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3.Bearing structure of this type TCI tricone bits: High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved. 4.Seal and Lubrication of this type TCI tricone bits: Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability . 5.Product Application this type TCI tricone bits: It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
Tricone Bit Breaker Product Description 1. Bit Breakers The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit. Feature:Improve support and retention Advantage:Manage the magnitude cutter loading and bit torque Benefit:Improved bit durability and directional responsiveness Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure. 2. Detailed introduction to Bit breaker 1>Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string. 2>It can also prevent the rock bit from dropping into well hole. 3>The price of it is cheap and the use of it is safety and reliable. 4>It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
Name: 6¡¯ tricone bit : Type :6sy, Iadc :417&517&527&537&617&637 Weight:17kg Weight:17kg
