Weight: 300g/sqm Thickness: 0.167mm Density: 1.8g/cm³ Direction: unidirectional Packing: 100 meters/roll Width: 100mm, 200mm, 300mm, 500mm or to be customized. Flexible High strength High modulus Easy to install Long shelf life Light self weight High toughness Anti high temperature Environmental-friendly Carbon fiber fabric used for shear strengthening, confinement strengthening, flexural strengthening
Carbon fiber unidirectional fabric is a type of reinforcement material used in composite manufacturing. Unlike traditional woven fabrics, which consist of fibers running in two directions (warp and weft), unidirectional carbon fiber fabric has all its fibers aligned in a single direction. This alignment provides specific advantages in terms of strength, stiffness, and weight distribution.
Unidirectional carbon fiber fabric is a type of composite material that consists of carbon fibers arranged in a single direction within a matrix material, typically epoxy resin. The carbon fibers in unidirectional fabric are aligned parallel to each other, which gives the material its name, "unidirectional." Directional Strength: Unidirectional carbon fiber fabric exhibits exceptional strength in the direction of the fibers. This characteristic is particularly advantageous when a component or structure primarily experiences loads along a specific axis. Lightweight: Carbon fibers are renowned for their low density, contributing to the lightweight nature of unidirectional fabric. This attribute is crucial in applications where weight reduction is critical. High Stiffness: Carbon fibers have a high modulus of elasticity, resulting in a stiff material. This stiffness minimizes deflection under load, which is important in applications where structural rigidity is paramount. Tailorability: Unidirectional carbon fiber fabric can be customized to meet specific requirements. Engineers can adjust the fiber orientation, the type of matrix material (commonly epoxy resin), and the number of plies to tailor the mechanical properties for different applications. Corrosion Resistance: Carbon fibers are inherently corrosion-resistant, making unidirectional fabric suitable for use in harsh environments, where protection against environmental factors is essential. Fatigue Resistance: These materials are highly resistant to fatigue, ensuring a long service life even under cyclic loading conditions. Thermal Conductivity: Carbon fibers have relatively low thermal conductivity, which can be advantageous in applications where thermal insulation or minimal heat transfer is required. Balanced Anisotropy: Unidirectional fabric offers anisotropic properties, meaning its mechanical characteristics vary with orientation. Engineers can harness this anisotropy by combining multiple layers or orientations of fabric to achieve balanced mechanical properties in different directions. High Cost: Unidirectional carbon fiber fabric can be expensive due to the cost of carbon fibers and the manufacturing process. However, the high performance and durability of the material can often justify the cost in applications where its unique properties are essential. Structural Strengthening: Unidirectional carbon fiber composites can be used to reinforce and strengthen existing building structures, such as bridges, beams, columns, and slabs. This technique can help extend the service life of older buildings or structures that require additional load-bearing capacity. Seismic Retrofitting: In regions prone to seismic activity, unidirectional carbon fiber composites can be applied to enhance the seismic resistance of buildings by improving their structural integrity. This retrofitting helps reduce the risk of damage during earthquakes.
Weight: 200g/sqm Thickness: 0.111mm Density: 1.8g/cm Direction: unidirectional Packing: 100 meters/roll Width: 100mm, 200mm, 300mm, 500mm or to be customized.
1. Calcium Chloride powder 74% cacl2 92% cacl2 94% 2. Magnesium Chloride flake 3. Sodium Meta Bisulphite (food grade 94 96%) 4. Silica Quartz ore purity: 98% available, silica quartz powder/purity: 99.9% available, silica lumps purity: 99% available 5. Garbage Bags: disposable plastic hand glove, garbage bags on roll, oxo-biodegradable bag, bio hazard bags, compostable bags, grocery bags , shopping bags, shopping bags (loop handle), bakery and snacks bag, industrial liner bag, self adhesive bags, bouffant cap, aluminum foil, vegetable bag on rolls, pp printed bags, biodegradable bag, ld & hm industrial liner bags, pp self adhesive tape bags 22 bopp bags 23 laminated pouch 6. Red Onion as per your required size. 7. Antigen kit: a) who certified kit b) ce certified kit 8. carbon black 9. sodium acetate anhydrous 99% sodium acetate trihydrate crystal 99%10.pet preform & fiber, bottle, flakes, 11. capsicum or bell pepper, ready to eat foods, ready green paste like ginger, garlic 12. Pe.We also do logistic work for cif and we have 3rd party facilities like sgs on client chargeable base.
Grade: 1. Carbon Black PL330J 2. Carbon Black PL330C 3. Carbon Black PL330C 4. Carbon Black PL550C 5. Carbon Black PL550B 6. Carbon Black PL550C 7. PL660B Beads 8. Carbon Black P330 9. Carbon Black P550 10. PL772B Beads Purity: 1.OAN (ml/100 gm) >90 2.OAN (ml/100 gm) >90 3.OAN (ml/100 gm) >95 4.OAN (ml/100 gm) >100 5.OAN (ml/100 gm) >100 6.OAN (ml/100 gm) >100 7.DBP No (OAN) (cc/100 gm) >100 8.DBP No (OAN) (cc/100 gm) >100 9.DBP No (OAN) (cc/100 gm) >105 10.DBP No (OAN) (cc/100 gm) >90 Actual price will be provided after your enquire.
Can supply: Mix White-ecru Fabric Cuttings (clips) And Mix Quality (cotton, Cotto/lycra etc.) BALES WASTE. Materials are suitable for the production of felt - shoddy (for disintegration into fibers). Post industrial. Can load in 1x40HC container aprox. 25-27 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Can supply: New Fabric Cuttings (hosiery Clips) Mix Colors And Mix Quality (cotton, Cotto/lycra Etc.) Bales Waste. Materials are suitable for the production of felt - shoddy (for disintegration into fibers) and other apllications. Post industrial. Can load in 1x40HC container aprox. 25-27 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Product Information: The warp direction is all made of 12K carbon fiber filaments, and the weft direction is woven with hot-melt wires. The strength of the cloth is concentrated in one direction. It is mainly used for repairing and sealing cracks in buildings, increasing load and reinforcement, and resisting acid and alkali corrosion. For example: Concrete beams are flexurally strengthened, seismically strengthened. Reinforcement of civil buildings such as buildings, schools, hospitals, factories and other industries. Dams, roads, bridges and other infrastructure reinforcement. Reinforcement and anti-corrosion of large chimneys, mines, etc., lining of pipes, etc. Product Specifications 12K-UD200: 1Level, 200g/m2, 0.111mm Thickness, 100-3200mm Width; 12K-UD200: 2Level, 200g/m2, 0.111mm Thickness, 100-3200mm Width; 12K-UD300: 1Level, 300g/m2, 0.167mm Thickness, 100-3200mm Width; 12K-UD300: 2Level, 300g/m2, 0.167mm Thickness, 100-3200mm Width; Product Features 1. Soft texture, can be effectively pasted on uneven surfaces, suitable for various shapes and structures. 2. There is no need for large-scale construction equipment and on-site fixed facilities. The product can be cut at will, and the construction is simple and the cycle is short. 3. It is resistant to acid and alkali corrosion and can be used in various harsh environments. 4. Light weight, thin cloth surface, does not affect the appearance and shape of the structure. 5. Excellent physical properties, the tensile strength far exceeds that of ordinary steel. 6. Environmentally friendly and pollution-free. Applications It is mainly used for repairing and sealing cracks in buildings, increasing load and reinforcement, and resisting acid and alkali corrosion. Packaging Information Carton and Tray
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
We deals in the following Chemicals :- Calcium Carbonate Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Export of coconut based products 1. granular coconut shell charcoal mesh size 2 * 8, 3 * 6 , 4 * 8 , 8 * 20 2. granular activated carbon for water purification and gold mining 4 * 8 / 8 * 16 / 6 * 12 / 8 * 30 / 12 * 40 / 30 * 60 3. coconut coir products, cocopeat block, coco husk chip blocks, grow bags 4. coconut keel 5. coconut expeller cake 6. coconut shell peices , coconut shell handicrafts.Exporter
Commodity: Sodium bicarbonate Synonym: Baking Soda; Bicarbonate of soda; Sodium acid carbonate; Monosodium carbonate; Sodium hydrogen International CHEMTREC , carbonate; Carbonic acid monosodium salt Molecular formula:NaHCO3 Molecule Weight:84.01 H.S code:28363000 CAS:144-55-8 Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air. Quality Standard Item The National Standard The Total Alkalinity Content(NaHCO3)% 99.0, 100.5 Loss on Dring% 0.20 PH Value(10g/1) Solution, 8.6 Arsentic Content% 0.0001 Heavy Metal Content, 0.0005 Ammonium Salt pass Clearness pass Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc. Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag. (We can meet with all your demands according with your need.)
SO KLIN PRO is brilliantly formulated to CLEAN & CARE in removing tough & stubborn stains and yet protecting colours and preserving fabric fibers. It protects real colour from fading even after frequent washes. Available Packaging: 10 gr, 120 gr, 340 gr, 900 gr, 1800 gr. Product of Wings Indonesia Shipping from Semarang, Indonesia
SO KLIN Softergent comes with 3 soothing smells : Soft Floral Fragrance (Pink), Fresh Floral Fruity Fragrance (Blue), and Lavender (Purple) to fit your senses. It has dual functions which are to clean your clothes effectively and softening clothes fabric at the same. Now your clothes are irresistably clean and soft with one detergent. SO KLIN Softergent is so convenient and economical. Available in 3 variants : So Klin Softergent Pink - Soft Floral Fragrance So Klin Softergent Blue - Fresh Floral Fruity Fragrance So Klin Softergent Purple - Lavender Fragrance Now introducing brand new So Klin Softergent Lavender. New variant of Soklin Softergent, is giving pleasant & sensory smoothing Lavender smell to your clothing. So Klin Softergent Lavender is the perfect combination of detergent and softening agent that effectively removing stains to the fiber cloth & soften clothes at the same time with extra softener particles (twice as much). Clothes becoming aromatic, smoother and easier for ironing. Besides, now Soklin Softergent Lavender equipped with FRESH PROTECTION technology that is able to protect clothes from musty smell even when indoor drying or without direct sun light. Soklin Softergent available in different sizes, which are 10gr, 120gr, 340gr, 600gr, 900gr and 1800gr. Product of Wings Indonesia
We deals in the following Chemicals :- Calcium Carbonate Powder Alumina Silica ( Cenosphere ) Powder Fly Ash Powder Ilmenite (Synthetic Rutile) Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Barite Powder, Barite Ore Dolomite Powder Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance. 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric; 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
Making wadding and padding materials 7D*64mm HC non silicon polyester staple fiber white color 054310599 Our siliconized fiber mainly can be used in home textile, such as filling sofa, pillow, cushion and winter clothing and non siliconized mainly can be used in non woven fabrics, such as padding, mattress and wadding.
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
Specifications Material: 100% natural coir fiber from coconut husks, woven into a durable fabric. Shape: Triangle/ Square/ Rectangle Diameter hole: 1-1.5 cm Size: Commonly 3x3 to 6x6 meters; custom sizes available.
