ARSPL UPVC ROOF SHEET
1) Heat insulation up to 40%. Excellent Thermal Insulation: Thermal
Conductivity 0.104 W/m* C
2) Excellent sound insulating properties
3) Resistance to acids, alkalis, salts and solvents, corrosion
4) Resistance to the extreme weather conditions: snow, hail, high
wind â??pressure
5) High Strength Characteristic: Tensile Strength 29~31 MPa, Flexural
` strength 45~55MPa, Impact Resistance 50~60kJ/m2
6) Temperature usage Range: from -40 C to +75 C. Material
`withstands over 100 cycles of freezing and thawing
7) Color Fastness: Pigments used are 8 points on the BW Scale
8) Light Weight: 3.6Kg/m2
9) Resistance to the influence of ultraviolet rays. Highly UV protected.
10) Non-combustible nature of the material. Class B1 Retardant Building
Materials. Fire Retardant.
11) Easiness of installation: material can be easily cut, drilled, and sawn
12) Absolute waterproof properties
13) Flexibility: material allows roofing of hanger-type structures and
spherical fencing
14) Economical Installation: overlapping waste doesnâ??t exceed
8%. High utilization efficiency up to 95%
15) Availability of the same profile transparent sheets for the creation of sky--
lights.
16) Wide Variety of available colors. Good aesthetic appeal.
17) Cost-effective in installation and saves construction costs up to 70%.
18) Eco-friendly & Energy Efficient Green product.
19) Non-Carcinogenic
20) Increases labor productivity and machinery efficiency
21) Non-conductor of electricity.
22) Long life
23) Compulsory for some industries like chemical, pharma, fertilizer,
leather, process, etc.
Blue face masks flat Non Woven Thick 3-Layers disposable Breathable Facial Masks with EarloopÂ
3-i: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch.
Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen.
Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being.
Upgraded Nose Clip & Ear Loop-- The Extra-soft elastic ear loops could eliminate pressure to the ears for maximum comfort. It can be used with earloop holders for additional comfort
� Widely Applicapable Indoor&Outdoor Facial Masks for Daily Uses-- Our personal protective masks are worn all over the world in most common workplace environments. They are suitable for public transportation, shopping, school, and other public settings.
3-Layered Protection-- The disposable face mask is made of Premium Melt-Blown Cloth; the outer layers is a high-quality non-woven fabric and the center layer is a filtration non-woven fabric.
Size of 9 square wave polycarbonate roofing sheets
Width: 1070mm
Thickness: 0.65mm - 1.5mm
Common length: 6m
Especially, providing the length according to the individual requirements of each customer
Size of 11 square wave polycarbonate roofing sheets
Width: 1070mm
Thickness: 0.65mm - 1.5mm
Common length: 6m
Especially, providing the length according to the individual requirements of each customer
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
4.Excellent Anti-corrosive And Excellent Weather Resistance.
PVC roof tile can long resist acid, alkali, salt and other corrosive chemicals. It suitable for using in corrosive workshop, acid rain-prone area and coastal area.
5.Good Fire Resistance With Excellent Insulation And Excellent Waterproof Performance.
Belonging flame retardant material, with fire resistance tested by national authoritative departments. The roofing sheet selects highly weather-resistant resin, which is dense and
absorbing no water, with no pore penetration problem.
We are supplier and exporter of Calcined China Clay.
We are offering an extensive range of high-quality Calcined China Clay that is used for paints, rubber and soap industries. Features: Chemically inert Correctly formulated Enhanced shelf life Specifications: Type: Powder Colour: White Packaging - As per Client Applications- Paints, Rubber and Soap industries.
China Clay is a clay mineral with the chemical composition AlSiO3O5(OH)3. It is layered silicate mineral. It is soft earthy, usually white in color, produced by the chemical weathering of Aluminium Silicate mineral like Feldspar. Commercial grades of China Clay are supplied and transported as dry powder form, semi dry noodle form or as slurry.
Origin: United States
Code: 2025211LD
Material:PMMA Sheet Cuts out & Parts Clear and Coloured
Category: PMMA
Type: Cuts out & Parts
Color: Clear and Coloured
Quantity: 15 Tons
Loading weight: 15 Tons
Specification:"PMMA Sheet Cuts out & Parts Clear and Colored
Clear about 60% and Colored 40%, some with adhesive backing.
Available full load"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Origin: Germany
Code: 2025645ML
Material: PET Rollls Natural
Category: PET
Type: Rollls
Color: Natural
Quantity: 17 Tons
Loading weight: 20-22 Tons
Specification: "it is regular supply, no coating, from Germany
2-3 containers per 5-6 weeks time
the thickness info and you decide it is sheet or film
appr. 160 m - 1400 m (= 0.16 mm - 1.40 mm),
mostly the thickness is appr. 900 m (= 0.90 mm)"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Origin: United States
Code: 202537SP
Material: PMMA Regrind Natural
Category: PMMA
Type: Regrind
Color: Natural
Quantity: 8 Tons
Loading weight: 18 Tons
Specification:"Combine load:
PMMA regrind - natural
PMMA regrind - Mix colors
Loading weight: 40k lbs / 40HC container
TDS attached files
Material will be pure PMMA. It does have an LDPE layer of masking that goes over it and we grind the sheet like that.
Each container will vary sometimes it s 75% natural in 25% mixed color sometimes its 50-50."
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Origin: USA
Material: PMMA Regrind Clear/Injection grade
Category: PMMA
Type: Regrind
Color: Clear
Grade: Injection grade
Quantity: 6 Tons
Loading weight:21 Tons
Specification: "PMMA combine load:
- 5 Tons of black & 2tons mix colour regrind from Car part Injection grade
- 6 tons of Natural regrind from Car part Injection grade
- 8 tons of LCD Sheet extrusion grade
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
